FOMA M702iG SUCCESSFULLY REVIVE BOOTMODE AND UNLOCK.... - GSM-Forum

clearcom · 10-13-2007, 11:08

WE SUCCESSFULLY REVIVE BOOTMODE m702ig AND UNLOCK THIS PHONE VIA SMART CLIP....

HISTORY; WE ACCEPT THIS PHONE IN BOOTMODE already.
ACTION TAKEN; FLASH THE PHONE AND REVIVE to normal (we spend lots of time to research and study before return to normal mode

after successfull revive, we unlock the phone.

MABUHAY ANG PILIPINAS!!!

-ALONG AND CORTS

tkhs1157 · 10-13-2007, 11:20

＠clearcom
please let me know the manufacture years and firmware version of M702iG which succeeded in UNLOCK.

I also tried several UNLOCK of M702iG.
The product made from December 2006 is O.K.
The product made from April and October 2007 is NG.

raezak · 10-13-2007, 11:22

good work kababayan

br

clearcom · 10-13-2007, 11:29

Quote:

Originally Posted by raezak

good work kababayan

br

THANKS KABAYAN!!!

MORE POWER!!!

clearcom · 10-13-2007, 11:56

Quote:

Originally Posted by tkhs1157

＠clearcom
please let me know the manufacture years and firmware version of M702iG which succeeded in UNLOCK.

I also tried several UNLOCK of M702iG.
The product made from December 2006 is O.K.
The product made from April and October 2007 is NG.

DEC. 2006............
......................

tkhs1157 · 10-13-2007, 13:31

Thank you
Since V2000_U_90.21.0C.B2I cannot UNLOCK, cautions are required.

aesculanus · 10-26-2007, 19:54

great on sim unlock, but what about branding? i have unlocked m702ig, but docomo firmware doesn't allow wap/mms settings. i can't even change the ringtone to my own mp4! how do we fix that?

vertz · 10-27-2007, 16:21

Quote:

Originally Posted by tkhs1157

Thank you
Since V2000_U_90.21.0C.B2I cannot UNLOCK, cautions are required.

look here mate, now it can be done... here's the log

SmartMoto 2.42
S-Card: xxxxxxxx Smart-Clip dongle, v 1.50, assigned Smart-Clip: xxxxxxxx Europe, initializing... OK
Clip serial: xxxxxxxx, version: 3.25, initializing... OK
Searching for phone... found FOMA M702iG, getting test interface... OK
Model M702iG
Firmware V2000_U_90.21.0C.B2I
Switching to flash mode... OK [S Flash Argon]
Reading phone boot version... 3.03
Stored temporary backup to C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_1CA30D0E44B65850.bk_
Processing data, 6 of 6 block...OK
Searching for phone... found FOMA M702iG, getting test interface... OK
Switching to flash mode... OK [S Flash Argon]
Reading phone boot version... 3.03
Sending boot... OK
Erasing flash memory OK
Sending firmware OK
Searching for phone... found S Flash Argon
Switching to flash mode... OK
Searching for phone... no phone found
Searching for phone... found S Flash Argon
Switching to flash mode... OK
Reading phone boot version... 0.00
io timeout
Boot version 0x000 is not supported for model 'M702iG'
Boot version 0x000 is not supported for model 'M702iG'
Searching for phone... found S Flash Argon, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 3.03
Sending boot... OK
Processing data, 6 of 6 block...OK
Erasing flash memory OK
Sending firmware OK
Searching for phone... found S Flash Argon
Switching to flash mode... OK
Reading phone boot version... 0.00
Reading flash id... Intel - 28F256L18B
Reading flash id/2... Intel - 28F256L18T, OK
Phone group: K3,M702iG,V1100,V3xx,V6
Hardware IMEI: 35918200141xxx
IMEI OTP status: locked
Security area saved to "PDS for S Flash Argon 35918200141xxx.mbk"
Performing restore from temparary backup file C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_1CA30D0E44B65850.bk_
Restore OK
Unlocking phone... OK

Invisible · 10-27-2007, 18:08

I also had one of that hp nx9010 laptops,
nice

best regards
Invisible

bonsaiiii · 11-06-2007, 13:17

WE SUCCESSFULLY REVIVE BOOTMODE m702ig AND UNLOCK THIS PHONE VIA SMART CLIP....

