Dear Supporter While Unlocking V190[o.8.a0] - GSM-Forum

chiragp · 12-15-2006, 06:51

I THINK NOW IT NEED TO FIX BUGS FOR NEW VERSION

WHILE MAKING UNLOCKING V190 I GOT ERROR

LOG

SmartMoto 2.04
S-Card: .......... Smart-Clip dongle, v 1.03, assigned Smart-Clip: .......Europe, initializing... OK
Clip serial: ......., version: 3.03, initializing... OK
Searching for phone... found Motorola Phone (V190), getting test interface... OK
Model V190
Firmware R3511_G_0A.50.2DR
Switching to flash mode... OK [S Flash Neptune LTE]
Reading phone boot version... 8.A0
Sending boot... OK

Erasing flash memory OK
Sending firmware OK
Searching for phone... found S Flash Neptune LTE
Switching to flash mode... OK
Reading phone boot version... 8.A0
Sending boot... 98%

AFTER THIS I GOT RDL SIG ERROR IN [PHONE]

TRIED 3 TIMES SAME PROCEDURE STOPS ON 98%
Non-TestPoint unlocking procedure

The following models can be served avoiding a TestPoint connection:
Model Boot version
C390 8.26
E1 A.02
Å378i 8.25
L2 8.D0
L2 8.D5
L6 8.D0
L6 8.D5
L7 8.D0
L7 A.20
U6 8.A1
V190 8.A0
V190 8.D0
V19x 8.D5
V235 8.E0
V360 8.A0
V360 8.D0
V3i A.30
V3r A.30
V557 8.B0

Please, be aware of the new unlock procedure:

1. Connect the handset to PC via Smart-Clip (phone > USB cable > Smart-Clip > LPT cable > PC).
2. Connect S-Card to PC USB port.
3. Connect power supply to Smart-Clip and power on the handset.
4. Launch SmartMoto.
5. Choose "Smart-Clip USB port" in phone connection window.
6. Press "Search". The software should perform the following steps:
* SmartMoto detects S-Card;
* SmartMoto detects Smart-Clip;
* SmartMoto detects the handset and reads all phone information.
7. Log to bookmark "Prepare".
8. Select the appropriate model from SmartMoto list. Make sure that phone model and boot version of the phone to be unlocked exactly match the model and boot version stated in the list.
9. For unlock purposes, please make sure that "Unlock automatically" option is mark.
10. Press "Prepare" button.
11. Part of phone firmware gets reflashed. At this time popup window appears at SmartMoto interface. Please follow the instructions provided therein:
* Disconnect cable from the phone;
* Remove and insert phone’s battery;
* Press "Power on" key on the phone. Phone's LCD will not contain any information;
* Connect cable to the phone;
* Press OK in SmartMoto.
12. he handset should be detected by SmartMoto as "S Blank..."
13. If the option "Unlock automatically" was marked – the handset becomes unlocked.

chiragp · 12-15-2006, 07:07

Downloads disabled. Smart-Clip (serial number: .........) is authorized. But your account time limit has expired.

I ALSO GET THIS DISPLAY ON BOOT -LOADER SUPPORT NEED SOME EXPLAINATION

chiragp · 12-15-2006, 09:58

same on full flash error stop on 98%

log

SmartMoto 2.04
S-Card: Smart-Clip dongle, v 1.03, assigned Smart-Clip: Europe, initializing... OK
Clip serial:, version: 3.03, initializing... OK
Searching for phone... found S Flash Neptune LTE, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 8.A0
load error

GSM_Support · 12-15-2006, 10:07

Please, make sure you perform all steps correctly.

Quote:

10. Press “Prepare” button.
11. Part of phone firmware gets reflashed. At this time popup window appears at SmartMoto interface. Please follow the instructions provided therein:
- Disconnect cable from the phone;
- Remove and insert phone’s battery;
- Press "Power on" key on the phone. Phone's LCD will not contain any information;
- Connect cable to the phone;
Press OK in SmartMoto.
12. The handset should be detected by SmartMoto as "S Blank...".

