Can't unlock a E1070 - GSM-Forum

The Repair Shop · 05-21-2007, 07:22

I used testpoint and the prepare metouhed to unlock this phone but sill after all that the phone is still looked?

The phone is BootLoader 0.6.8.1 SW:R252211LD_U_85.97.F11P.

Is they anyway to unlock this phone?

Mr.Tinkertrain · 05-21-2007, 07:24

Quote:

SmartMoto 2.21
S-Card: 12******* Smart-Clip dongle, v 1.17, assigned Smart-Clip: 35******* Europe, initializing... OK
Clip serial: 35*******, version: 3.16, initializing... OK
Searching for phone... found Motorola Phone (E1070), getting test interface... OK
Model E1070
Firmware R252211LD_U_85.97.F11P
Switching to flash mode... OK [S Flash Rainbow POG]
Reading phone boot version... 6.81
Sending boot... OK
Performing backup to temporary file
Stored temporary backup to C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_97662C2C8C3C2202.bk_
Backup OK
Erasing flash memory error 80
Searching for phone... found Motorola Phone (E1070), getting test interface... OK
Switching to flash mode... OK [S Flash Rainbow POG]
Reading phone boot version... 6.81
Sending boot... OK
Erasing flash memory OK
Sending firmware OK
Searching for phone... found S Blank Rainbow POG
Switching to flash mode... OK
Reading phone boot version... 3.10
Reading flash id... Intel - 28F256L18B (x2)
Phone group: E770,E1000,E1070,V3x,V975,V1050
Hardware IMEI: 356853002438630
Security area saved to "PDS for S Blank Rainbow POG 356853002438630.mbk"
Performing restore from temparary backup file C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_97662C2C8C3C2202.bk_
Restore OK
Unlocking phone... OK

Warning message doesn't appear. In such case firmware version can be downgraded and after that the handset can be unlocked.

In this case:

Quote:

SmartMoto 2.19
S-Card: bla bla Smart-Clip dongle, v 1.15, assigned Smart-Clip: xxxxxxxxxx Europe, initializing... OK
Clip serial: xxxxxxxxxxxx, version: 3.14, initializing... OK
Searching for phone... found S Blank Rainbow POG, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 3.10
Reading flash id... Intel - 28F256L18B (x2)
Phone group: E770,E1000,E1070,V3x,V975,V1050
Hardware IMEI: xxxxxxxxxxxx
WARNING! Your phone may not power on after downgrading firmware version. This phone can be unlocked only via patching.
Security area saved to "PDS for S Blank Rainbow POG xxxxxxxxxxxxxxxx (3).mbk"
Login request... OK
Writing flash section 2 of 2... 100% (83.6 Kb/sec)
Restarting phone... OK
Searching for phone... found S Blank Rainbow POG
Switching to flash mode... OK
WARNING! Your phone may not power on after downgrading firmware version. This phone can be unlocked only via patching.
Repair PDS request... OK
Performing PDS repair... OK
Writing flash section 1 of 1... 100% (20.2 Kb/sec)
Please write a corresponding Full_flash file to phone to complete repair
Writing flash section 2 of 2... 100% (81.7 Kb/sec)
Turning phone off... OK
Flash completed!

Warning message appears, the handset can not be unlocked. If firmware version will be downgraded the handset won't turn on and to revive it the phone should be flashed with backup or with R252211LD_U_85.97.F11P firmware version.

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

The Repair Shop · 05-21-2007, 08:30

What ar you trying to say here?

Mr.Tinkertrain · 05-21-2007, 08:47

@ Simzmobiles,

If during unlock procedure of E1070 with firmware version R252211LD_U_85.97.F11P WARNING message doesn't appear, then firmware version can be downgraded and handset can be unlocked.

If WARNING message appears , then the handset can not be unlocked, at this moment. As written in the log file

Quote:

This phone can be unlocked only via patching.

Patch for this phone model (E1070) is under development.

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

**GSM MIND** · 05-23-2007, 15:55

Quote:

Originally Posted by Mr.Tinkertrain

@ Simzmobiles,

If during unlock procedure of E1070 with firmware version R252211LD_U_85.97.F11P WARNING message doesn't appear, then firmware version can be downgraded and handset can be unlocked.

If WARNING message appears , then the handset can not be unlocked, at this moment. As written in the log file Patch for this phone model (E1070) is under development.

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

u mean we need to downgrade the fone for unlocking which file we need to do this

REGARDS

GSM MIND

Mr.Tinkertrain · 05-23-2007, 16:07

@ GSM MIND,

If Warning message doesn't appears firmware version can be downgraded. You can use any full flash file.