HISTORY; WE ACCEPT THIS PHONE IN BOOTMODE already.
ACTION TAKEN; FLASH THE PHONE AND REVIVE to normal (we spend lots of time to research and study before return to normal mode after successfull revive, we unlock the phone.

MABUHAY ANG PILIPINAS!!!

could you share the flash file please? Today I unlock the same phone but stuck in bootloader mode.
Please...

Mr.Tinkertrain · 11-06-2007, 13:24

@ bonsaiiii,

Flash files for this phone model can be found at boot-loader.com in PCF and MFW file sections.
To be able to flash this handset with *.mfw flsah file, Prepare Smart TestPoint cable should be used and "unlock automatically" should be marked off.
*.pcf files can be used by SCout flasher. Please check www.scoutdongle.com for more detailed information regarding SCout flasher.

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

nishaon · 11-06-2007, 19:40

Thats really great support from the Smart-Clip team

thuanloivtnt · 11-07-2007, 11:01

I have problem Unlock M702iG load error

log here

SmartMoto 2.42
S-Card:............ Smart-Clip dongle, v 1.50, assigned Smart-Clip:.......... Europe, initializing... OK
Clip serial:............, version: 3.25, initializing... OK
Searching for phone... found S Flash Argon, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 3.03
Sending boot... OK
Processing data, 6 of 6 block...OK
Erasing flash memory OK
Sending firmware OK
Searching for phone... found S Flash Argon
Switching to flash mode... OK
Reading phone boot version... 0.00
load error

pls help me. Thanks Advance

Mr.Tinkertrain · 11-07-2007, 11:10

@ thuanloivtnt,

Please tell us what cable you are using?
Where have you purchased it?
During Smart TP procedure, TestPoint should be hold until SmartMoto informs you to disconnect it.

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

kenny81 · 11-09-2007, 06:43

@ Mr.Tinkertrain
-I need driver S Flash Argon for flashing FOMA M702iG by Scout!
-I using cable Test Point of EM5 Company - China.
-But when unlocking M702iG still load error. I use only Primary Test Point A it is ok (I tested) but when i use both Test point A and B it not ok
LOG HERE

Quote:

SmartMoto 2.42
S-Card:............ Smart-Clip dongle, v 1.50, assigned Smart-Clip:.......... Europe, initializing... OK
Clip serial:............, version: 3.25, initializing... OK
Searching for phone... found S Flash Argon, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 3.03
Sending boot... OK
Processing data, 6 of 6 block...OK
Erasing flash memory OK
Sending firmware OK
Searching for phone... found S Flash Argon
Switching to flash mode... OK
Reading phone boot version... 0.00
load error

Pls help me! thanks advance

10-13-2007, 11:08	#1 (permalink)
clearcom Freak Poster Join Date: Feb 2005 Location: hk, phils.,shenzhen Posts: 403 Member: 120669 Status: Offline Thanks Meter: 15	FOMA M702iG SUCCESSFULLY REVIVE BOOTMODE AND UNLOCK.... WE SUCCESSFULLY REVIVE BOOTMODE m702ig AND UNLOCK THIS PHONE VIA SMART CLIP.... HISTORY; WE ACCEPT THIS PHONE IN BOOTMODE already. ACTION TAKEN; FLASH THE PHONE AND REVIVE to normal (we spend lots of time to research and study before return to normal mode after successfull revive, we unlock the phone. MABUHAY ANG PILIPINAS!!! -ALONG AND CORTS

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Foma m702ig successfully unlock	Qaisar Mahmood	Smart-Clip	2	09-27-2009 10:10
>>> Successfully repaired RPL and unlocked 6630 <<<<	mujahid_ali	BB5KING for (BB5BOX)	5	11-11-2008 22:50
unlock foma M702iG Success ............	.::LUQMAN::.	Smart-Clip	10	09-17-2008 15:13
foma m702iG successfully	sammy75	Smart-Clip	3	10-23-2007 07:16
FOMA M702iG Successfully Unlocked	G i l l a n i	Smart-Clip	1	10-22-2007 07:36

10-13-2007, 11:20	#2 (permalink)
tkhs1157 Freak Poster Join Date: Jan 2006 Posts: 152 Member: 226222 Status: Offline Thanks Meter: 2	＠clearcom please let me know the manufacture years and firmware version of M702iG which succeeded in UNLOCK. I also tried several UNLOCK of M702iG. The product made from December 2006 is O.K. The product made from April and October 2007 is NG.

