v975 i need 850 band it`s possible

[laredmundotel]

I have a motorola v975 but don't have 850 band there are firmware for this.
thanks

[GSM_Support]

Frequency band switching

1. Connect handset to PC via Smart-Clip (phone > USB cable > Smart-Clip > LPT cable > PC).
2. Connect S-Card to PC USB port.
3. Connect power supply to Smart-Clip and power on the handset.
4. Launch SmartMoto.
5. Choose "Smart-Clip USB port" in phone connection field.
6. Press "Search". Software should perform the following steps:
   • SmartMoto detects S-Card;
   • SmartMoto detects Smart-Clip;
   • SmartMoto detects the handset and reads phone information.
7. Log to bookmark "Service".
8. Select a required value in "Operation band" field.
9. Press "Update band".
10. Disconnect the handset, after the process is completed.
11. The phone is set to the new operation band.

Note
Reset of the phone frequency is possible only if the handset hardware allows to do so. It might happen that the process of band changing was successfully completed but after switching the phone off and turning it back on, the band automatically changes to the default one. This means that phone’s hardware does not support customer settings.


Best Regards
GSMServer team