V3re Boot C.C1 : unlock ok - GSM-Forum

zeel_zeel · 01-08-2008, 16:06

Moto V3re Boot C.C1 unlocked successfully with ease.

Clip serial: xxxxxxxxx, version: 4.01, initializing... OK
Searching for phone... no phone found
Searching for phone... found Motorola Phone (V3re), getting test interface... OK
Model V3re
Firmware R3442A_G_0E.43.08R
Switching to flash mode... OK [S Flash Neptune LTE2]
Reading phone boot version... C.C1
Sending boot... OK
Stored temporary backup to C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_F929AE37DF815405.bk_
Searching for phone... found Motorola Phone (V3re), getting test interface... OK
Switching to flash mode... OK [S Flash Neptune LTE2]
Reading phone boot version... C.C1
Sending boot... OK
Erasing flash memory OK
Sending firmware OK
Searching for phone... found S Flash Neptune LTE2
Switching to flash mode... OK
Reading phone boot version... 0.00
Reading flash id... ST - M58LR256A
Phone group: V3re
Hardware IMEI: 359615010xxxxxx
IMEI OTP status: locked
Security area saved to "PDS for S Flash Neptune LTE2 359615010206052.mbk"
Performing restore from temparary backup file C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_F929AE37DF815405.bk_
Restore OK
Unlocking phone... OK

Smart-Clip is ON.....

khalid059 · 01-13-2008, 10:43

help me plz

when i unlock v3re unlock ok ..... no lcd
black lcd

sonetek · 01-13-2008, 12:03

does it still require smart test point cable to unlock?

Supplier4unlock · 01-13-2008, 12:42

@sonetek must be need smart testpoint cable.

Supplier4unlock · 01-13-2008, 13:07

@khalid059
do u remove lcd {when connect smart testpoint cable}-- ???

khalid059 · 01-14-2008, 14:39

Quote:

Originally Posted by RMOBILE.COM

@khalid059
do u remove lcd {when connect smart testpoint cable}-- ???

yes i remove lcd and speaker and all just connect board

GsmGalant · 01-16-2008, 15:55

Quote:

Originally Posted by khalid059

help me plz

when i unlock v3re unlock ok ..... no lcd
black lcd

I hawe same problem, Unlock sucessfull but black inside display, Front display work normal.
Mr. Tinkertrain any sugestion?

3lsheikh · 01-16-2008, 16:36

i have dede one whith bootloader 4.00
any suggestions

Mr.Tinkertrain · 01-16-2008, 16:47

@ elsheikh,

In most cases when boot version get read as 4.00 it shows that the handset has hardware malfunction, most probably that the flash chip is damaged.

@ GsmGalant & khalid059,

Please make sure that LCD connected properly.
Also check the mainboard of the phone and ensure that it doesn't have any malfunctions or short circuit.

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

GsmGalant · 01-16-2008, 17:03

Thank you for fast reply but phone work with all sim cart, only inside display black.

3lsheikh · 01-16-2008, 18:21

Mr.Tinkertrain
thank you for your answer
i will try chang flash chip

nguyenlaanh · 01-20-2008, 06:06

nice share ..thank bro

lincolnlinks · 01-26-2008, 19:47

gsm server advertised 2 different types of smart test point cable. please are there different smart test point cable.version 2.0 and the other one.

Mr.Tinkertrain · 01-28-2008, 09:03

@ lincolnlinks,

Smart TestPoint cable version 2.0, it is modified cable for such models as k1s and M702iG.
For more detailed info, check this link please.

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

Mohsin-* · 02-04-2008, 12:21

plz bro share test point

01-08-2008, 16:06	#1 (permalink)
zeel_zeel No Life Poster Join Date: Dec 2005 Location: NEAR YOU Posts: 2,662 Member: 205427 Status: Offline Sonork: 100.1580937 Thanks Meter: 1,162	V3re Boot C.C1 : unlock ok Moto V3re Boot C.C1 unlocked successfully with ease. Clip serial: xxxxxxxxx, version: 4.01, initializing... OK Searching for phone... no phone found Searching for phone... found Motorola Phone (V3re), getting test interface... OK Model V3re Firmware R3442A_G_0E.43.08R Switching to flash mode... OK [S Flash Neptune LTE2] Reading phone boot version... C.C1 Sending boot... OK Stored temporary backup to C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_F929AE37DF815405.bk_ Searching for phone... found Motorola Phone (V3re), getting test interface... OK Switching to flash mode... OK [S Flash Neptune LTE2] Reading phone boot version... C.C1 Sending boot... OK Erasing flash memory OK Sending firmware OK Searching for phone... found S Flash Neptune LTE2 Switching to flash mode... OK Reading phone boot version... 0.00 Reading flash id... ST - M58LR256A Phone group: V3re Hardware IMEI: 359615010xxxxxx IMEI OTP status: locked Security area saved to "PDS for S Flash Neptune LTE2 359615010206052.mbk" Performing restore from temparary backup file C:\Program Files\GsmServer\SmartMoto\temporary backup\bkp_F929AE37DF815405.bk_ Restore OK Unlocking phone... OK Smart-Clip is ON.....