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

**GSM MIND** · 05-23-2007, 16:50

thanx mate but i didnt get any file just asking about which firmware we need to use for downgrading

REGARDS

GSM MIND

Mr.Tinkertrain · 05-24-2007, 10:02

@ GSM MIND,

Firmware version, in this phone model, can be downgraded via TP (If Warning message doesn't appear) with any lower full flash file, for example this one e1070_r252211ld_u_85.97.c6p_lp0039_full_flash.mfw

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

**GSM MIND** · 05-24-2007, 16:07

okey i well try on it with tp mehtod

REGARDS

GSM MIND

mp3hot · 05-31-2007, 00:32

got a e1070 version r252211ld_u_85.97.f11p (boot version 6.81)

entered flash mode to unlock via patch

Switching to flash mode... OK [S Flash Rainbow POG]
Reading phone boot version... 6.81
Boot prepare... failed

On fone displays error(below) after entering FLASH MODE , around 2 seconds after entered flash mode , then will power off few seconds later .

Critical Error
80
40

mp3hot · 05-31-2007, 01:12

followed instructions on: http://www.smart-clip.com/support.ph..._Non-TestPoint

tried to unlock e1070 and remained locked , i followed from Step 1 - 13 , i didnt continue doing step 14-17 cause at end of step 13 Smartmoto displayed PHONE UNLOCKED . im using smart moto v 2.23 , shall i re do procedure and continue step 14-17 . also i cannot understand on the instrutions when it says "Log to bookmark" what does it mean?

SmartMoto 2.23
S-Card: 69 Smart-Clip dongle, v 1.24, assigned Smart-Clip: 69 Europe, initializing... OK
Clip serial: 69, version: 3.17, initializing... OK
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... found Motorola Phone (E1070), getting test interface... OK
Model E1070
Firmware R252211LD_U_85.97.F11P
Switching to flash mode... OK [S Flash Rainbow POG]
Reading phone boot version... 6.81
Sending boot... OK
Performing backup to temporary file
Stored temporary backup to C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_F7661C6C8C9C2272.bk_
Backup OK
Erasing flash memory error 80
Searching for phone... found Motorola Phone (E1070), getting test interface... OK
Switching to flash mode... OK [S Flash Rainbow POG]
Reading phone boot version... 6.81
Sending boot... OK
Erasing flash memory OK
Sending firmware OK
Searching for phone... found S Blank Rainbow POG
Switching to flash mode... OK
Reading phone boot version... 3.10
Reading flash id... Intel - 28F256L18B (x2)
Phone group: E770,E1000,E1070,V3x,V975,V1050
Hardware IMEI: 356*
WARNING! Your phone may not power on after downgrading firmware version. This phone can be unlocked only via patching.
Security area saved to "PDS for S Blank Rainbow POG 356*.mbk"
Performing restore from temparary backup file C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_F7661C6C8C9C2272.bk_
Restore OK
Unlocking phone... OK

my bad now i saw the warning message on log file ... so my fone cannot be unlocked right ? no way whats so ever ?

"WARNING! Your phone may not power on after downgrading firmware version"

Mr.Tinkertrain · 05-31-2007, 07:19

@ mp3hot,

From now, this phone model (E1070 f/w ...F11P) can be unlocked with Smart-Clip.
Left side of SmartMoto made from bookmarks (such as "Information", "Service", "Repair", "Flash" etc).The meaning of "Log to bookmark " is select required option in menu.

Here is the complete manual for unlock procedure of this handset:
Connect powered ON handset to PC via Smart-Clip (phone > USB cable > Smart-Clip > LPT cable > PC).

Connect S-Card to PC USB port.
Connect power supply to Smart-Clip and power on the handset.
Launch SmartMoto.
Choose "Smart-Clip USB port" in phone connection window.
Press "Search". Software should perform the following steps:
- SmartMoto detects S-Card;
- SmartMoto detects Smart-Clip;
- SmartMoto detects the handset and reads all information.
Log to bookmark "Prepare" (select "Prepare" in SmartMoto).
Select the appropriate model from SmartMoto list. Make sure that phone model and boot version of the phone to be unlocked exactly match the model and boot version stated in the list. "Unlock automatically..." should be marked off
Press "Prepare" button.
The prepare cycle starts. SmartMoto creates a Temporary Backup File from the handset firmware.
At this time popup window appears at SmartMoto interface. Please follow the instructions provided therein
- Disconnect cable from the phone;
- Remove and insert phone’s battery;
- Press "Power on" key on the phone. Phone's LCD remains blank;
- Connect cable to the phone;
- Press OK in SmartMoto.
The handset should be detected by SmartMoto as "S Blank..."
SmartMoto restores the temporary backup file.
Log to bookmark "Unlock" (select "Unlock" in SmartMoto).
Select E1070 from "Unlock via patch" list.
Press "Unlock via patch" button.
Wait for the process to complete.
Phone is unlocked.

