Smart-clip not found - GSM-Forum

GSMBOURGES · 02-20-2008, 01:50

after updat 3.08 my smart clip is not found
whats solution i test in 3 pc
the bios lpt its ok and my smart clip power and not found ?

ABOUSHADY · 02-20-2008, 02:45

on smart-clip option change it to manuel
setup clip port: Combatibility

post resultat

..::Thanh_gsm::.. · 02-20-2008, 10:32

so do I, I meet the same problem and I take screenshot, after that send to SC team support mail.
and then I can update my SC to 3.09 version , all thing ok but after I use for repairing done one phone, I still continue getting the same problem.
SC not found.

cyberjhunz · 02-20-2008, 10:41

i also encountered same problems after update, help us smart-clip team.

harryscelclinic · 02-20-2008, 10:51

i encountered same problem but i changed the lpt cable to the box...now its ok...i prefer smart usb adaptor..

GSMBOURGES · 02-21-2008, 00:47

no i dont whats problem
in support lpt its ok but smart clip not fount in soft smartmoto
whats problem and solution
this sceen shoot

cyberjhunz · 02-21-2008, 01:06

save operation logs and send to smart-clip team

GSM_Support · 02-21-2008, 12:00

Please make sure that:

Firewall on your computer (or your LAN) is configured properly or disabled
You have reliable Internet connection
If you are using a Smart Adaptor select USB connection method or LPT port for LPT cable
LPT port settings are set to EPP in BIOS
Your LPT cable works properly
You have got a correct LPT port set in SmartMoto program, tab
Smart-Clip. The best way to use Auto mode
You use a stable power supply with your clip (use 12V, 750mA power adapter)
Your IE version is not lower than v5.0
If you run update under WinXP, log in as Administrator or any other account with administrative rights

To run a new SmartMoto under WinXP also to update a Smart-Clip please
launch the SmartMoto, open Smart-Clip bookmark & tick the option "Disable OS parallel port polling (requires reboot)".
After that restart you PC.
Also set LPT options in SmartMoto to compatibility.

Good luck!

Best Regards
GSMServer team

ar1el · 02-27-2008, 04:42

is compatible whit windows vista for smart clip???

Mr.Tinkertrain · 02-27-2008, 08:09

@ ar1el,

Yes, SmartMoto compatible Windows Vista.

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

ar1el · 02-27-2008, 14:23

///////////////////////////////////////////

nabildeco@yahoo · 02-27-2008, 20:20

and proberly ur sc cable connecting phone returns poles from phone .... try with another cable mate

02-20-2008, 01:50	#1 (permalink)
GSMBOURGES Banned Join Date: May 2006 Location: france Posts: 1,024 Member: 270730 Status: Offline Thanks Meter: 67	Smart-clip not found after updat 3.08 my smart clip is not found whats solution i test in 3 pc the bios lpt its ok and my smart clip power and not found ?

02-21-2008, 12:00	#8 (permalink)
GSM_Support Product Supporter Join Date: Feb 2005 Location: GSMserver Team Posts: 36,980 Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,766	Please make sure that: Firewall on your computer (or your LAN) is configured properly or disabled You have reliable Internet connection If you are using a Smart Adaptor select USB connection method or LPT port for LPT cable LPT port settings are set to EPP in BIOS Your LPT cable works properly You have got a correct LPT port set in SmartMoto program, tab Smart-Clip. The best way to use Auto mode You use a stable power supply with your clip (use 12V, 750mA power adapter) Your IE version is not lower than v5.0 If you run update under WinXP, log in as Administrator or any other account with administrative rights To run a new SmartMoto under WinXP also to update a Smart-Clip please launch the SmartMoto, open Smart-Clip bookmark & tick the option "Disable OS parallel port polling (requires reboot)". After that restart you PC. Also set LPT options in SmartMoto to compatibility. Good luck! Best Regards GSMServer team

02-27-2008, 14:23	#11 (permalink)
ar1el Junior Member Join Date: Apr 2005 Age: 50 Posts: 8 Member: 136085 Status: Offline Thanks Meter: 0	/////////////////////////////////////////// Last edited by GSM_Support; 02-27-2008 at 14:50. Reason: Contained serial number

02-27-2008, 20:20	#12 (permalink)
nabildeco@yahoo No Life Poster Join Date: Oct 2005 Location: algeria Age: 53 Posts: 633 Member: 189532 Status: Offline Thanks Meter: 28	yes and proberly ur sc cable connecting phone returns poles from phone .... try with another cable mate

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-20-2008, 02:45	#2 (permalink)
ABOUSHADY No Life Poster Join Date: Nov 2005 Location: ABouSHaDy Age: 48 Posts: 1,873 Member: 200717 Status: Offline Sonork: 100.1580056 Thanks Meter: 793	on smart-clip option change it to manuel setup clip port: Combatibility post resultat

02-20-2008, 10:32	#3 (permalink)
..::Thanh_gsm::.. No Life Poster Join Date: Dec 2005 Location: Ha Noi - Viet Nam Age: 18 Posts: 1,289 Member: 207400 Status: Offline Sonork: 100.1582556 Thanks Meter: 262	so do I, I meet the same problem and I take screenshot, after that send to SC team support mail. and then I can update my SC to 3.09 version , all thing ok but after I use for repairing done one phone, I still continue getting the same problem. SC not found.

02-20-2008, 10:41	#4 (permalink)
cyberjhunz Banned Join Date: Mar 2007 Location: www.dm3unlock.com Age: 44 Posts: 165 Member: 464389 Status: Offline Thanks Meter: 4	i also encountered same problems after update, help us smart-clip team.

02-20-2008, 10:51	#5 (permalink)
harryscelclinic Crazy Poster Join Date: Jun 2007 Location: Baguio City Philippines Age: 42 Posts: 54 Member: 531261 Status: Offline Thanks Meter: 36	i encountered same problem but i changed the lpt cable to the box...now its ok...i prefer smart usb adaptor..

02-21-2008, 01:06	#7 (permalink)
cyberjhunz Banned Join Date: Mar 2007 Location: www.dm3unlock.com Age: 44 Posts: 165 Member: 464389 Status: Offline Thanks Meter: 4	save operation logs and send to smart-clip team

02-27-2008, 04:42	#9 (permalink)
ar1el Junior Member Join Date: Apr 2005 Age: 50 Posts: 8 Member: 136085 Status: Offline Thanks Meter: 0	is compatible whit windows vista for smart clip???

02-27-2008, 08:09	#10 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ ar1el, Yes, SmartMoto compatible Windows Vista. Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Smart clip not found with Smart adapter!!!	taihv	Smart-Clip	15	10-01-2008 14:48
SMART CLIP NOT FOUND smartclip team?	GSM Solutions Ireland	Smart-Clip	37	02-03-2006 08:07
Smart-clip not found	roniri	Smart-Clip	2	12-12-2005 05:53
Smart Clip not found	thcoms	Smart-Clip	8	11-26-2005 06:42
Smart clip not found	fgl30	Smart-Clip	5	07-20-2005 15:21