Best Regards
GSMServer team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

Genius · 12-15-2006, 10:14

Quote:

Originally Posted by chiragp

I THINK NOW IT NEED TO FIX BUGS FOR NEW VERSION

WHILE MAKING UNLOCKING V190 I GOT ERROR

LOG

SmartMoto 2.04
S-Card: .......... Smart-Clip dongle, v 1.03, assigned Smart-Clip: .......Europe, initializing... OK
Clip serial: ......., version: 3.03, initializing... OK
Searching for phone... found Motorola Phone (V190), getting test interface... OK
Model V190
Firmware R3511_G_0A.50.2DR
Switching to flash mode... OK [S Flash Neptune LTE]
Reading phone boot version... 8.A0
Sending boot... OK

Erasing flash memory OK
Sending firmware OK
Searching for phone... found S Flash Neptune LTE
Switching to flash mode... OK
Reading phone boot version... 8.A0
Sending boot... 98%

AFTER THIS I GOT RDL SIG ERROR IN [PHONE]

TRIED 3 TIMES SAME PROCEDURE STOPS ON 98%
Non-TestPoint unlocking procedure

The following models can be served avoiding a TestPoint connection:
Model Boot version
C390 8.26
E1 A.02
Å378i 8.25
L2 8.D0
L2 8.D5
L6 8.D0
L6 8.D5
L7 8.D0
L7 A.20
U6 8.A1
V190 8.A0
V190 8.D0
V19x 8.D5
V235 8.E0
V360 8.A0
V360 8.D0
V3i A.30
V3r A.30
V557 8.B0

Please, be aware of the new unlock procedure:

1. Connect the handset to PC via Smart-Clip (phone > USB cable > Smart-Clip > LPT cable > PC).
2. Connect S-Card to PC USB port.
3. Connect power supply to Smart-Clip and power on the handset.
4. Launch SmartMoto.
5. Choose "Smart-Clip USB port" in phone connection window.
6. Press "Search". The software should perform the following steps:
* SmartMoto detects S-Card;
* SmartMoto detects Smart-Clip;
* SmartMoto detects the handset and reads all phone information.
7. Log to bookmark "Prepare".
8. Select the appropriate model from SmartMoto list. Make sure that phone model and boot version of the phone to be unlocked exactly match the model and boot version stated in the list.
9. For unlock purposes, please make sure that "Unlock automatically" option is mark.
10. Press "Prepare" button.
11. Part of phone firmware gets reflashed. At this time popup window appears at SmartMoto interface. Please follow the instructions provided therein:
* Disconnect cable from the phone;
* Remove and insert phone’s battery;
* Press "Power on" key on the phone. Phone's LCD will not contain any information; * Connect cable to the phone;
* Press OK in SmartMoto.
12. he handset should be detected by SmartMoto as "S Blank..."
13. If the option "Unlock automatically" was marked – the handset becomes unlocked.

Pay attention to red font's and their meaning. Try again like described...

chiragp · 12-15-2006, 10:18

ok i have completed 1 step
now it says write flash into phone

WE HAVE TO FULL FLASH IT OR REFLASH

Genius · 12-15-2006, 10:19

Quote:

Originally Posted by chiragp

ok i have completed 1 step
now it says write flash into phone

WE HAVE TO FULL FLASH IT OR REFLASH

Reflash is enough...

Genius · 12-15-2006, 12:59

Also I have test V3v with boot 0A.30, unlocked without TP by selecting
V3r, phone working OK. Just tip to SC team...

