V3r dead after unlock. - GSM-Forum

sjakie · 06-09-2006, 23:26

After unlock by tespoint phone doesnt work any more.
When insert batterie on LCD shows

Critical error
DE
AD

---------------------------------------------------------------------------------
Searching for phone... found S Blank Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 3.00
Reading flash id... ST-M30L0R8000B0
Reading flash id/2... OK, none
Phone group: V235,V360,V360v,V3i,V3r,L7,L7v
Hardware IMEI: 359419001756633
Security area saved to "S Blank Neptune LTE2 359419001756633.pds"
Unlocking phone... OK
-----------------------------------------------------------------------------------

Restore security area doenst fix it.
Can get into testmode.

How to repair it?

Regards
Sjakie

V3r
0A.30

sjakie · 06-10-2006, 08:58

Hi, cannot download from suppport
Bought clip 2005 -09-1
but access expired at
2006-01-21 00:00:00

How too repair?
Dont want to buy a new one for customer.

regards
Sjakie

Mr.Tinkertrain · 06-10-2006, 09:05

@ sjakie,

Try to make Repair PDS and after that Full Flash the phone.

about Boot-loader please read this : http://www.boot-loader.com/index.php...id=7&Itemid=25

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

sjakie · 06-10-2006, 09:38

Hi. tried too flash shx file in pc mode

searching for phone... found Motorola P2K, getting test interface... interface not found
Chipset type 19 is not supported.
MA type 0 is not supported.
[Unknown UT]: Device S Blank Neptune LTE2 is not supported.
***Error*** Unable to connect to the Subscriber Unit. Unable to get string descriptors.

Mr.Tinkertrain · 06-10-2006, 09:39

@ sjakie,

Try to download *.smf file and make Repair Pds and Full Flash

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

sjakie · 06-10-2006, 11:58

Ok, i paid for access flashes.
Repaired PDS area
Flashed V3r_R4515_G_08[1].BD.44R_lp002E_full_flash.smf
With and without overwrite boot area
restored security area.

StilSearching for phone... found S Blank Neptune LTE2, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 3.00
Reading flash id... ST-M30L0R8000B0
Reading flash id/2... OK, none
Phone group: V235,V360,V360v,V3i,V3r,L7,L7v
Hardware IMEI: 359419001756633
Security area saved to "S Blank Neptune LTE2 359419001756633 (14).pds"
Login request... OK
Writing section0 done
Writing section1 done
Restarting phone... OK
Searching for phone... found S Blank Neptune LTE2
Switching to flash mode... OK
connecting to server... cannot connect to the server
Login request... OK
Writing section0 done
Writing section1 done
Restarting phone... OK
Searching for phone... found S Blank Neptune LTE2
Switching to flash mode... OK
Repair PDS request... OK
Performing PDS repair... OK
Writing section0 done
Please write a corresponding Full_flash file to phone to accomplish repair
Writing section0 boot done
Writing section1 done
Flash completed!
Turning phone off... OK

same problem.
Critical error
DE
AD
Regards
Sjakie

gsm3005 · 06-10-2006, 16:16

have u try it to unlock again if not try to unlock again may help you

mohangbvk · 06-10-2006, 16:25

boot with testpoint restore security area on backup screen
select PDS file in "Program Files\GsmServer\SmartMoto\security backup"
which created when unlocking the phone imei should be same (i have sucess a1000)

sjakie · 06-11-2006, 21:40

Hi, thanks for reply.

Tried it all , still the same

Regards
Sjakie

micmac · 06-12-2006, 15:01

Hi

always smart clip have a pb for a boot loader for the new phones

this v3r have boot 0A.30 and u must upload boot file 0A.30 and full flash r4515 and he's repaired but there is no boot loader 0A.30 in support for repair this phone

sjakie · 06-12-2006, 15:20

Hi, there is a bootfile called in support
V3r_boot_A[1].30.smf
But didnt help me.

Still gives me error, it was a T-mobile firmware.