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

sunny_cool · 05-31-2007, 07:41

////////////////////////////////////////////////////////////

sunny_cool · 05-31-2007, 10:30

Ooops so sorry i was not following the proper steps to unlock....thanks for such a nice support Smart-clip team...Unlocked sucessfully

mp3hot · 05-31-2007, 15:12

tanks mr tinkertrain
fone is now unlocked .

step 6 : log to bookmark prepare , choose fone model on list , check unlock automatically after prepare and click on "prepare fone" .

i think your step 6 is bad caz it says to prepare fone before u actually choose the model .

05-21-2007, 07:22	#1 (permalink)
The Repair Shop No Life Poster Join Date: Feb 2003 Location: In My Pub Posts: 5,828 Member: 307549 Status: Offline Thanks Meter: 188	Can't unlock a E1070 I used testpoint and the prepare metouhed to unlock this phone but sill after all that the phone is still looked? The phone is BootLoader 0.6.8.1 SW:R252211LD_U_85.97.F11P. Is they anyway to unlock this phone?

05-31-2007, 07:19	#12 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ mp3hot, From now, this phone model (E1070 f/w ...F11P) can be unlocked with Smart-Clip. Left side of SmartMoto made from bookmarks (such as "Information", "Service", "Repair", "Flash" etc).The meaning of "Log to bookmark " is select required option in menu. Here is the complete manual for unlock procedure of this handset: Connect powered ON handset to PC via Smart-Clip (phone > USB cable > Smart-Clip > LPT cable > PC). Connect S-Card to PC USB port. Connect power supply to Smart-Clip and power on the handset. Launch SmartMoto. Choose "Smart-Clip USB port" in phone connection window. Press "Search". Software should perform the following steps: SmartMoto detects S-Card; SmartMoto detects Smart-Clip; SmartMoto detects the handset and reads all information. Log to bookmark "Prepare" (select "Prepare" in SmartMoto). Select the appropriate model from SmartMoto list. Make sure that phone model and boot version of the phone to be unlocked exactly match the model and boot version stated in the list. "Unlock automatically..." should be marked off Press "Prepare" button. The prepare cycle starts. SmartMoto creates a Temporary Backup File from the handset firmware. At this time popup window appears at SmartMoto interface. Please follow the instructions provided therein Disconnect cable from the phone; Remove and insert phone’s battery; Press "Power on" key on the phone. Phone's LCD remains blank; Connect cable to the phone; Press OK in SmartMoto. The handset should be detected by SmartMoto as "S Blank..." SmartMoto restores the temporary backup file. Log to bookmark "Unlock" (select "Unlock" in SmartMoto). Select E1070 from "Unlock via patch" list. Press "Unlock via patch" button. Wait for the process to complete. Phone is unlocked. Best Regards Smart-clip team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com Last edited by GSM_Support; 05-31-2007 at 08:17.

05-31-2007, 07:41	#13 (permalink)
sunny_cool No Life Poster Join Date: Apr 2005 Age: 42 Posts: 539 Member: 138217 Status: Offline Thanks Meter: 16	//////////////////////////////////////////////////////////// Last edited by GSM_Support; 05-31-2007 at 08:04. Reason: Contained serial number

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
patch unlock motorola E1070	ej_cellulaire	Smart-Clip	1	08-19-2009 21:41
looking for help unlocking an E1070	lookingforhelp	Motorola P2k	1	04-14-2009 16:10
Unlock my E1070	anubis0908	GOT Motorola	7	05-27-2008 22:13
Problem unlocking Motorola E1070	jontyjonty	Smart-Clip	1	10-17-2007 08:01
New to this... I want to unlock/debrand E1070	Lezam	Motorola P2k	0	07-20-2006 00:31

05-21-2007, 08:30	#3 (permalink)
The Repair Shop No Life Poster Join Date: Feb 2003 Location: In My Pub Posts: 5,828 Member: 307549 Status: Offline Thanks Meter: 188	What ar you trying to say here?

