Can't login in boot-loader.com - GSM-Forum

Panthereitor · 01-25-2008, 00:50

Hello Smatclip.

i can't login at boot-loader.com

always get this error:

login... inet error: cannot connect to the server

Thanks for support

vanhh · 01-25-2008, 04:56

The same when i try to repair PDS of V3r

SmartMoto 3.04
S-Card: 26****** Smart-Clip dongle, v 2.01, assigned Smart-Clip: 36****** Europe, initializing... OK
Clip serial: 36******, version: 4.01, initializing... OK
Searching for phone... found S Blank Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 3.00
Reading flash id... ST - M30L0R8000B0
Reading flash id/2... none, OK
Phone group: V235,V360,V360v,V3i,V3r,L7,L7e,L7v,L71,L72,L9,K1,W 490,W510,Z3
Hardware IMEI: 35771***************
IMEI OTP status: locked
Security area saved to "PDS for S Blank Neptune LTE2 35771*********xx (6).mbk"
connecting to server... cannot connect to the server
connecting to server... cannot connect to the server
connecting to server... cannot connect to the server

davilixian · 01-25-2008, 05:30

I got the same problem..

vanhh · 01-25-2008, 08:07

Still now cannot connect to the server!
SC Support, check Ur server, pls!

Mr.Tinkertrain · 01-25-2008, 08:51

Please make sure that:
1. Firewall on your computer (or your LAN) is configured properly or disabled
2. You have reliable Internet connection
3. LPT port settings are set to EPP in BIOS
4. Your LPT cable works properly
5. You use a stable power supply with your clip (use power adapter)
6. Your IE version is not lower than v5.0
7. If you run update under WinXP, log in as Administrator or any other account with administrative rights
8. You should clear cache of your browser and restart the computer.

To run a new SmartMoto under WinXP also to update a Smart-Clip please
launch the SM-tool, open Smart-Clip bookmark & tick the option "Disable OS parallel port polling (requires reboot)".
After that restart you PC.
Also set LPT options in SmartMoto to compatibility

Windows XP SP2: if you have problems running unsigned ActiveX, please open
Tools > Internet Options > Security > Custom Level
and change "Download unsigned ActiveX controls" to "Prompt"

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

Panthereitor · 01-25-2008, 15:25

Can u tellme how to clear cache of my browser ???

Thanks a lot

01-25-2008, 00:50	#1 (permalink)
Panthereitor Freak Poster Join Date: Dec 2006 Location: CochabambaBoliviaSouthAmerica Age: 40 Posts: 297 Member: 417468 Status: Offline Thanks Meter: 7	Can't login in boot-loader.com Hello Smatclip. i can't login at boot-loader.com always get this error: login... inet error: cannot connect to the server Thanks for support

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
i can't login at boot-loader.com	ana_ye	Smart-Clip	1	04-15-2009 09:59
Smar-Clip Can't Login to Boot-Loader	.:Towhid:.	Smart-Clip	14	01-17-2009 16:22
i can,t register my dream box in boot-loader.com	MOSHIRGSM	DreamBox	2	12-10-2008 08:58
can't log in boot loader support,help..pls.	saiful2001	Smart-Clip	1	02-13-2007 12:47
what fullflash to repair blue screen in boot-loader.com	GOODNESS	Smart-Clip	1	08-28-2006 19:45

01-25-2008, 04:56	#2 (permalink)
vanhh No Life Poster Join Date: Jul 2004 Posts: 504 Member: 71603 Status: Offline Thanks Meter: 31	The same when i try to repair PDS of V3r SmartMoto 3.04 S-Card: 26**** Smart-Clip dongle, v 2.01, assigned Smart-Clip: 36** Europe, initializing... OK Clip serial: 36**, version: 4.01, initializing... OK Searching for phone... found S Blank Neptune LTE2, getting test interface... interface not found Switching to flash mode... OK Reading phone boot version... 3.00 Reading flash id... ST - M30L0R8000B0 Reading flash id/2... none, OK Phone group: V235,V360,V360v,V3i,V3r,L7,L7e,L7v,L71,L72,L9,K1,W 490,W510,Z3 Hardware IMEI: 35771*********** IMEI OTP status: locked Security area saved to "PDS for S Blank Neptune LTE2 35771*******xx (6).mbk" connecting to server... cannot connect to the server connecting to server... cannot connect to the server connecting to server... cannot connect to the server

01-25-2008, 05:30	#3 (permalink)
davilixian Freak Poster Join Date: Mar 2006 Location: ShenZhen China Age: 41 Posts: 321 Member: 251676 Status: Offline Thanks Meter: 45	I got the same problem..

01-25-2008, 08:07	#4 (permalink)
vanhh No Life Poster Join Date: Jul 2004 Posts: 504 Member: 71603 Status: Offline Thanks Meter: 31	Still now cannot connect to the server! SC Support, check Ur server, pls!

01-25-2008, 08:51	#5 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	Please make sure that: 1. Firewall on your computer (or your LAN) is configured properly or disabled 2. You have reliable Internet connection 3. LPT port settings are set to EPP in BIOS 4. Your LPT cable works properly 5. You use a stable power supply with your clip (use power adapter) 6. Your IE version is not lower than v5.0 7. If you run update under WinXP, log in as Administrator or any other account with administrative rights 8. You should clear cache of your browser and restart the computer. To run a new SmartMoto under WinXP also to update a Smart-Clip please launch the SM-tool, open Smart-Clip bookmark & tick the option "Disable OS parallel port polling (requires reboot)". After that restart you PC. Also set LPT options in SmartMoto to compatibility Windows XP SP2: if you have problems running unsigned ActiveX, please open Tools > Internet Options > Security > Custom Level and change "Download unsigned ActiveX controls" to "Prompt" Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

01-25-2008, 15:25	#6 (permalink)
Panthereitor Freak Poster Join Date: Dec 2006 Location: CochabambaBoliviaSouthAmerica Age: 40 Posts: 297 Member: 417468 Status: Offline Thanks Meter: 7	Can u tellme how to clear cache of my browser ??? Thanks a lot