unlock Sendo S360

[ejazkhan9]

Hello Sc Team and Mates
im unlocking Sendo S360 With Smart Clip
when i insert RJ 45 cable in smart clip RX and TX light turn on
this is strange
i checked cable pin out its kool
i m not using batt while i m giving powre with adopter
Sendo is always a strange fone for me
kindly help me in unlocking this starnge thing

BR

[Mr.Tinkertrain]

Hello ejazkhan9,

Sendo snd2xx/snd3xx/snd5xx/snd6xx/snd8xx unlocking procedure

1. Power off the phone
2. Connect clip to the phone using RJ45 cable (pinouts below)
3. Press UNLOCK button
4. Press Power button on the phone within 5 seconds after you press UNLOCK button on a clip. RX/TX leds will blink
5. E/G led will glow green on success.

When you unlock Sendo phone use either fully charged phone battery OR power supply from Smart-Clip. Don't use them both at the same time! If you use power supply from Smart-Clip, make sure current is not less than 300mA, otherwise not all data will be properly recorded to the phone.

You can find Pinout for Sendo snd2xx snd3xx snd6xx here http://www.smart-clip.com/pinout-snd2xx3xx6xx.png

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

[ejazkhan9]

Originally Posted by Mr.Tinkertrain

Hello ejazkhan9,

Sendo snd2xx/snd3xx/snd5xx/snd6xx/snd8xx unlocking procedure

1. Power off the phone
2. Connect clip to the phone using RJ45 cable (pinouts below)
3. Press UNLOCK button
4. Press Power button on the phone within 5 seconds after you press UNLOCK button on a clip. RX/TX leds will blink
5. E/G led will glow green on success.

When you unlock Sendo phone use either fully charged phone battery OR power supply from Smart-Clip. Don't use them both at the same time! If you use power supply from Smart-Clip, make sure current is not less than 300mA, otherwise not all data will be properly recorded to the phone.

You can find Pinout for Sendo snd2xx snd3xx snd6xx here http://www.smart-clip.com/pinout-snd2xx3xx6xx.png

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

this method is not working boss
and this is major problem while unlocking Sendo
i face them many time
Smart Clip is Best for Motorolla
but not that good for Sendo



WBR

Ejaz Khan

[rolly_van]

nice solution mate Mr.Tinkertrain it is working and my sendo s360 working in all networks but i replace 2.4k to 2.2k in your pin-outs,,,same procedure,,,,thanks again...

[andy_lecnah]

nice solution mate Mr.Tinkertrain it is working and my sendo s360 working and i never replace any resistor.