Whats difference in soft between V3 or V3r, i seen no cardreader in V3r.
Maybe i can buy for customer V3 pcb and lcd and upload camcorder enabled
soft?
Any difference then with V3r ?

regards
Sjakie

olajosadri · 06-14-2006, 17:36

Hi. I have a V3i and It`s warming when I insert the battery. pls help me... give me some tips,tricks or service manual. any kind of help will be great...
thx

tong@ · 06-15-2006, 05:41

Quote:

Originally Posted by olajosadri

Hi. I have a V3i and It`s warming when I insert the battery. pls help me... give me some tips,tricks or service manual. any kind of help will be great...
thx

open it up i see one ic have problem it very hot it die and black ic you go open the sink and post pic without ic the again i mark the ic i donot know that ic

sjakie · 06-15-2006, 11:48

Hi, im still waiting for help from support.
Why you come in here with your problem.
Make your own topic, this has nothing too do with my problem.

Regards
Sjakie

theXtreme · 08-04-2006, 17:50

hi guys

same thing happaned to a friend of mine today. I brought me the phone .. i tried everything by the book ... repair pds .. flash it ... no luck ... still critical error. looks like another unsuported boot like the l7

cheers

06-09-2006, 23:26	#1 (permalink)
sjakie No Life Poster Join Date: Jan 2000 Location: NL Age: 55 Posts: 1,380 Member: 847 Status: Offline Thanks Meter: 36	V3r dead after unlock. After unlock by tespoint phone doesnt work any more. When insert batterie on LCD shows Critical error DE AD --------------------------------------------------------------------------------- Searching for phone... found S Blank Neptune LTE2, getting test interface... interface not found Switching to flash mode... OK Reading phone boot version... 3.00 Reading flash id... ST-M30L0R8000B0 Reading flash id/2... OK, none Phone group: V235,V360,V360v,V3i,V3r,L7,L7v Hardware IMEI: 359419001756633 Security area saved to "S Blank Neptune LTE2 359419001756633.pds" Unlocking phone... OK ----------------------------------------------------------------------------------- Restore security area doenst fix it. Can get into testmode. How to repair it? Regards Sjakie V3r 0A.30 Last edited by sjakie; 06-10-2006 at 02:02.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V3r dead after unlocking	SALNAI	Motorola P2k	8	07-09-2007 12:38
Need Help V3r Dead After Unlock	boubasakcom	Motorola P2k	6	01-15-2007 09:34
v3r dead after unlock	akbarbaba	Motorola P2k	20	10-27-2006 13:10
v3r dead after unlock	SilentKiller	Smart-Clip	3	07-11-2006 17:06
v3r dead after unlock (for GSMServer team attentions)	bogdancirlogea	Smart-Clip	8	05-09-2006 14:44

06-10-2006, 08:58	#2 (permalink)
sjakie No Life Poster Join Date: Jan 2000 Location: NL Age: 55 Posts: 1,380 Member: 847 Status: Offline Thanks Meter: 36	Hi, cannot download from suppport Bought clip 2005 -09-1 but access expired at 2006-01-21 00:00:00 How too repair? Dont want to buy a new one for customer. regards Sjakie

06-10-2006, 09:05	#3 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ sjakie, Try to make Repair PDS and after that Full Flash the phone. about Boot-loader please read this : http://www.boot-loader.com/index.php...id=7&Itemid=25 Best Regards Smart-clip team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

06-10-2006, 09:38	#4 (permalink)
sjakie No Life Poster Join Date: Jan 2000 Location: NL Age: 55 Posts: 1,380 Member: 847 Status: Offline Thanks Meter: 36	Hi. tried too flash shx file in pc mode searching for phone... found Motorola P2K, getting test interface... interface not found Chipset type 19 is not supported. MA type 0 is not supported. [Unknown UT]: Device S Blank Neptune LTE2 is not supported. *Error* Unable to connect to the Subscriber Unit. Unable to get string descriptors.

