k1 unlock problem - GSM-Forum

zubair_uk2003 · 12-06-2006, 22:39

right im having problems unlocking the k1, rather than go into "s blank SmartMoto 2.00
Dongle: 2xxxxxxxx Smart-Clip dongle, v 1.00, assigned clip: 60xxxxxxx Europe, OK
Clip serial: 6xxxxxxxx, version: 3.00, initializing... OK
Searching for phone... found Motorola Phone (K1), getting test interface... OK
Model K1
Firmware R4527_G_08.22.07R
Switching to flash mode... reconnect error
Check if the phone battery charge is OK

im using the testpoint box fully charged, i also tried with the nokia charger connected. what am i doing wrong? digits changed for security purposes.

i got it this time but only with the fone battery connected. left the tp box out of it. now im getting this message.
SmartMoto 2.00
Dongle: 2xxxxxxxx Smart-Clip dongle, v 1.00, assigned clip: 6xxxxxxxx Europe, OK
Clip serial: 6xxxxxxxx, version: 3.00, initializing... OK
Searching for phone... found Motorola Phone (K1), getting test interface... OK
Model K1
Firmware R4527_G_08.22.07R
Switching to flash mode... OK [S Flash Neptune LTE2]
Reading phone boot version... A.B2
io timeout

regards

eko · 12-06-2006, 22:45

Tp problem..............

ratrading · 12-30-2006, 19:41

Try connecting the testpoint first and then the battery to the phone, then open up Smartmoto and press search.

gwaai · 12-30-2006, 21:36

if ur TP is correctly performed, u will find BLANK LTE2 phone instead of K1

ikrash · 12-30-2006, 22:35

bro ....i think the problem of ur timeing to put ur tp,when u pick the tp at the right time it will work normally.....its my own idea coz i also have faced such problem......ok...............ikrash

emwugsm · 12-31-2006, 00:59

Just use an external power supply in stead of battery.

1. Connect TP to the ground
2. Switch power On in the power-supply
3. Press [Search] in Smart-Moto.

Here is a scheme of a simple power-supply adaptor from USB port:

alvin101 · 12-31-2006, 00:59

I had the same problem. If your using the fun fone shop testpoint box take the aligator clamp what is meant for extra ground and connect it to the ground.

12-06-2006, 22:39	#1 (permalink)
zubair_uk2003 Crazy Poster Join Date: Sep 2004 Posts: 50 Member: 81133 Status: Offline Thanks Meter: 0	k1 unlock problem right im having problems unlocking the k1, rather than go into "s blank SmartMoto 2.00 Dongle: 2xxxxxxxx Smart-Clip dongle, v 1.00, assigned clip: 60xxxxxxx Europe, OK Clip serial: 6xxxxxxxx, version: 3.00, initializing... OK Searching for phone... found Motorola Phone (K1), getting test interface... OK Model K1 Firmware R4527_G_08.22.07R Switching to flash mode... reconnect error Check if the phone battery charge is OK im using the testpoint box fully charged, i also tried with the nokia charger connected. what am i doing wrong? digits changed for security purposes. i got it this time but only with the fone battery connected. left the tp box out of it. now im getting this message. SmartMoto 2.00 Dongle: 2xxxxxxxx Smart-Clip dongle, v 1.00, assigned clip: 6xxxxxxxx Europe, OK Clip serial: 6xxxxxxxx, version: 3.00, initializing... OK Searching for phone... found Motorola Phone (K1), getting test interface... OK Model K1 Firmware R4527_G_08.22.07R Switching to flash mode... OK [S Flash Neptune LTE2] Reading phone boot version... A.B2 io timeout regards Last edited by zubair_uk2003; 12-06-2006 at 23:09.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
k1 unlock problem	nadirghazi	Smart-Clip	3	08-08-2008 12:07
K1 Unlocking Problem !!!	albarka network	Smart-Clip	1	02-23-2008 11:24
Problem K1 Unlocking	ian20essex	Ultima Box Light	2	01-02-2008 14:19
k1/s unlocking problem	sukhdeep	Smart-Clip	1	01-02-2008 10:14
moto k1 unlocking problem	legendmani	Motorola Hardware Repair	2	04-26-2007 08:41

12-06-2006, 22:45	#2 (permalink)
eko No Life Poster Join Date: May 2003 Posts: 1,323 Member: 30098 Status: Offline Thanks Meter: 29	Tp problem..............

12-30-2006, 19:41	#3 (permalink)
ratrading Freak Poster Join Date: Oct 2005 Posts: 105 Member: 194595 Status: Offline Thanks Meter: 5	Try connecting the testpoint first and then the battery to the phone, then open up Smartmoto and press search.

12-30-2006, 21:36	#4 (permalink)
gwaai No Life Poster Join Date: Jan 2004 Age: 45 Posts: 1,362 Member: 49581 Status: Offline Thanks Meter: 73	if ur TP is correctly performed, u will find BLANK LTE2 phone instead of K1

12-30-2006, 22:35	#5 (permalink)
ikrash No Life Poster Join Date: Sep 2006 Location: SPAIN Posts: 538 Member: 352041 Status: Offline Thanks Meter: 52	bro ....i think the problem of ur timeing to put ur tp,when u pick the tp at the right time it will work normally.....its my own idea coz i also have faced such problem......ok...............ikrash

12-31-2006, 00:59	#7 (permalink)
alvin101 Freak Poster Join Date: Apr 2006 Location: the Bahamas Age: 33 Posts: 292 Member: 264055 Status: Offline Thanks Meter: 6	I had the same problem. If your using the fun fone shop testpoint box take the aligator clamp what is meant for extra ground and connect it to the ground.