flashed e550 with sc 2.22 now screen white - GSM-Forum

rampe · 01-25-2006, 02:48

I flashed E550 with smart moto 1.14 and sc now phone starts with white screeen and hangs .. it is not recognised at all by pc osb port or sc port. I tried the repair cable but still no joy...

Amir-SkillZ · 01-25-2006, 08:13

OK If u Just CHeck that If ur Mobile Get into Flash Mode by * # poweron...
Now connect it With Smartmoto and Restore its Orignal Security Area....
If not then Complete PDS Repair and Full Flash......

blaiseid · 01-25-2006, 08:31

Sec area will Restore the phone normal booting.
Just connect in boot mode and restore sec area under Backup tab.

rampe · 01-25-2006, 08:44

I connect ccable then the battery and immediately phone screen goes white my usb pc port donot recognise it if I use sc usb port still notting , phone cannot be found

rampe · 01-25-2006, 10:07

Quote:

Originally Posted by Amir-SkillZ

OK If u Just CHeck that If ur Mobile Get into Flash Mode by * # poweron...
Now connect it With Smartmoto and Restore its Orignal Security Area....
If not then Complete PDS Repair and Full Flash......

I finally got the flash interface but now smoto hangs . I don't understand I also used the usb port on my pc that is how I got the interface. But Why when I search for phone smartmoto hangs never finds the interface? I also try RSD lite but still nothing happens no phone found ?... STRANGE

I flashed maybe 100 pcs v300/v620/550/400 already before I upgraded to smart moto 1.14 ...not sure if it has a bug with new nersion ??

GSM_Support · 01-25-2006, 10:17

What exacly happenes to SmartMoto. Please provide more details.

Best Regards
Smart-Clip Team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

rampe · 01-25-2006, 10:30

Quote:

Originally Posted by SC_SUPPORT

What exacly happenes to SmartMoto. Please provide more details.
Best Regards
Smart-Clip Team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

Ok
1st start smartmoto , programs starts I click find smartclip and in 1-2 sec smartclip if found.
2nd. I then go to pc-flash I click the file I want to load on the phone it is a v620 file got it at motomodders.( used it before work fine)
3rd. The program loads file it takes 5 secs then I click on the top right hand side and I selected computer usb port. But I donot hit search yet.
4th. I connect my phone into usb pc port. Smartmoto all funtions hangs I cannot click anything when I move my cursor over the smartmoto prog it shows the sand clock icon means prog is busy ....after 30 secs top say smarmoto 1.14 not responding

GSM_Support · 01-25-2006, 10:42

Please make sure that P2K deriver is installed properly.

Quote:

Universal driver for all P2K models is available within SmartMoto directory ( SmartMoto install folder \drivers\p2k.sys). To install the driver: connect your handset to the PC, system will detect a new device, locate the driver and run the installation as many times as system will require it.

Start SmartMoto, connect your handset, select PC USB port, press search & after that select your flash file.
Do not search for Smart-Clip.

Best Regards
Smart-Clip Team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

rampe · 01-25-2006, 17:57

Quote:

Originally Posted by SC_SUPPORT

Please make sure that P2K deriver is installed properly.
Start SmartMoto, connect your handset, select PC USB port, press search & after that select your flash file.
Do not search for Smart-Clip.
Best Regards
Smart-Clip Team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

The drivers are ok because I put a V3 in flash mode and then attached the cable to usb port and smart moto found it easily . however with the v3 still connected I attached the e550 and smartmoto automatically became busy and was not responding...When I checked the device manager I saw motorola flash interface. So it is there .. But why smart moto not seeing it? but it saw the V3 ??

I tried using the usb repair cable but same thing happens smart moto does not see it in device manager and it does not respond to anything as soon as I attach that phone ... If I remove the phone the program starts back working.. Take into consideration that smart moto becomes unstable with out me even pressing search for phone. I mean it gets unstable as soon as I actually plug the usb cable in the port with the phone attached offcourse.

VERY STRANGE ???

anymore suggestions
regards

rampe · 01-25-2006, 22:02

Yes ??? Hello smartclip team

rampe · 01-27-2006, 01:08

Quote:

Originally Posted by SC_SUPPORT

Please make sure that P2K deriver is installed properly.
Start SmartMoto, connect your handset, select PC USB port, press search & after that select your flash file.
Do not search for Smart-Clip.
Best Regards
Smart-Clip Team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

First of all MAKE sure the battery is fully charge.
Next put phone in flash mode manually( I used battery pluged in to get it there)
Next connect it to smart clip and turn on smart moto .
Goto Repair PDS for E550 ..and enable the flash after tab..
and Bingo it works great !!!!...

I finally fixed my phone.. I made a mistake first and flashed it with v3 flash..I know stupid..

regards

01-25-2006, 02:48	#1 (permalink)
rampe Freak Poster Join Date: Mar 2005 Age: 44 Posts: 195 Member: 129016 Status: Offline Thanks Meter: 6	How to fix ? e550 with white screen after flashed with Smarto moto 1.14 I flashed E550 with smart moto 1.14 and sc now phone starts with white screeen and hangs .. it is not recognised at all by pc osb port or sc port. I tried the repair cable but still no joy... Last edited by rampe; 01-27-2006 at 01:14.

01-25-2006, 08:44	#4 (permalink)
rampe Freak Poster Join Date: Mar 2005 Age: 44 Posts: 195 Member: 129016 Status: Offline Thanks Meter: 6	My friends the phone does not go to flash mode I connect ccable then the battery and immediately phone screen goes white my usb pc port donot recognise it if I use sc usb port still notting , phone cannot be found

01-25-2006, 22:02	#10 (permalink)
rampe Freak Poster Join Date: Mar 2005 Age: 44 Posts: 195 Member: 129016 Status: Offline Thanks Meter: 6	Any help ???? Yes ??? Hello smartclip team

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
W600i Replaced LCD Now Screen White	hishep	Sony Ericsson Hardware Repair	0	01-12-2007 18:21
how to flash v3x with sc???	nafg	Smart-Clip	1	04-27-2006 16:50
Try to flash L7 with SC but Failed	danielkhaw	Smart-Clip	7	04-03-2006 19:56

01-25-2006, 08:13	#2 (permalink)
Amir-SkillZ No Life Poster Join Date: Nov 2004 Location: Capetown Posts: 6,709 Member: 91045 Status: Offline Thanks Meter: 8,696	OK If u Just CHeck that If ur Mobile Get into Flash Mode by * # poweron... Now connect it With Smartmoto and Restore its Orignal Security Area.... If not then Complete PDS Repair and Full Flash......

01-25-2006, 08:31	#3 (permalink)
blaiseid No Life Poster Join Date: Aug 2003 Location: Town City Age: 54 Posts: 3,485 Member: 37735 Status: Offline Sonork: 100.103255 Thanks Meter: 205	Sec area will Restore the phone normal booting. Just connect in boot mode and restore sec area under Backup tab.

01-25-2006, 10:17	#6 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	What exacly happenes to SmartMoto. Please provide more details. Best Regards Smart-Clip Team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com