Moto V3v Boot 8.26
 

@dear friends

LATEST MOTO V3V BOOT VERSION 8.26 DO NOT NEED NE TP

HERE THE METHOD

1=TURN ON THE PHONE
2=READ INFO IN SMART MOTO
3=SELECT V3 8.26 MAKE REMOVE RSA
4=AFTER MAKING REMOVE RSA COMPLETE
5=SIMPLE ONE TOUCH UNLOCK BY SMART-CLIP

ENJOY

yes u can do
but via test point

Dear Friends

Can Some One Post The Secure Procedure To Unlock

u have to do like v3
test point same of v3
u have cut the shield and chose model v3
unlock it

@dear friends

LATEST MOTO V3V BOOT VERSION 8.26 DO NOT NEED NE TP

HERE THE METHOD

1=TURN ON THE PHONE
2=READ INFO IN SMART MOTO
3=SELECT V3 8.26 MAKE REMOVE RSA
4=AFTER MAKING REMOVE RSA COMPLETE
5=SIMPLE ONE TOUCH UNLOCK BY SMART-CLIP

ENJOY

thanks for your solution bro

post resuolt de amo...

You can unlock it via testpoint:
http://smart-clip.com/support.php#Ge..._via_TestPoint

Log to 'Unlock' bookmark.

WBR

u can unlock with testpoint just like v3i or v3r 1st u open the phone remoove shield and check the resistence of testpoint u will b find this is v3i or v3r and do unlock via testpoint.. good luck

@mcandre & makkah mobile

first of all thanks to u both and secondly i have already unlocked my v3v

and i have also posted the method how to make it

there is no use of tp method for v3v

thanks

confirmed no need tp if use tp always io timeout just unlock same procedure v3 with boot 8.26

SmartMoto 2.22
S-Card: 0000000 Smart-Clip dongle, v 1.17, assigned Smart-Clip: 0000000000Europe, initializing... OK
Clip serial: 00000000, version: 3.16, initializing... OK
Searching for phone... no phone found
Searching for phone... found S Blank Neptune LTE, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version...
io timeout
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... found S Blank Neptune LTE, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version...
io timeout
Clip serial: 00000000, version: 3.16, initializing... OK
Searching for phone... no phone found
Searching for phone... found Motorola Phone (V3v), getting test interface... OK
Model V3v
Firmware R374_G_0E.42.08R
Switching to flash mode... OK [S Flash Neptune LTE]
Reading phone boot version... 8.26
Sending boot... OK
Writing flash... OK
"Remove RSA" performed successfully, you may service and unlock the phone as usual

Hi

Thanks chiragp it works

Please smat-clip team this soluton is 100% working i tested for my self....not need to open phone and no testpoints need it.

thanks for your solution bro