E1070 dead after flash for unlock.

[mdshad1]

hello,
today i try to unlock one E1070 through smartmoto 3.03 via prepare option the Bootloader was 0x681. this is log file from smartmoto.
SmartMoto 3.03
S-Card: ******** Smart-Clip dongle, v 2.01, assigned Smart-Clip: ********* Europe, initializing... OK
Clip serial: *********, version: 4.01, initializing... OK
Searching for phone... found Motorola Phone (E1070), getting test interface... OK
Model E1070
Firmware R252211LD_U_85.97.F11P
Switching to flash mode... OK [S Flash Rainbow POG]
Reading phone boot version... 6.81
Sending boot... OK
Performing backup to temporary file
Stored temporary backup to C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_57661C3C8CA4220A.bk_
Backup OK
Erasing flash memory error 80
Searching for phone... found Motorola Phone (E1070), getting test interface... OK
Switching to flash mode... OK [S Flash Rainbow POG]
Reading phone boot version... 6.81
Sending boot... OK
Erasing flash memory OK
Sending firmware OK
Searching for phone... found S Blank Rainbow POG
Switching to flash mode... OK
Reading phone boot version... 3.10
Reading flash id... Intel - 28F256L18B (x2)
Phone group: E770,E1000,E1070,V3x,V975,V1050
Hardware IMEI: 356853002963629
WARNING! Your phone may not power on after downgrading firmware version. This phone can be unlocked only via patching.
IMEI OTP status: locked
Security area saved to "PDS for S Blank Rainbow POG 356853002963629.mbk"
Performing restore from temparary backup file C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_57661C3C8CA4220A.bk_
Restore OK
Unlocking phone... OK

but it was still locked so after this i again go for prepare option "unticked unlock option" adn then i flash it with this flash file R252211LD-AS_U_85.92.70R flash ok but now it only keypad blinks not comes on screen smartclip support how can i fix this kindly tell me .
thanksssss

[Mr.Tinkertrain]

@ mdshad1,

What firmware version your handset originally had?
To be able to revive it, flash the phone with the same firmware version like it originally had or higher one.



Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

[mdshad1]

Originally Posted by Mr.Tinkertrain

@ mdshad1,

What firmware version your handset originally had?
To be able to revive it, flash the phone with the same firmware version like it originally had or higher one.



Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

hello,

i think firmware was Firmware R252211LD_U_85.97.F11P as u can see in my smartmoto logo anyway can you please tell me what high version i should use and only flash will solve my problem or i also use pds repair option

thanksssss

[Mr.Tinkertrain]

@ mdshad1,

Flash the phone with R252211LD_U_85.97.F11P and after that run unlock procedure for this phone model.



Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com