foma unlock failed...help - GSM-Forum

sammy75 · 10-07-2007, 15:55

help me... i have this problem, every send boot.... 46 % stop
look picture

kashi4gul · 10-07-2007, 18:17

I m just looking this how to done
46% ........... ?

I think this foma is not supported with Smart-Clip ...
Mr Tinkertrain where u r ..........
plz assist here .....

B.R.,
kashi4gul

ch_rathore · 10-08-2007, 07:00

Quote:

Originally Posted by sammy75

help me... i have this problem, every send boot.... 46 % stop
look picture

same problem here phone is no normal mode on

mcandre · 10-08-2007, 10:09

1) Сheck the output of Smart-Clip power source. For stable Smart-Clip functions minimum output is 9V & 500mA. Recommended power supply is 12V & 750mA

2) Ensure that LCD is disconnected from the board!

3) Disconnect Smart Tespoint only when the program prompt you to do that!

sammy75 · 10-08-2007, 14:49

i have 12v & 1200mA can they do that ?? are they same like 12V & 750mA ?

Mr.Tinkertrain · 10-08-2007, 15:02

@ sammy75,

1200mA will be a little bit high value. We recommend to 12V 750mA.

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

nishaon · 10-08-2007, 23:56

What about FOMA 702iS unlock?

Is it supported?

Mr.Tinkertrain · 10-09-2007, 07:59

@ nishaon,

Check your PM, please.

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

sammy75 · 10-09-2007, 09:52

Quote:

Originally Posted by Mr.Tinkertrain

@ sammy75,

1200mA will be a little bit high value. We recommend to 12V 750mA.

boss... 750mA i cant found in market, all said 1000-1200 are same like 750mA
any solution to find out.. that adaptor ?? maybe from other electronics ??

i have try with 12V-1200mA & 9v-1200mA, all connected ok...but Tp always wrong... see picture

Mr.Tinkertrain · 10-09-2007, 09:59

@ sammy75,

One of possible resons for such error could be faulty cable.
What cable are you using?
Where did you buy your cable?

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

sammy75 · 10-10-2007, 08:26

Quote:

Originally Posted by Mr.Tinkertrain

@ sammy75,

One of possible resons for such error could be faulty cable.
What cable are you using?
Where did you buy your cable?

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

i bought from ipmart.com coz they talk THIS IS ORIGINAL CABLE

Mr.Tinkertrain · 10-10-2007, 08:36

@ sammy75,

Please be aware that Smart TestPoint cable made by GSM server team is the only fully tested and fully functional solution. We can not guaranty stable functions of Smart-Clip with the cables from other manufacturers. GSMserver team doesn’t bear any responsibility for the faults caused by cables from other manufacturers.

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

sammy75 · 10-10-2007, 09:05

ohhh... where i can buy it ??

Mr.Tinkertrain · 10-10-2007, 09:57

@ sammy75,

Original cable can be bought from the www.gsmserver.com

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

.::Indian::. · 10-27-2007, 11:56

I have foma 702is for unlock.any solutions?

10-09-2007, 09:59	#10 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ sammy75, One of possible resons for such error could be faulty cable. What cable are you using? Where did you buy your cable? Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com Last edited by GSM_Support; 10-09-2007 at 10:18.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nokia 6300 Unlock failed , help help......	Mobile_plus	JAF No Tp Unlocker by Cinek	1	05-05-2009 21:00
Nokia 6300 Unlock failed , help help......	Mobile_plus	Nokia Base Band 5 ( BB-5 )	1	05-04-2009 19:13
N73 unlock failed help griffin team	genciletisim	MT-BOX	2	07-25-2007 19:16
= PATCH UNLOCK - FAILED = help pls	ARBI	MT-BOX	2	02-12-2007 19:21
LG 8120 Unlock Failed!!!! Help	tittu	LG 3G (USB-Smart)	10	02-19-2006 14:38

10-07-2007, 18:17	#2 (permalink)
kashi4gul Product Supporter Join Date: Mar 2007 Location: GSD Pro (Dongle) Age: 38 Posts: 4,601 Member: 460762 Status: Offline Sonork: 100.1592082 Thanks Meter: 3,104	I m just looking this how to done 46% ........... ? I think this foma is not supported with Smart-Clip ... Mr Tinkertrain where u r .......... plz assist here ..... B.R., kashi4gul

10-08-2007, 10:09	#4 (permalink)
mcandre No Life Poster Join Date: Mar 2006 Location: Central Europe Age: 39 Posts: 11,877 Member: 239548 Status: Offline Thanks Meter: 2,781	1) Сheck the output of Smart-Clip power source. For stable Smart-Clip functions minimum output is 9V & 500mA. Recommended power supply is 12V & 750mA 2) Ensure that LCD is disconnected from the board! 3) Disconnect Smart Tespoint only when the program prompt you to do that!

10-08-2007, 14:49	#5 (permalink)
sammy75 Banned Join Date: Apr 2007 Posts: 486 Member: 480351 Status: Offline Thanks Meter: 5	i have 12v & 1200mA can they do that ?? are they same like 12V & 750mA ?

10-08-2007, 15:02	#6 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ sammy75, 1200mA will be a little bit high value. We recommend to 12V 750mA. Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

10-08-2007, 23:56	#7 (permalink)
nishaon No Life Poster Join Date: Jan 2006 Location: Deep Blue G.S.M. Posts: 2,369 Member: 225229 Status: Offline Thanks Meter: 90	What about FOMA 702iS unlock? Is it supported?

10-09-2007, 07:59	#8 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ nishaon, Check your PM, please. Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

10-10-2007, 08:36	#12 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ sammy75, Please be aware that Smart TestPoint cable made by GSM server team is the only fully tested and fully functional solution. We can not guaranty stable functions of Smart-Clip with the cables from other manufacturers. GSMserver team doesn’t bear any responsibility for the faults caused by cables from other manufacturers. Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

10-10-2007, 09:05	#13 (permalink)
sammy75 Banned Join Date: Apr 2007 Posts: 486 Member: 480351 Status: Offline Thanks Meter: 5	ohhh... where i can buy it ??

10-10-2007, 09:57	#14 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ sammy75, Original cable can be bought from the www.gsmserver.com Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

10-27-2007, 11:56	#15 (permalink)
.::Indian::. No Life Poster Join Date: Aug 2003 Location: Kerala Posts: 941 Member: 37015 Status: Offline Thanks Meter: 67	I have foma 702is for unlock.any solutions?