V3x boot 0.6.8.3 - GSM-Forum

nagval · 12-28-2006, 11:45

V3x boot 0.6.8.3 is smart-clip can unlock it?
r252211ld_u_85.97.f63p

Mr.Tinkertrain · 12-28-2006, 11:56

@ nagval,

Please make a backup from this V3x, boot 6.8.3 and send it to support[at]smart-clip.com in few letters with rar parts up to 8Mb. Also please read all info from the phone and send it to me in Private Message or include it in letter.

About the handset, that backup was made from:
- Model
- IMEI
- User code
- Security code
- Operation band
- Firmware
- Flex version
- Language pack

To get full handset information, please connect powered ON phone to SmartMoto via Smart-Clip, open an INFORMATION tab and press SEARCH.

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

luskao · 12-28-2006, 11:57

Yes I did some of them already

BR

Luskao

luskao · 12-28-2006, 11:57

Yes I did some of them already

BR

Luskao

jasmer · 01-01-2007, 14:45

v3x user code not read smart-clip and usb smart pls

systemworm · 01-01-2007, 15:25

Quote:

Originally Posted by jasmer

v3x user code not read smart-clip and usb smart pls

Because phone is not in default usb mode.It's in memory card mode so you can unlock it via flashing

flechazo · 01-01-2007, 23:01

Quote:

Originally Posted by nagval

V3x boot 0.6.8.3 is smart-clip can unlock it?
r252211ld_u_85.97.f63p

Try repair PDS and post result

ReGards .. Faisal

ExTrEmE99 · 01-02-2007, 04:39

If it doesnt work just flash the v3x with a *******pack/FUll flash and the phones user code will be erased.

chowdary · 01-02-2007, 10:08

Quote:

Originally Posted by jasmer

v3x user code not read smart-clip and usb smart pls

no need flashing
just use free toll called GOT tool(available in this forum just do the search)
connect the handset powered on without sim
go to unlock tab and reset your user code or security code to default
tested and works
br

systemworm · 01-02-2007, 15:06

Quote:

Originally Posted by chowdary

no need flashing
just use free toll called GOT tool(available in this forum just do the search)
connect the handset powered on without sim
go to unlock tab and reset your user code or security code to default
tested and works
br

Man you haven't read carefully here.Phone is not in modem mode.It's in memory card mode so you can't delete user code so easily

chowdary · 01-03-2007, 17:04

Quote:

Originally Posted by systemworm

Man you haven't read carefully here.Phone is not in modem mode.It's in memory card mode so you can't delete user code so easily

i read it very carefully and just done an L6 lock code changed and enabeled so u couldn't get into the device
so connected with pc, use Got and use reset user code and security code
SO ADVICE FOR U
FORGET MEMORY CARD MODE AND MODEM MODE(AS NO FLASHING INVOLVED)
JUST TRY IT YOURSELF AND THEN POST
NOTE!!! SMARTMOTO cant read any interface when usercode enabled so it wouldn't connect with the handset
br

luskao · 01-03-2007, 18:35

Chwdary my friend you are so blind. L6 has not transflash card meanwhile V3x has it. If the phone it's in data mode you can't do that. I could read interface in L7. Next time I will have the chance to unlock a LTE2 I will show you my friend. The problem appear only in Motorola 3G phones

The fact it's that V3x it's not the same as L6

BR

Luskao

systemworm · 01-03-2007, 20:36

Quote:

Originally Posted by chowdary

i read it very carefully and just done an L6 lock code changed and enabeled so u couldn't get into the device
so connected with pc, use Got and use reset user code and security code
SO ADVICE FOR U
FORGET MEMORY CARD MODE AND MODEM MODE(AS NO FLASHING INVOLVED)
JUST TRY IT YOURSELF AND THEN POST
NOTE!!! SMARTMOTO cant read any interface when usercode enabled so it wouldn't connect with the handset
br

As Luskao mentioned L6 has not transflash card so it has only modem usb options always enabled.So you are wrong

chowdary · 01-03-2007, 21:36

Quote:

Originally Posted by systemworm

As Luskao mentioned L6 has not transflash card so it has only modem usb options always enabled.So you are wrong

