Change imei to v3 boot 8.29 - GSM-Forum

killer84p · 04-23-2008, 20:13

Hi guys , I have a v3 with boot 8.29 and I want to patch imei , but with remove rsa , prepare , repair etc , the phone have always this boot and when I try to patch the phone for the imei the led on the SC are red.

How I can do this patch without tp or with an easy tp

Thanks a lot

BR

Pierpaolo

Mr.Tinkertrain · 04-24-2008, 07:35

IMEI section of SmartMoto service software was implemented by developer of this program for repair (original IMEI restore) purposes only!
For some models IMEI could be restored simply by connecting the handset to SmartMoto via Smart-Clip as for flashing.
Some models require to be flashed with “IMEI repair firmware patch”, only after that IMEI could be restored.
In some cases flash chip on phone’s PCB requires to be replaced, to allow user to restore IMEI.

However, every user that applies to this option must remember the original IMEI to be able to restore it. In any case if SmartMoto user, during phone repair process, applies IMEI that differs from the original IMEI, which was previously set with the phone, is doing that on his own responsibility.

Developer of SmartMoto software does not take any responsibility for any incorrect use of that program.

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

killer84p · 04-24-2008, 13:30

Yes Mr.Tinkertrain I want to insert the original imei , but when I try to do this I have problem with this boot version .

Can you help me please?

Tnx

Pierpaolo

Mr.Tinkertrain · 04-24-2008, 13:35

@ killer84p,

Perform Prepare cycle, after that ptach IMEi and Restore ORIGINAl IMEI number.

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

killer84p · 04-24-2008, 15:18

i do prepare cycle , unlock the phone and when I try to patch the firmware for write THE ORIGINAL IMEI the light on SC are red , and smartmoto says boot failed.

How i can solve the problem?

Br

Pierpaolo

Mr.Tinkertrain · 04-24-2008, 15:29

@ killer84p,

Show us log file, please.
Don't forget to hide your serial numbers.

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

04-23-2008, 20:13	#1 (permalink)
killer84p Freak Poster Join Date: Jan 2006 Posts: 201 Member: 224919 Status: Offline Thanks Meter: 3	Change imei to v3 boot 8.29 Hi guys , I have a v3 with boot 8.29 and I want to patch imei , but with remove rsa , prepare , repair etc , the phone have always this boot and when I try to patch the phone for the imei the led on the SC are red. How I can do this patch without tp or with an easy tp Thanks a lot BR Pierpaolo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need V3 boot 8.29 file	GuilleC_PMA	Smart-Clip	5	08-18-2008 13:18
UBL cant change imei to V3 R374	cellularman	Ultima Box Light	22	02-01-2008 19:45
v3 boot 8.29 change lp	fm.it	Motorola P2k	2	05-08-2007 10:49
how to unlock a v3 boot 8.29?????????	rovelo	Smart-Clip	3	02-02-2007 17:16
How To V3 Boot 8.29 Unlock	faisal ch	Motorola P2k	6	02-02-2007 16:26

04-24-2008, 07:35	#2 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	IMEI section of SmartMoto service software was implemented by developer of this program for repair (original IMEI restore) purposes only! For some models IMEI could be restored simply by connecting the handset to SmartMoto via Smart-Clip as for flashing. Some models require to be flashed with “IMEI repair firmware patch”, only after that IMEI could be restored. In some cases flash chip on phone’s PCB requires to be replaced, to allow user to restore IMEI. However, every user that applies to this option must remember the original IMEI to be able to restore it. In any case if SmartMoto user, during phone repair process, applies IMEI that differs from the original IMEI, which was previously set with the phone, is doing that on his own responsibility. Developer of SmartMoto software does not take any responsibility for any incorrect use of that program. Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

04-24-2008, 13:30	#3 (permalink)
killer84p Freak Poster Join Date: Jan 2006 Posts: 201 Member: 224919 Status: Offline Thanks Meter: 3	Yes Mr.Tinkertrain I want to insert the original imei , but when I try to do this I have problem with this boot version . Can you help me please? Tnx Pierpaolo

04-24-2008, 13:35	#4 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ killer84p, Perform Prepare cycle, after that ptach IMEi and Restore ORIGINAl IMEI number. Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

04-24-2008, 15:18	#5 (permalink)
killer84p Freak Poster Join Date: Jan 2006 Posts: 201 Member: 224919 Status: Offline Thanks Meter: 3	i do prepare cycle , unlock the phone and when I try to patch the firmware for write THE ORIGINAL IMEI the light on SC are red , and smartmoto says boot failed. How i can solve the problem? Br Pierpaolo

04-24-2008, 15:29	#6 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ killer84p, Show us log file, please. Don't forget to hide your serial numbers. Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com