06-10-2006, 09:39	#5 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ sjakie, Try to download *.smf file and make Repair Pds and Full Flash Best Regards Smart-clip team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

06-10-2006, 11:58	#6 (permalink)
sjakie No Life Poster Join Date: Jan 2000 Location: NL Age: 55 Posts: 1,380 Member: 847 Status: Offline Thanks Meter: 36	Ok, i paid for access flashes. Repaired PDS area Flashed V3r_R4515_G_08[1].BD.44R_lp002E_full_flash.smf With and without overwrite boot area restored security area. StilSearching for phone... found S Blank Neptune LTE2, getting test interface... interface not found Switching to flash mode... OK Reading phone boot version... 3.00 Reading flash id... ST-M30L0R8000B0 Reading flash id/2... OK, none Phone group: V235,V360,V360v,V3i,V3r,L7,L7v Hardware IMEI: 359419001756633 Security area saved to "S Blank Neptune LTE2 359419001756633 (14).pds" Login request... OK Writing section0 done Writing section1 done Restarting phone... OK Searching for phone... found S Blank Neptune LTE2 Switching to flash mode... OK connecting to server... cannot connect to the server Login request... OK Writing section0 done Writing section1 done Restarting phone... OK Searching for phone... found S Blank Neptune LTE2 Switching to flash mode... OK Repair PDS request... OK Performing PDS repair... OK Writing section0 done Please write a corresponding Full_flash file to phone to accomplish repair Writing section0 boot done Writing section1 done Flash completed! Turning phone off... OK same problem. Critical error DE AD Regards Sjakie

06-10-2006, 16:16	#7 (permalink)
gsm3005 Freak Poster Join Date: Feb 2005 Location: on earth Posts: 465 Member: 120740 Status: Offline Thanks Meter: 3	have u try it to unlock again if not try to unlock again may help you

06-10-2006, 16:25	#8 (permalink)
mohangbvk Freak Poster Join Date: Feb 2005 Age: 52 Posts: 125 Member: 114143 Status: Offline Thanks Meter: 55	boot with testpoint restore security area on backup screen select PDS file in "Program Files\GsmServer\SmartMoto\security backup" which created when unlocking the phone imei should be same (i have sucess a1000)

06-11-2006, 21:40	#9 (permalink)
sjakie No Life Poster Join Date: Jan 2000 Location: NL Age: 55 Posts: 1,380 Member: 847 Status: Offline Thanks Meter: 36	Hi, thanks for reply. Tried it all , still the same Regards Sjakie

06-12-2006, 15:01	#10 (permalink)
micmac No Life Poster Join Date: Mar 2002 Location: tunis,tunisia Age: 48 Posts: 1,450 Member: 10396 Status: Offline Thanks Meter: 32	Hi always smart clip have a pb for a boot loader for the new phones this v3r have boot 0A.30 and u must upload boot file 0A.30 and full flash r4515 and he's repaired but there is no boot loader 0A.30 in support for repair this phone

06-12-2006, 15:20	#11 (permalink)
sjakie No Life Poster Join Date: Jan 2000 Location: NL Age: 55 Posts: 1,380 Member: 847 Status: Offline Thanks Meter: 36	Hi, there is a bootfile called in support V3r_boot_A[1].30.smf But didnt help me. Still gives me error, it was a T-mobile firmware. Whats difference in soft between V3 or V3r, i seen no cardreader in V3r. Maybe i can buy for customer V3 pcb and lcd and upload camcorder enabled soft? Any difference then with V3r ? regards Sjakie

06-15-2006, 11:48	#14 (permalink)
sjakie No Life Poster Join Date: Jan 2000 Location: NL Age: 55 Posts: 1,380 Member: 847 Status: Offline Thanks Meter: 36	Hi, im still waiting for help from support. Why you come in here with your problem. Make your own topic, this has nothing too do with my problem. Regards Sjakie

08-04-2006, 17:50	#15 (permalink)
theXtreme Freak Poster Join Date: Mar 2004 Age: 47 Posts: 175 Member: 58522 Status: Offline Thanks Meter: 10	hi guys same thing happaned to a friend of mine today. I brought me the phone .. i tried everything by the book ... repair pds .. flash it ... no luck ... still critical error. looks like another unsuported boot like the l7 cheers