01-13-2008, 10:43	#2 (permalink)
khalid059 Registered User Join Date: Sep 2007 Location: palestine Age: 41 Posts: 261 Member: 592201 Status: Offline Sonork: 100.114536 Thanks Meter: 160	v3re after unlock help me plz when i unlock v3re unlock ok ..... no lcd black lcd

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Motorola V3Re boot 0c.c1 only boot!!!	italiano.a	Smart-Clip	3	01-25-2010 08:26
smartclip can not unlock v3re boot c.c1. please sc team	Bao Tran	Smart-Clip	11	03-26-2009 02:52
V3re boot version 0C.F4 unlocked Successfully..	harim_1981	Smart-Clip	2	06-04-2008 23:21
Once Again V3re Boot C.C1 : unlock ok	zeel_zeel	Smart-Clip	0	02-26-2008 07:16

01-13-2008, 12:03	#3 (permalink)
sonetek No Life Poster Join Date: Nov 2005 Location: Port Harcourt Nigeria Age: 51 Posts: 1,079 Member: 197720 Status: Offline Thanks Meter: 24	does it still require smart test point cable to unlock?

01-13-2008, 12:42	#4 (permalink)
Supplier4unlock Freak Poster Join Date: Nov 2007 Location: USA Age: 34 Posts: 219 Member: 623813 Status: Offline Thanks Meter: 9	@sonetek must be need smart testpoint cable.

01-13-2008, 13:07	#5 (permalink)
Supplier4unlock Freak Poster Join Date: Nov 2007 Location: USA Age: 34 Posts: 219 Member: 623813 Status: Offline Thanks Meter: 9	@khalid059 do u remove lcd {when connect smart testpoint cable}-- ???

01-16-2008, 16:36	#8 (permalink)
3lsheikh Freak Poster Join Date: Jun 2007 Location: EGYPT Posts: 124 Member: 521296 Status: Offline Sonork: 100.1574136 Thanks Meter: 21	i have dede one whith bootloader 4.00 any suggestions

01-16-2008, 16:47	#9 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ elsheikh, In most cases when boot version get read as 4.00 it shows that the handset has hardware malfunction, most probably that the flash chip is damaged. @ GsmGalant & khalid059, Please make sure that LCD connected properly. Also check the mainboard of the phone and ensure that it doesn't have any malfunctions or short circuit. Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

01-16-2008, 17:03	#10 (permalink)
GsmGalant No Life Poster Join Date: Oct 2004 Location: Kosova Posts: 919 Member: 87568 Status: Offline Thanks Meter: 101	Thank you for fast reply but phone work with all sim cart, only inside display black.

01-16-2008, 18:21	#11 (permalink)
3lsheikh Freak Poster Join Date: Jun 2007 Location: EGYPT Posts: 124 Member: 521296 Status: Offline Sonork: 100.1574136 Thanks Meter: 21	Mr.Tinkertrain thank you for your answer i will try chang flash chip

01-20-2008, 06:06	#12 (permalink)
nguyenlaanh Freak Poster Join Date: Nov 2007 Location: VIET NAM Posts: 127 Member: 623592 Status: Offline Thanks Meter: 38	nice share ..thank bro

01-26-2008, 19:47	#13 (permalink)
lincolnlinks Freak Poster Join Date: Apr 2007 Location: nigeria Posts: 240 Member: 487753 Status: Offline Thanks Meter: 4	gsm server advertised 2 different types of smart test point cable. please are there different smart test point cable.version 2.0 and the other one.

01-28-2008, 09:03	#14 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ lincolnlinks, Smart TestPoint cable version 2.0, it is modified cable for such models as k1s and M702iG. For more detailed info, check this link please. Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

02-04-2008, 12:21	#15 (permalink)
Mohsin-* No Life Poster Join Date: Dec 2006 Location: Pakistan/UAE/WorldWide Posts: 8,288 Member: 417298 Status: Offline Sonork: 100.1578269 Thanks Meter: 18,268	plz bro share test point