Motorola V9 testpoint good picture

[Punto-Móvil]

Hi Smart clip team,
i dont know why none has complained about the bad picture of Motorola v9 test point , as you can see ( that if you can see something ) the picture is very bad and we can t see clearly where is exactly the testpoint.
Personally i could not find it so plz upload a new one to bootloader but it should be a high quality image not as this one





Best regards

GSMUNIVERS

[FullFlash[SAM]]

tp is good

if phone have 8 codes sudsidy only

[Punto-Móvil]

Originally Posted by FullFlash[SAM]

tp is good

if phone have 8 codes sudsidy only

You misunderstood my post i meant the picture is not good at all very bad quality. i can t see where is exactly the test point.picture was taken from the side while it should have been taken from up the pcb and with better camera .if you can see it or have any idea or other image ,show me plz.

Best Regards

GSMUNIVERS

[tropa_pipz01]

picture is very clear sir......................if you cant find it bcoz it sealed you need to remove the glue

[ndhay]

@donbibi

test point image of v9 is trusted since smart-clip lunch this unlocking method....
all you do is remove sealed around the chip....

[Punto-Móvil]

Originally Posted by tropa_pipz01

picture is very clear sir......................if you cant find it bcoz it sealed you need to remove the glue

Sorry to insist brother but there is nothing clear in this picture i can t disassemble a brand new V9 without beeing sure of the testpoint .
the picture shows five fuzzy blurred points indicating the 5th one as testpoint
when i took a look to motorola v9 pcb on the internet you can t find the five points you ll find more take a look here :



i will be gratefull if u show where is the testpoint exactly here is the originlal link to this picture : here

Best Regards


GSMUNIVERS

[Punto-Móvil]

Originally Posted by ndhay

@donbibi

test point image of v9 is trusted since smart-clip lunch this unlocking method....
all you do is remove sealed around the chip....

I am not saying that method is not working am saying that test point is not visible for me in the picture given in support and that they should change with another with good quality .
you have the second picture above show me where is exactly the testpoint.

P.S : the phone am trying to unlock i think it is already unlocked because when i put a non accepted sim card and the pin numbet it show me this USIM UNLOCKED and here stuck don t go further. i can use the phone with a test card without any problem.so myabe now you have better idea about my problem .


Best Regards.

GSMUNIVERS

[tropa_pipz01]

did you try to remove the glue? you need to remove it first.............

now i know... the plate cove still there thats y