|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
|
Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source | Search | Today's Posts | Mark Forums Read |
| LinkBack | Thread Tools | Display Modes |
11-25-2005, 08:34 | #1 (permalink) |
Freak Poster Join Date: Nov 2004 Age: 39
Posts: 261
Member: 92061 Status: Offline Thanks Meter: 3 | smart-clip Team Look here !!!!!!!!!!!! Clip serial: **********, version: 2.18, initializing... OK Searching for phone... found S Flash Rainbow POG, getting test interface... interface not found Switching to flash mode... OK Reading phone boot version... 5.F1 Reading bus width... OK Reading flash id... Micron-MT28F1284W18BET (x2) Phone group: C975,C980,V980 Hardware IMEI: 354991000686768 Security area saved to "S Flash Rainbow POG 354991000686768 .pds" Writing section1 D4800/1FE0000... 2% 80.4 Kb/sec sector erase error Extended sector erase error code is A00080 i can`t flash this phone always error Old boot was 6.36 i flash 5.F1 boot and Make Rsa all is done but can`t flash whats opinions !!!!!!!!!!!!! |
11-25-2005, 09:48 | #3 (permalink) |
Product Supporter Join Date: Feb 2005 Location: GSMserver Team
Posts: 36,980
Member: 121052 Status: Offline Sonork: 100.107126 Thanks Meter: 80,773 | Please make sure phone's battery is fully charged.. Best Regards Smart-clip team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com |
11-25-2005, 10:26 | #4 (permalink) |
No Life Poster Join Date: Nov 2004 Location: Capetown
Posts: 6,709
Member: 91045 Status: Offline Thanks Meter: 8,696 | Totally Agree Just Got Same problem battery was Gone...Fully Charge Battery probelm Solved..And do i need to Do repair PDS again for full Flashing SC Team plz reply and do i need to check Overwrite bootArea as well While flashing after PDS repair??? |
11-26-2005, 11:14 | #6 (permalink) |
No Life Poster Join Date: Mar 2004 Age: 46
Posts: 577
Member: 57930 Status: Offline Thanks Meter: 24 | i work in this phone with salam battery is full charge and i am always use adaptor with 9 volt phone still give this error !!!!! i use power supply and i get the same ....... !!!!!!!!!! |
11-29-2005, 20:15 | #8 (permalink) |
Freak Poster Join Date: Oct 2005 Location: Romania Age: 42
Posts: 484
Member: 188359 Status: Offline Thanks Meter: 9 | I have a similar problem. I tried flashing the phone to downgrade boot (using TP of course) it never worked, I got this error from the beginning. In my case phone's bootloader is detected as 3.10 Tried flashing with fullflash with overwrite boot area selected but SC says something about the phone eing A835 and so on then internal error 0001. Tried flashing only boot file from support and I get the same error as SALLAM, that is: Extended sector erase error code is A00080 PLEASE, PLEASE, give us the solution for this. Thank you very very much! |
11-30-2005, 09:49 | #9 (permalink) |
No Life Poster Join Date: Dec 2004 Age: 48
Posts: 790
Member: 101827 Status: Offline Thanks Meter: 23 | was trying to unlock moto c975 with smart clip, after putting the test point phone was found, after writing the boot file phone not geting on and displaying a massage boot loader 0.5.f.1 sw version: r24_u_80.2f.36.01p battery ok ok to program transfer mode: serial rs-232 and when i flash with the full flash file it gives an error after 1% extended sector erase error code is a00080, plz help me out urgent |
12-04-2005, 11:46 | #10 (permalink) |
Freak Poster Join Date: Oct 2005 Location: Romania Age: 42
Posts: 484
Member: 188359 Status: Offline Thanks Meter: 9 | Tried anything and everything that's been posted regarding this subject and nothing is working. I'm 100% certain this is not HW problem so if anyone, SC Team in particular, has a viable, working solution to this problem please don't hesitate to share. I don't know how big of a problem this is for others, but in my case I had to replace the customer's phone and this cost me a month's paycheck. So it's either starve to death or fix it. Smart-Clip support doesn't seem to care too much about my problems and won't answer me in ICQ. Maybe they'll look here... maybe.... just maybe Thanks |
Bookmarks |
Thread Tools | |
Display Modes | |
| |
Similar Threads | ||||
thread | Thread Starter | Forum | Replies | Last Post |
Smart-Clip Team Need Your Help about V9 Unlocking with Smart-clip TP ........ | ZoHaiB_(FoneGSM) | Smart-Clip | 2 | 06-23-2008 15:59 |
Problems updating my Smart-Clip please help me Smart-Clip Team | tito millo | Smart-Clip | 1 | 09-22-2007 10:22 |
v3T unlocking ? smart clip team look here plz | gsmservices | Smart-Clip | 5 | 11-25-2006 19:13 |
To Smart Clip Team Is my smart clip killed? | ChouChou | Smart-Clip | 14 | 08-04-2004 09:33 |
|