v3re unlocking problem any help? - GSM-Forum

donex74 · 12-30-2008, 06:17

Team,

can i ask your assistance about this problem unlocking v3re, there's an error? when i use prepare smart testpoint.

SmartMoto 3.20
S-Card: xxxxxxx Smart-Clip dongle, v 2.10, assigned Smart-Clip: xxxxxxx Europe, initializing... OK
Smart Adaptor: serial xxxxxx, firmware version 1.05
Clip serial: xxxxxx, version: 4.08, initializing... OK
Searching for phone... found Motorola Phone (V3re), getting test interface... OK
Model V3re
Firmware R3442A_G_0E.43.04R_A
Switching to flash mode... OK [S Flash Neptune LTE2]
Reading phone boot version... C.C1
Sending boot... OK
failed
io timeout
Searching for phone... found Motorola Phone (V3re), getting test interface... OK
Model V3re
Firmware R3442A_G_0E.43.04R_A
Reading info OK

donex74 · 12-30-2008, 06:35

the error appears:

CRITICAL ERROR
0085
00CA

on the screen?

UNIQUEM · 12-30-2008, 07:09

Quote:

Originally Posted by donex74

the error appears:

CRITICAL ERROR
0085
00CA

on the screen?

Tp is not connecting properly (Reading phone boot version... C.C1)
handset must boot as 0.00 in prepairing

Regards

donex74 · 12-30-2008, 07:40

it was on the first step preparing smart testpoint not on the testpoint proper.

oliverous · 12-30-2008, 07:47

use 12V of power supply...

BR
OliverouS

xerraco · 12-30-2008, 07:57

Use Full Charge Batt & 12Vdc 750 Supply to Clip.

joe zack · 01-03-2009, 05:19

when i do the prrpare this problem aim having look at the pic??/dosnt not read boot loader as 00.0

xerraco · 01-03-2009, 05:25

Quote:

Originally Posted by joe zack

when i do the prrpare this problem aim having look at the pic??/dosnt not read boot loader as 00.0

If that is Phone has HW problem, look pcb for shortage.

Mr.Tinkertrain · 01-05-2009, 08:49

@ joe zack,

Please expalin in more details what problem you have. Show us some log files without serial numbers.

Best Regards
Smart-clip team
www.smart-clip.com
www.scoutdongle.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

12-30-2008, 06:17	#1 (permalink)
donex74 Freak Poster Join Date: Apr 2005 Location: somewhere Age: 49 Posts: 209 Member: 133465 Status: Offline Thanks Meter: 15	v3re unlocking problem any help? Team, can i ask your assistance about this problem unlocking v3re, there's an error? when i use prepare smart testpoint. SmartMoto 3.20 S-Card: xxxxxxx Smart-Clip dongle, v 2.10, assigned Smart-Clip: xxxxxxx Europe, initializing... OK Smart Adaptor: serial xxxxxx, firmware version 1.05 Clip serial: xxxxxx, version: 4.08, initializing... OK Searching for phone... found Motorola Phone (V3re), getting test interface... OK Model V3re Firmware R3442A_G_0E.43.04R_A Switching to flash mode... OK [S Flash Neptune LTE2] Reading phone boot version... C.C1 Sending boot... OK failed io timeout Searching for phone... found Motorola Phone (V3re), getting test interface... OK Model V3re Firmware R3442A_G_0E.43.04R_A Reading info OK

12-30-2008, 07:47	#5 (permalink)
oliverous Freak Poster Join Date: Jun 2007 Location: Land Of Terror (Novus) Age: 43 Posts: 245 Member: 530344 Status: Offline Sonork: 100.1583021 Thanks Meter: 41	use use 12V of power supply... BR OliverouS

01-03-2009, 05:19	#7 (permalink)
joe zack Freak Poster Join Date: Jul 2006 Posts: 287 Member: 307625 Status: Offline Thanks Meter: 25	i have same problem unlocking v3re????? when i do the prrpare this problem aim having look at the pic??/dosnt not read boot loader as 00.0

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
v3re unlock field pleas help me how to unlock	lilong_lee	Smart-Clip	8	02-05-2010 14:03
V3re unlock problem	F@RUK S	Smart-Clip	20	06-24-2009 07:51
V3re unlock problem help	doonyi	Smart-Clip	1	03-03-2009 08:30
v3re unlocking problem	patric	Smart-Clip	2	01-02-2008 09:50
V3re Unlock Problem	.:Towhid:.	Smart-Clip	12	12-17-2007 11:53

12-30-2008, 06:35	#2 (permalink)
donex74 Freak Poster Join Date: Apr 2005 Location: somewhere Age: 49 Posts: 209 Member: 133465 Status: Offline Thanks Meter: 15	the error appears: CRITICAL ERROR 0085 00CA on the screen?

12-30-2008, 07:40	#4 (permalink)
donex74 Freak Poster Join Date: Apr 2005 Location: somewhere Age: 49 Posts: 209 Member: 133465 Status: Offline Thanks Meter: 15	it was on the first step preparing smart testpoint not on the testpoint proper.

12-30-2008, 07:57	#6 (permalink)
xerraco No Life Poster Join Date: Nov 2008 Location: RVIII Posts: 11,696 Member: 890926 Status: Offline Thanks Meter: 2,053	Use Full Charge Batt & 12Vdc 750 Supply to Clip.

01-05-2009, 08:49	#9 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ joe zack, Please expalin in more details what problem you have. Show us some log files without serial numbers. Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com