V360v unlock OK but restarts and freezes... - GSM-Forum

Spalato · 11-29-2005, 00:16

unlocked many those V360v phones and all unlocked fine except one... unlock was OK but phone works few minutes then freezes or works few minutes and then restarts or shuts down...

phone was OK before unlock...

any solution to this mather? flashing perhaps? what flash to use?

trycktill · 12-17-2005, 01:43

u must chek the test point maybe is connected to gnd or other point good luck

evan_silbert · 12-17-2005, 02:27

Or maybe shavings of metal inside are grounding if you used a dremel, etc...

11-29-2005, 00:16	#1 (permalink)
Spalato No Life Poster Join Date: Oct 2000 Location: Split / Zagreb, Croatia Age: 53 Posts: 2,290 Member: 2236 Status: Offline Thanks Meter: 58	V360v unlock OK but restarts and freezes... unlocked many those V360v phones and all unlocked fine except one... unlock was OK but phone works few minutes then freezes or works few minutes and then restarts or shuts down... phone was OK before unlock... any solution to this mather? flashing perhaps? what flash to use?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
moto u9 unlock ok but restarts evry 2-3 mins	00aa	Smart-Clip	7	01-13-2011 09:39
Samsung U700V direct unlock ok but still freezed	llcoolr	Basic Micro-Box Software Support (SAMSUNG, HUAWEI, etc...)	4	10-04-2009 13:48
M310 - Phone freeze... Unlock ok, but look still exist	Dodger	UST Pro II	3	06-15-2009 19:15
ALCATEL S920 UNLOCK OK but now is restarting	llcoolr	Basic Micro-Box Software Support (SAMSUNG, HUAWEI, etc...)	2	01-11-2009 18:00
920SC unlock ok but camera and media not work	dauyeuqn	UST Pro II	4	12-16-2008 05:10

12-17-2005, 01:43	#2 (permalink)
trycktill Freak Poster Join Date: Dec 2005 Location: new york Posts: 484 Member: 208709 Status: Offline Thanks Meter: 31	u must chek the test point maybe is connected to gnd or other point good luck

12-17-2005, 02:27	#3 (permalink)
evan_silbert No Life Poster Join Date: Feb 2003 Location: Boston Posts: 5,027 Member: 21920 Status: Offline Thanks Meter: 10	Or maybe shavings of metal inside are grounding if you used a dremel, etc...