10-13-2007, 11:22	#3 (permalink)
raezak No Life Poster Join Date: Apr 2006 Location: Badong's Junkshop Posts: 2,749 Member: 260632 Status: Offline Thanks Meter: 639	good work kababayan br

10-13-2007, 13:31	#6 (permalink)
tkhs1157 Freak Poster Join Date: Jan 2006 Posts: 152 Member: 226222 Status: Offline Thanks Meter: 2	Thank you Since V2000_U_90.21.0C.B2I cannot UNLOCK, cautions are required.

10-26-2007, 19:54	#7 (permalink)
aesculanus Junior Member Join Date: Jul 2007 Posts: 3 Member: 556130 Status: Offline Thanks Meter: 0	great on sim unlock, but what about branding? i have unlocked m702ig, but docomo firmware doesn't allow wap/mms settings. i can't even change the ringtone to my own mp4! how do we fix that?

10-27-2007, 18:08	#9 (permalink)
Invisible No Life Poster Join Date: Apr 2001 Location: รำมว&# Posts: 2,461 Member: 3956 Status: Offline Sonork: galletto3 rules :D Thanks Meter: 55	I also had one of that hp nx9010 laptops, nice best regards Invisible

11-06-2007, 13:17	#10 (permalink)
bonsaiiii Junior Member Join Date: Aug 2004 Age: 48 Posts: 23 Member: 76770 Status: Offline Thanks Meter: 0	WE SUCCESSFULLY REVIVE BOOTMODE m702ig AND UNLOCK THIS PHONE VIA SMART CLIP.... HISTORY; WE ACCEPT THIS PHONE IN BOOTMODE already. ACTION TAKEN; FLASH THE PHONE AND REVIVE to normal (we spend lots of time to research and study before return to normal mode after successfull revive, we unlock the phone. MABUHAY ANG PILIPINAS!!! could you share the flash file please? Today I unlock the same phone but stuck in bootloader mode. Please...

11-06-2007, 13:24	#11 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ bonsaiiii, Flash files for this phone model can be found at boot-loader.com in PCF and MFW file sections. To be able to flash this handset with .mfw flsah file, Prepare Smart TestPoint cable should be used and "unlock automatically" should be marked off. .pcf files can be used by SCout flasher. Please check www.scoutdongle.com for more detailed information regarding SCout flasher. Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

11-06-2007, 19:40	#12 (permalink)
nishaon No Life Poster Join Date: Jan 2006 Location: Deep Blue G.S.M. Posts: 2,369 Member: 225229 Status: Offline Thanks Meter: 90	Thats really great support from the Smart-Clip team

11-07-2007, 11:01	#13 (permalink)
thuanloivtnt Crazy Poster Join Date: Aug 2005 Location: Viet Nam Age: 51 Posts: 51 Member: 174886 Status: Offline Thanks Meter: 0	I have problem Unlock M702iG load error log here SmartMoto 2.42 S-Card:............ Smart-Clip dongle, v 1.50, assigned Smart-Clip:.......... Europe, initializing... OK Clip serial:............, version: 3.25, initializing... OK Searching for phone... found S Flash Argon, getting test interface... interface not found Switching to flash mode... OK Reading phone boot version... 3.03 Sending boot... OK Processing data, 6 of 6 block...OK Erasing flash memory OK Sending firmware OK Searching for phone... found S Flash Argon Switching to flash mode... OK Reading phone boot version... 0.00 load error pls help me. Thanks Advance

11-07-2007, 11:10	#14 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ thuanloivtnt, Please tell us what cable you are using? Where have you purchased it? During Smart TP procedure, TestPoint should be hold until SmartMoto informs you to disconnect it. Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com