@systemworm
u might be right as i haven't tested any v3x, if i do then i'll let u know
br

chowdary · 01-04-2007, 01:23

@Lusako & @Systemworm
u are right about 3g motorolas
i just done some tests on 2g and 3g motorolas
tried on a c975 with lock code enabeled
in device manger it only detects as "motorola usb modem" so i wouldn't connect with any soft like rsd or p2keasy or got etc
connected without lock code enabeled detects as "usb composite device"
and can b detected with all above mentioned softwares
SO PLEASE ACCEPTMY APPOLOGY
NOTHING PERSONAL

BR

12-28-2006, 11:45	#1 (permalink)
nagval Freak Poster Join Date: Sep 2002 Location: ***a Spain Age: 47 Posts: 122 Member: 16021 Status: Offline** Thanks Meter: 1	V3x boot 0.6.8.3 V3x boot 0.6.8.3 is smart-clip can unlock it? r252211ld_u_85.97.f63p

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V3x BootLoader 0.6.8.2. How?	free1981Hell	Smart-Clip	3	10-28-2009 00:40
V3x - 0.6.8.3 BL need urgently.	Pecel	Ultima Box Light	8	01-27-2008 17:25
Problem unlock V3x boot 0.6.8.2	AirSac	Motorola P2k	9	11-19-2006 21:23
v3x downgrade boot 0.6.8.2 ?????	telkomb2	Smart-Clip	1	09-26-2006 14:33
e770 boot 0.6.8.1 unlocking	paklink	Smart-Clip	1	06-14-2006 08:06

12-28-2006, 11:56	#2 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ nagval, Please make a backup from this V3x, boot 6.8.3 and send it to support[at]smart-clip.com in few letters with rar parts up to 8Mb. Also please read all info from the phone and send it to me in Private Message or include it in letter. About the handset, that backup was made from: - Model - IMEI - User code - Security code - Operation band - Firmware - Flex version - Language pack To get full handset information, please connect powered ON phone to SmartMoto via Smart-Clip, open an INFORMATION tab and press SEARCH. Best Regards Smart-clip team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

12-28-2006, 11:57	#3 (permalink)
luskao Product Supporter Join Date: Sep 2004 Age: 39 Posts: 5,993 Member: 81703 Status: Offline Thanks Meter: 1,332	Yes I did some of them already BR Luskao

12-28-2006, 11:57	#4 (permalink)
luskao Product Supporter Join Date: Sep 2004 Age: 39 Posts: 5,993 Member: 81703 Status: Offline Thanks Meter: 1,332	Yes I did some of them already BR Luskao

01-01-2007, 14:45	#5 (permalink)
jasmer Junior Member Join Date: Oct 2005 Location: chandigarh Age: 43 Posts: 32 Member: 187477 Status: Offline Thanks Meter: 4	v3x user code not read smart-clip and usb smart pls

01-02-2007, 04:39	#8 (permalink)
ExTrEmE99 No Life Poster Join Date: Jan 2006 Location: US Posts: 787 Member: 216515 Status: Offline Thanks Meter: 4	If it doesnt work just flash the v3x with a *******pack/FUll flash and the phones user code will be erased.

01-03-2007, 18:35	#12 (permalink)
luskao Product Supporter Join Date: Sep 2004 Age: 39 Posts: 5,993 Member: 81703 Status: Offline Thanks Meter: 1,332	Chwdary my friend you are so blind. L6 has not transflash card meanwhile V3x has it. If the phone it's in data mode you can't do that. I could read interface in L7. Next time I will have the chance to unlock a LTE2 I will show you my friend. The problem appear only in Motorola 3G phones The fact it's that V3x it's not the same as L6 BR Luskao

01-04-2007, 01:23	#15 (permalink)
chowdary No Life Poster Join Date: Nov 2004 Posts: 1,980 Member: 91102 Status: Offline Thanks Meter: 34	@Lusako & @Systemworm u are right about 3g motorolas i just done some tests on 2g and 3g motorolas tried on a c975 with lock code enabeled in device manger it only detects as "motorola usb modem" so i wouldn't connect with any soft like rsd or p2keasy or got etc connected without lock code enabeled detects as "usb composite device" and can b detected with all above mentioned softwares SO PLEASE ACCEPTMY APPOLOGY NOTHING PERSONAL BR