Smartmoto doesn´t recognise com ports? - GSM-Forum

surfer2go · 04-16-2008, 19:04

hi

I have Smart clip and s card with newest version but I can not manage to unlock F3 or j110 phones I have read the solution on Faq page of smart-clip.com but it doesn´t work for me

I select com port select F3 and chose that comport which is installed in hardware manager as Siemens cabel (I have F3 usb Cabel) when smart moto say power on phone I press power on but nothing happens phone swich on and thats all smart moto still keep on saying power on Phone

what can be the reason for that I have already uninstalled and reinstalled usb drivers for F3 but still doesn´t work

thank you for answers

greetings

surfer2go

phil8100 · 04-16-2008, 20:31

sounds like cable or driver problem, did you install driver before pluging in cable?

Good luck
Phil

surfer2go · 04-17-2008, 09:22

no i have pluged in cabel first and installed driver after my PC asked for

Mr.Tinkertrain · 04-17-2008, 10:26

@ surfer2go,

Please tell us what COM port your OS choose, and what COM port you select in Smartmoto.

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

surfer2go · 04-17-2008, 17:17

my os choose com 7 (I Can Change com port on hardwaremanager iff nessesary) and I also choose Com 7 in Smart moto

GsM-BawA · 04-17-2008, 17:42

do u have infinity box?

surfer2go · 04-17-2008, 17:46

no only Smart-Clip, Twister+ Hwk, Jaf, SeToolbox 3, NsPro, Greatflasher Master and Slave

Thats all

but Im going to buy an Infinity

Mr.Tinkertrain · 04-18-2008, 07:22

@ surfer2go,

Try to choose other COM port and run unlock procedure once again.

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

surfer2go · 04-18-2008, 09:41

@Mr.Tintertrain

I tried Com 10, 2, 4 , 5 with same result

I think my smart clip is the problem becouse I also cant unlock J110 and this is a RJ45 Cabel which is directly connected to Smart clip

Mr.Tinkertrain · 04-18-2008, 09:47

@ surfer2go,

Please double check unlock manual.
The phone has to be connected diretly to the USB port of the PC.

Quote:

Compal models require to be connected to PC COM port via original COM data cable or using any COM port emulator.

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

FullFLASHgSMPH · 04-18-2008, 09:47

@ surfer2go,

restart pc bro..

surfer2go · 04-18-2008, 10:11

I know that I have to connect directly to usb ports of PC I tried all usb ports of pc and I have changed to Com 5 and also rebooted my PC

surfer2go · 04-18-2008, 10:17

@Mr.Tintertrain
I Know that I have to connect direct to usb ports of PC I already tried all Usb ports

Now I have Changed com to 5 and restarted but no result

edit: sorry for doubble posting

surfer2go · 04-18-2008, 11:38

I think I´ll Send my smart clip back to reseller

Mr.Tinkertrain · 04-18-2008, 12:03

@ surfer2go,

Unlock procedure of f3 handset don't have nothing common with the Smart-Clip.
To unlock the phone, connect it (powered off) directly to the PC USB port, install drivers, select right COM port in the SmartMoto, Press Unlock button, power On the phone.
Note: S-Card suppose to be connected to the PC for unlock procedure to be completed successfully.

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

04-16-2008, 19:04	#1 (permalink)
surfer2go Freak Poster Join Date: May 2001 Posts: 328 Member: 4615 Status: Offline Thanks Meter: 0	Smartmoto doesn´t recognise com ports? hi I have Smart clip and s card with newest version but I can not manage to unlock F3 or j110 phones I have read the solution on Faq page of smart-clip.com but it doesn´t work for me I select com port select F3 and chose that comport which is installed in hardware manager as Siemens cabel (I have F3 usb Cabel) when smart moto say power on phone I press power on but nothing happens phone swich on and thats all smart moto still keep on saying power on Phone what can be the reason for that I have already uninstalled and reinstalled usb drivers for F3 but still doesn´t work thank you for answers greetings surfer2go