05-23-2007, 16:07	#6 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ GSM MIND, If Warning message doesn't appears firmware version can be downgraded. You can use any full flash file. Best Regards Smart-clip team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

05-23-2007, 16:50	#7 (permalink)
GSM MIND Product Manager Join Date: Feb 2003 Location: Your Exclusive Source Posts: 2,881 Member: 20645 Status: Offline Sonork: 100.1579175 Thanks Meter: 635	thanx mate but i didnt get any file just asking about which firmware we need to use for downgrading REGARDS GSM MIND

05-24-2007, 10:02	#8 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ GSM MIND, Firmware version, in this phone model, can be downgraded via TP (If Warning message doesn't appear) with any lower full flash file, for example this one e1070_r252211ld_u_85.97.c6p_lp0039_full_flash.mfw Best Regards Smart-clip team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

05-24-2007, 16:07	#9 (permalink)
GSM MIND Product Manager Join Date: Feb 2003 Location: Your Exclusive Source Posts: 2,881 Member: 20645 Status: Offline Sonork: 100.1579175 Thanks Meter: 635	okey i well try on it with tp mehtod REGARDS GSM MIND

05-31-2007, 00:32	#10 (permalink)
mp3hot No Life Poster Join Date: Dec 2001 Location: Prussia Posts: 3,297 Member: 7844 Status: Offline Thanks Meter: 182	got a e1070 version r252211ld_u_85.97.f11p (boot version 6.81) entered flash mode to unlock via patch Switching to flash mode... OK [S Flash Rainbow POG] Reading phone boot version... 6.81 Boot prepare... failed On fone displays error(below) after entering FLASH MODE , around 2 seconds after entered flash mode , then will power off few seconds later . Critical Error 80 40

05-31-2007, 01:12	#11 (permalink)
mp3hot No Life Poster Join Date: Dec 2001 Location: Prussia Posts: 3,297 Member: 7844 Status: Offline Thanks Meter: 182	followed instructions on: http://www.smart-clip.com/support.ph..._Non-TestPoint tried to unlock e1070 and remained locked , i followed from Step 1 - 13 , i didnt continue doing step 14-17 cause at end of step 13 Smartmoto displayed PHONE UNLOCKED . im using smart moto v 2.23 , shall i re do procedure and continue step 14-17 . also i cannot understand on the instrutions when it says "Log to bookmark" what does it mean? SmartMoto 2.23 S-Card: 69 Smart-Clip dongle, v 1.24, assigned Smart-Clip: 69 Europe, initializing... OK Clip serial: 69, version: 3.17, initializing... OK Searching for phone... no phone found Searching for phone... no phone found Searching for phone... found Motorola Phone (E1070), getting test interface... OK Model E1070 Firmware R252211LD_U_85.97.F11P Switching to flash mode... OK [S Flash Rainbow POG] Reading phone boot version... 6.81 Sending boot... OK Performing backup to temporary file Stored temporary backup to C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_F7661C6C8C9C2272.bk_ Backup OK Erasing flash memory error 80 Searching for phone... found Motorola Phone (E1070), getting test interface... OK Switching to flash mode... OK [S Flash Rainbow POG] Reading phone boot version... 6.81 Sending boot... OK Erasing flash memory OK Sending firmware OK Searching for phone... found S Blank Rainbow POG Switching to flash mode... OK Reading phone boot version... 3.10 Reading flash id... Intel - 28F256L18B (x2) Phone group: E770,E1000,E1070,V3x,V975,V1050 Hardware IMEI: 356* WARNING! Your phone may not power on after downgrading firmware version. This phone can be unlocked only via patching. Security area saved to "PDS for S Blank Rainbow POG 356*.mbk" Performing restore from temparary backup file C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_F7661C6C8C9C2272.bk_ Restore OK Unlocking phone... OK my bad now i saw the warning message on log file ... so my fone cannot be unlocked right ? no way whats so ever ? "WARNING! Your phone may not power on after downgrading firmware version"

05-31-2007, 10:30	#14 (permalink)
sunny_cool No Life Poster Join Date: Apr 2005 Age: 42 Posts: 539 Member: 138217 Status: Offline Thanks Meter: 16	Ooops so sorry i was not following the proper steps to unlock....thanks for such a nice support Smart-clip team...Unlocked sucessfully

05-31-2007, 15:12	#15 (permalink)
mp3hot No Life Poster Join Date: Dec 2001 Location: Prussia Posts: 3,297 Member: 7844 Status: Offline Thanks Meter: 182	tanks mr tinkertrain fone is now unlocked . step 6 : log to bookmark prepare , choose fone model on list , check unlock automatically after prepare and click on "prepare fone" . i think your step 6 is bad caz it says to prepare fone before u actually choose the model .