12-15-2006, 06:51	#1 (permalink)
chiragp Cheater -Don't Deal with him- Join Date: Jan 2005 Location: U S A / GOA /CHINA Age: 44 Posts: 6,848 Member: 106367 Status: Offline Sonork: 100.1577436 Thanks Meter: 2,452	Dear Supporter While Unlocking V190[o.8.a0] I THINK NOW IT NEED TO FIX BUGS FOR NEW VERSION WHILE MAKING UNLOCKING V190 I GOT ERROR LOG SmartMoto 2.04 S-Card: .......... Smart-Clip dongle, v 1.03, assigned Smart-Clip: .......Europe, initializing... OK Clip serial: ......., version: 3.03, initializing... OK Searching for phone... found Motorola Phone (V190), getting test interface... OK Model V190 Firmware R3511_G_0A.50.2DR Switching to flash mode... OK [S Flash Neptune LTE] Reading phone boot version... 8.A0 Sending boot... OK Erasing flash memory OK Sending firmware OK Searching for phone... found S Flash Neptune LTE Switching to flash mode... OK Reading phone boot version... 8.A0 Sending boot... 98% AFTER THIS I GOT RDL SIG ERROR IN [PHONE] TRIED 3 TIMES SAME PROCEDURE STOPS ON 98% Non-TestPoint unlocking procedure The following models can be served avoiding a TestPoint connection: Model Boot version C390 8.26 E1 A.02 Å378i 8.25 L2 8.D0 L2 8.D5 L6 8.D0 L6 8.D5 L7 8.D0 L7 A.20 U6 8.A1 V190 8.A0 V190 8.D0 V19x 8.D5 V235 8.E0 V360 8.A0 V360 8.D0 V3i A.30 V3r A.30 V557 8.B0 Please, be aware of the new unlock procedure: 1. Connect the handset to PC via Smart-Clip (phone > USB cable > Smart-Clip > LPT cable > PC). 2. Connect S-Card to PC USB port. 3. Connect power supply to Smart-Clip and power on the handset. 4. Launch SmartMoto. 5. Choose "Smart-Clip USB port" in phone connection window. 6. Press "Search". The software should perform the following steps: * SmartMoto detects S-Card; * SmartMoto detects Smart-Clip; * SmartMoto detects the handset and reads all phone information. 7. Log to bookmark "Prepare". 8. Select the appropriate model from SmartMoto list. Make sure that phone model and boot version of the phone to be unlocked exactly match the model and boot version stated in the list. 9. For unlock purposes, please make sure that "Unlock automatically" option is mark. 10. Press "Prepare" button. 11. Part of phone firmware gets reflashed. At this time popup window appears at SmartMoto interface. Please follow the instructions provided therein: * Disconnect cable from the phone; * Remove and insert phone’s battery; * Press "Power on" key on the phone. Phone's LCD will not contain any information; * Connect cable to the phone; * Press OK in SmartMoto. 12. he handset should be detected by SmartMoto as "S Blank..." 13. If the option "Unlock automatically" was marked – the handset becomes unlocked. Last edited by chiragp; 12-15-2006 at 07:05.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
v190 with bootloader over 8.a0, can I just flasher a lower bootloader	charger223	Motorola P2k	1	11-04-2006 14:08
8.A0 < 8.26 ? how to compare?	Cake	LG 3G (USB-Smart)	1	07-02-2006 21:53
8.a0 8.26/6.31	Cake	Motorola P2K (USB-Smart)	1	07-02-2006 19:10
V360v boot loader 8.A0 not supported?	Raklm	Smart-Clip	5	02-08-2006 16:21

12-15-2006, 07:07	#2 (permalink)
chiragp Cheater -Don't Deal with him- Join Date: Jan 2005 Location: U S A / GOA /CHINA Age: 44 Posts: 6,848 Member: 106367 Status: Offline Sonork: 100.1577436 Thanks Meter: 2,452	Downloads disabled. Smart-Clip (serial number: .........) is authorized. But your account time limit has expired. I ALSO GET THIS DISPLAY ON BOOT -LOADER SUPPORT NEED SOME EXPLAINATION

12-15-2006, 09:58	#3 (permalink)
chiragp Cheater -Don't Deal with him- Join Date: Jan 2005 Location: U S A / GOA /CHINA Age: 44 Posts: 6,848 Member: 106367 Status: Offline Sonork: 100.1577436 Thanks Meter: 2,452	same on full flash error stop on 98% log SmartMoto 2.04 S-Card: Smart-Clip dongle, v 1.03, assigned Smart-Clip: Europe, initializing... OK Clip serial:, version: 3.03, initializing... OK Searching for phone... found S Flash Neptune LTE, getting test interface... interface not found Switching to flash mode... OK Reading phone boot version... 8.A0 load error

12-15-2006, 10:18	#6 (permalink)
chiragp Cheater -Don't Deal with him- Join Date: Jan 2005 Location: U S A / GOA /CHINA Age: 44 Posts: 6,848 Member: 106367 Status: Offline Sonork: 100.1577436 Thanks Meter: 2,452	ok i have completed 1 step now it says write flash into phone WE HAVE TO FULL FLASH IT OR REFLASH

12-15-2006, 12:59	#8 (permalink)
Genius No Life Poster Join Date: Jun 2002 Location: City Posts: 618 Member: 12663 Status: Offline Thanks Meter: 78	Also I have test V3v with boot 0A.30, unlocked without TP by selecting V3r, phone working OK. Just tip to SC team...