04-18-2008, 10:17	#13 (permalink)
surfer2go Freak Poster Join Date: May 2001 Posts: 328 Member: 4615 Status: Offline Thanks Meter: 0	@Mr.Tintertrain I Know that I have to connect direct to usb ports of PC I already tried all Usb ports Now I have Changed com to 5 and restarted but no result edit: sorry for doubble posting Last edited by surfer2go; 04-18-2008 at 10:27.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Serial Com port to Nokia Pop Port Cable (for BB5 unlock) - Tested	LAD	Nokia Base Band 5 ( BB-5 )	27	04-28-2013 19:12
i cant unlock on com port with smti 'error openning com port	juniorha	SMTi	4	08-17-2008 20:46
Rj45 port to com port	mobitek	Twisterflasher	3	11-08-2005 19:50
My smartmoto doesn´t find my smart clip !!!	todoportable	Smart-Clip	6	07-07-2005 11:14

04-16-2008, 20:31	#2 (permalink)
phil8100 Junior Member Join Date: Jan 2008 Posts: 29 Member: 688538 Status: Offline Thanks Meter: 4	sounds like cable or driver problem, did you install driver before pluging in cable? Good luck Phil

04-17-2008, 09:22	#3 (permalink)
surfer2go Freak Poster Join Date: May 2001 Posts: 328 Member: 4615 Status: Offline Thanks Meter: 0	no i have pluged in cabel first and installed driver after my PC asked for

04-17-2008, 10:26	#4 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ surfer2go, Please tell us what COM port your OS choose, and what COM port you select in Smartmoto. Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

04-17-2008, 17:17	#5 (permalink)
surfer2go Freak Poster Join Date: May 2001 Posts: 328 Member: 4615 Status: Offline Thanks Meter: 0	my os choose com 7 (I Can Change com port on hardwaremanager iff nessesary) and I also choose Com 7 in Smart moto

04-17-2008, 17:42	#6 (permalink)
GsM-BawA Freak Poster Join Date: Dec 2007 Location: Earth Posts: 156 Member: 647828 Status: Offline Thanks Meter: 1	do u have infinity box?

04-17-2008, 17:46	#7 (permalink)
surfer2go Freak Poster Join Date: May 2001 Posts: 328 Member: 4615 Status: Offline Thanks Meter: 0	no only Smart-Clip, Twister+ Hwk, Jaf, SeToolbox 3, NsPro, Greatflasher Master and Slave Thats all but Im going to buy an Infinity

04-18-2008, 07:22	#8 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ surfer2go, Try to choose other COM port and run unlock procedure once again. Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

04-18-2008, 09:41	#9 (permalink)
surfer2go Freak Poster Join Date: May 2001 Posts: 328 Member: 4615 Status: Offline Thanks Meter: 0	@Mr.Tintertrain I tried Com 10, 2, 4 , 5 with same result I think my smart clip is the problem becouse I also cant unlock J110 and this is a RJ45 Cabel which is directly connected to Smart clip

04-18-2008, 09:47	#11 (permalink)
FullFLASHgSMPH Banned Join Date: Jul 2005 Location: Philippines Age: 53 Posts: 4,639 Member: 161739 Status: Offline Sonork: 100.1584054 Thanks Meter: 3,338	@ surfer2go, restart pc bro..

04-18-2008, 10:11	#12 (permalink)
surfer2go Freak Poster Join Date: May 2001 Posts: 328 Member: 4615 Status: Offline Thanks Meter: 0	I know that I have to connect directly to usb ports of PC I tried all usb ports of pc and I have changed to Com 5 and also rebooted my PC

04-18-2008, 11:38	#14 (permalink)
surfer2go Freak Poster Join Date: May 2001 Posts: 328 Member: 4615 Status: Offline Thanks Meter: 0	I think I´ll Send my smart clip back to reseller

04-18-2008, 12:03	#15 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ surfer2go, Unlock procedure of f3 handset don't have nothing common with the Smart-Clip. To unlock the phone, connect it (powered off) directly to the PC USB port, install drivers, select right COM port in the SmartMoto, Press Unlock button, power On the phone. Note: S-Card suppose to be connected to the PC for unlock procedure to be completed successfully. Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com