Motorola V360 Soluion

[kava]

Dear Friends,

My Name is Nischal and I have seen many people having difficulty unlocking Motorola V360, I also found it difficulty in unlocking it, and also I’m posting the picture of the Mobile phones I unlocked, there was a total of 11 phones which out of that I only have three left so I want to help others;

1) Please be very careful when removing the Shield, coz it is very risky, I have killed one phone just by taking out the Shield
2) Connect the SC to LPT and also the cable
3) Connect the cable to phone and also to the SC
4) Now connect the battery (Picture 1) and the light will light up (you will need some ones help in next steps)
5) Connect the Test Point to its places ( I have made the test point with a normal line from A55 siemens Cable and the pin from Martech Line) see pictures 2
6) Now you need some one who can press Search on the PC heheh ;-)
7) After it says “Searching for phone... found S Blank Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK” remove the TP but hold on to the battery carefully
8) than go to the unlock tab and press Unlock VIA TP. (See my log and you will find out what to do)


Clip serial: XXXXXXXX, version: 2.18, initializing... OK
clip communication failed
Clip serial: XXXXXXXXX, version: 2.18, initializing... OK
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Clip serial: XXXXXXXXX, version: 2.18, initializing... OK
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... found Motorola Phone (V360v), getting test interface... OK
Model V360v
Firmware R4513_G_08.B7.5AR
Reading <Flex version>... clip communication failed
Clip serial: XXXXXXXXX, version: 2.18, initializing... OK
Searching for phone... found Motorola Phone (V360v), getting test interface... clip communication failed
Clip serial: XXXXXXXXX, version: 2.18, initializing... OK
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... no phone found
Searching for phone... found S Blank Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... io timeout
Searching for phone... found S Blank Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 3.00
Reading flash id... Intel-28F256L18B
Phone group: V360
Hardware IMEI: 357395002537283
Security area saved to "S Blank Neptune LTE2 357395002537283.pds"
Unlocking phone... OK


The Hardest part I found was removing the shield and I killed on phone, I’m have less knowledge in hardware side

Please let me know if any one has any problem

Note: don’t use Motorola V3 battery for unlocking, look at picture “No”, I have tried it but I was able to unlock one phone out of luck, but it is very hard, better use the correct battery

[email protected]

I’m from Fiji Islands and we also use Vodafone network, and the phones I unlocked was from Australia Vodafone, so don’t think I’m playing a games here ok friends, my previous name use Vicky ocean,

[sdr]

and repair solucion ?

[kava]

and repair solucion ?

Sorry friend no solution for reparing, but yes i have found another way of unlocking motorola V360,

Do ever thing same till when connecting, dont connect the battery on the first step, like when you search for the phone dont connect the battery.

Clip serial: xxxxxxxxx, version: 2.18, initializing... OK
Searching for phone... found S Blank Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 3.00
Reading flash id... Intel-28F256L18B
Phone group: V360
Hardware IMEI: 357395002535964
Security area saved to "S Blank Neptune LTE2 357395002535964 (1).pds"
Unlocking phone... OK



if you get and you will get it unlocked try this way out

BR
Nischal Ram