K1 shows up Boot Loader screen when insert battrey or power up... - GSM-Forum

Burnt Cobba · 03-24-2007, 15:54

hi mates.

got this problem on a K1. Tried to unlock which all went ok, tried repair PDS and FULL flash with the exact version. Still remained the same.

Occassionally it will power up normally but very rarely.

thanks for any help

Stylo_GSM · 03-24-2007, 18:06

Hmm,

See if on support if there are upper version flash files then the current one on the phone.

Also what was the boot and firmware version. Pls post so Sc Team can help u better.

Burnt Cobba · 03-25-2007, 18:47

dont think it is a firmware version problem.

the boot loader is 0A.B2

SW Version : R4527_G_08.12.10R_B

unlocking, flashing , PDS repair all ok.Even when battrey is removed and inserted this screen shows up. Occasionally it will power up normally. BUT very rarely.

thanks

Mr.Tinkertrain · 03-26-2007, 11:32

@ Burnt Cobba,

try to make Repair PDS and fell flash it with higher firmware version.

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

Burnt Cobba · 03-26-2007, 13:55

ok will try it up then mate

one thing to point out for those who read this thread.... the phone was already in this state before unlocked .... so smart clip has nothing to do with this problem.

blaiseid · 03-26-2007, 14:27

Quote:

Originally Posted by Burnt Cobba

ok will try it up then mate

one thing to point out for those who read this thread.... the phone was already in this state before unlocked .... so smart clip has nothing to do with this problem.

Try to gently heat the micron chip or any flash chip, might be two. and test. Got the same problem in c975, but solved by heating it. now customer never come back.

Burnt Cobba · 03-26-2007, 14:43

cheers mate. I suspected some hardware fault

this unit was bought off ebay. When client got it he thought it did so becuase it was not unlocked as seller told him. Gonna inform him and then he does what he wants.

thanks for the hint mate

yuval44 · 04-03-2007, 16:55

try pds and full flash new version

Medved · 04-03-2007, 21:52

I think it's hardware problem. May be You damage some elements on PSB when open sheeld. Or You use easy TP?

03-24-2007, 15:54	#1 (permalink)
Burnt Cobba No Life Poster Join Date: Apr 2002 Location: The Green Mile Posts: 3,653 Member: 11325 Status: Offline Thanks Meter: 266	K1 shows up Boot Loader screen when insert battrey or power up... hi mates. got this problem on a K1. Tried to unlock which all went ok, tried repair PDS and FULL flash with the exact version. Still remained the same. Occassionally it will power up normally but very rarely. thanks for any help

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
L7 shows boot loader screen directly	neilthirumuttam	Motorola P2k	20	09-15-2009 01:19
l7 boot loader appear when inserting battery.	dj nike	Smart-Clip	9	05-07-2009 07:42
unlock L6 showing boot-loader screen	kalmehcraig	Motorola P2k	4	07-16-2007 19:23
V3 goes to BOOT loader screen.. wont boot up	tomandnic	Motorola Hardware Repair	2	06-09-2007 21:28
8310 powers up when inserted battrey	Burnt Cobba	Nokia Hardware & Hardware Repair	9	07-06-2003 14:08

03-24-2007, 18:06	#2 (permalink)
Stylo_GSM No Life Poster Join Date: Sep 2005 Location: UK, London Age: 35 Posts: 2,236 Member: 177235 Status: Offline Sonork: 111568 Thanks Meter: 138	Hmm, See if on support if there are upper version flash files then the current one on the phone. Also what was the boot and firmware version. Pls post so Sc Team can help u better.

03-25-2007, 18:47	#3 (permalink)
Burnt Cobba No Life Poster Join Date: Apr 2002 Location: The Green Mile Posts: 3,653 Member: 11325 Status: Offline Thanks Meter: 266	dont think it is a firmware version problem. the boot loader is 0A.B2 SW Version : R4527_G_08.12.10R_B unlocking, flashing , PDS repair all ok.Even when battrey is removed and inserted this screen shows up. Occasionally it will power up normally. BUT very rarely. thanks

03-26-2007, 11:32	#4 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ Burnt Cobba, try to make Repair PDS and fell flash it with higher firmware version. Best Regards Smart-clip team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

03-26-2007, 13:55	#5 (permalink)
Burnt Cobba No Life Poster Join Date: Apr 2002 Location: The Green Mile Posts: 3,653 Member: 11325 Status: Offline Thanks Meter: 266	ok will try it up then mate one thing to point out for those who read this thread.... the phone was already in this state before unlocked .... so smart clip has nothing to do with this problem.

03-26-2007, 14:43	#7 (permalink)
Burnt Cobba No Life Poster Join Date: Apr 2002 Location: The Green Mile Posts: 3,653 Member: 11325 Status: Offline Thanks Meter: 266	cheers mate. I suspected some hardware fault this unit was bought off ebay. When client got it he thought it did so becuase it was not unlocked as seller told him. Gonna inform him and then he does what he wants. thanks for the hint mate

04-03-2007, 16:55	#8 (permalink)
yuval44 Freak Poster Join Date: Feb 2005 Location: israel Age: 48 Posts: 422 Member: 116078 Status: Offline Thanks Meter: 17	try pds and full flash new version

04-03-2007, 21:52	#9 (permalink)
Medved Freak Poster Join Date: Feb 2005 Location: Ukraine Age: 43 Posts: 285 Member: 117914 Status: Offline Thanks Meter: 96	I think it's hardware problem. May be You damage some elements on PSB when open sheeld. Or You use easy TP?