V3Xv Variant of V3x Cant unlock it with TP

[rushwhq]

Hi All

Like the topic says. I cant unlock this variant. And Sc Team doesnt help.

Fails on sending boot.
The bootloader is 6.7.1. if i remember

Well
Regards
Rush

[Inovator]

post the log of unlock...
I did 3 of V3xv couple a days ago, just like that with SC

[ExTrEmE99]

The History unlocking with testpoint i only unlocked 3 v3xs since there not very common in the US but 2 of them were "3 network" and one was Vodafone none had any problems. Just make sure the testpoint is properly grounded and your touching the TP and do a search and make sure it finds it as a S Blank Rainbow POG?

Here is the old unlocking log 2/28/2006: (v3x Black "3 Network")

Searching for phone... found S Blank Rainbow POG, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 3.10
Reading bus width... OK
Reading flash id... Intel-28F256L18B (x2)
Phone group: E770,E1000,E1070, V3x,V975,V1050
Hardware IMEI: 35800xxxxxxxxxxx
Security area saved to "S Blank Rainbow POG 35800xxxxxxxxxxx.pds"
Unlocking phone... OK

[vali.rusu]

Originally Posted by ExTrEmE99

The History unlocking with testpoint i only unlocked 3 v3xs since there not very common in the US but 2 of them were "3 network" and one was Vodafone none had any problems. Just make sure the testpoint is properly grounded and your touching the TP and do a search and make sure it finds it as a S Blank Rainbow POG?

Here is the old unlocking log 2/28/2006: (v3x Black "3 Network")

Searching for phone... found S Blank Rainbow POG, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 3.10
Reading bus width... OK
Reading flash id... Intel-28F256L18B (x2)
Phone group: E770,E1000,E1070, V3x,V975,V1050
Hardware IMEI: 35800xxxxxxxxxxx
Security area saved to "S Blank Rainbow POG 35800xxxxxxxxxxx.pds"
Unlocking phone... OK

I have the same phone , i made the unlock procedure via testpoint , all ok , i mean unlock ok , but now the phone's LCD's doesnt work. It is posible to solve this problem by flashing the phone? Or where i am wrong? TP is clear clened very well, flex conector is ok.... any solution?
Best regards

[Mr.Tinkertrain]

@ vali.rusu,

If you have V3x with none working display, please check TP resistor. It suppose to be 33 Ohm.

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

[SM4RTBOY]

Originally Posted by rushwhq

Hi All

Like the topic says. I cant unlock this variant. And Sc Team doesnt help.

Fails on sending boot.
The bootloader is 6.7.1. if i remember

Well
Regards
Rush

Unlock it like V3x..via boot prepare and dont think twice !
TESTED nad retested...100%
enjoy
sm4rtboy

[Ryuken]

Originally Posted by Mr.Tinkertrain

@ vali.rusu,

If you have V3x with none working display, please check TP resistor. It suppose to be 33 Ohm.

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

If not 33ohm,it cant be unlocked?




Br

[Mr.Tinkertrain]

@ Ryuken,

If after unlock procedure display in V3x don't work there is a possibility that TP resistor damaged.

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

[S.Leo]

Have some a code for on the V3xv bcz I have some pesenal data the Set is demage and showing insert sim I try every sim on it and I need data urgant ..........

Help...

Thanks