Is V975 supported for IMEI repair? - GSM-Forum

Millo_6 · 06-06-2007, 23:50

Hi SC Team......

Please let me know how can i repiar IMEI on a V975 Moto by Three Ita..

I do not see it in list of models......

mcandre · 06-07-2007, 07:53

Choose C975 phone model, apply IMEI patch and then press 'Restore IMEI'

JC_BY · 06-11-2007, 20:31

Quote:

Originally Posted by mcandre

Choose C975 phone model, apply IMEI patch and then press 'Restore IMEI'

it doesn't work

SmartMoto 2.23
S-Card: **Smart-Clip dongle, v 1.24, assigned Smart-Clip: **Europe, initializing... OK
Clip serial: **, version: 3.17, initializing... OK
Searching for phone... found Motorola Phone (V975), getting test interface... OK
Model V975
Firmware R26_U_83.38.49.01P
Switching to flash mode... OK [S Flash Rainbow POG]
Reading phone boot version... 5.F1
Reading flash id... Intel - 28F256L18B (x2)
Phone group: E770,E1000,E1070,V3x,V975,V1050
Hardware IMEI: **
Security area saved to "PDS for Motorola V975 *** (2).mbk"
Current phone does not correspond model selection

Millo_6 · 06-11-2007, 20:34

SOLVED!

Choose V3x model instead.....It works like a charm for me...

Another question for SC Team:

Is V1050 supported for IMEI repair?.....

Best regards

JC_BY · 06-11-2007, 20:55

Quote:

Originally Posted by Millo_6

SOLVED!

Choose V3x model instead.....It works like a charm for me...

Another question for SC Team:

Is V1050 supported for IMEI repair?.....

Best regards

SmartMoto 2.23
S-Card: ****Smart-Clip dongle, v 1.24, assigned Smart-Clip: **Europe, initializing... OK
Clip serial: ***, version: 3.17, initializing... OK
Searching for phone... found Motorola Phone (V975), getting test interface... OK
Model V975
Firmware R26_U_83.38.49.01P
Switching to flash mode... OK [S Flash Rainbow POG]
Reading phone boot version... 5.F1
Searching for phone... found S Flash Rainbow POG, getting test interface... interface not found
Switching to flash mode... OK
Phone is not in flash mode. Please enter flash mode before patching the phone.
This can be done by pressing 'Enter flash mode' button on 'Flash' tab (for old boots only!).
For newer boots, use 'Prepare phone' operation or TestPoint method.

It even doesn't start patching!

zmicier · 06-11-2007, 21:13

Quote:

Originally Posted by JC_BY

SmartMoto 2.23
S-Card: ****Smart-Clip dongle, v 1.24, assigned Smart-Clip: **Europe, initializing... OK
Clip serial: ***, version: 3.17, initializing... OK
Searching for phone... found Motorola Phone (V975), getting test interface... OK
Model V975
Firmware R26_U_83.38.49.01P
Switching to flash mode... OK [S Flash Rainbow POG]
Reading phone boot version... 5.F1
Searching for phone... found S Flash Rainbow POG, getting test interface... interface not found
Switching to flash mode... OK
Phone is not in flash mode. Please enter flash mode before patching the phone.
This can be done by pressing 'Enter flash mode' button on 'Flash' tab (for old boots only!).
For newer boots, use 'Prepare phone' operation or TestPoint method.

It even doesn't start patching!

n o b r a i n - n o g a i n

JC_BY · 06-11-2007, 21:42

SmartMoto 2.23
S-Card: ***Smart-Clip dongle, v 1.24, assigned Smart-Clip: **Europe, initializing... OK
Clip serial: **, version: 3.17, initializing... OK
Searching for phone... found Motorola Phone (V975), getting test interface... OK
Model V975
Firmware R26_U_83.38.49.01P
Switching to flash mode... OK [S Flash Rainbow POG]
Reading phone boot version... 5.F1
Reading flash id... Intel - 28F256L18B (x2)
Phone group: E770,E1000,E1070,V3x,V975,V1050
Hardware IMEI: ***
Security area saved to "PDS for Motorola V975 ****(3).mbk"
Writing flash section 2 of 2... 100% (30.5 Kb/sec)
Applying IMEI patch, please wait (up to 2 minutes!)... OK
IMEI patch successfull, set new IMEI with the "Write" button
Writing new IMEI ***... OK
Turning phone off... OK

Yes! I reconnected the phone and tried again and it was working!!!!

Millo_6 · 06-12-2007, 12:26

@zmicier

notrust-nogain

Millo_6 · 06-12-2007, 12:30

SCTeam please.......Is V1050 supported??

Mr.Tinkertrain · 06-12-2007, 12:38

@ Millo_6,

V1050 is not currently supported for Restore IMEI function.

Best Regards
Smart-clip team
www.smart-clip.com
www.GsmServer.com
www.boot-loader.com
www.smart-unlocker.com

LoveLess · 12-26-2009, 18:15

not exist v975 in restore imei section .. but E1070 is compatible with this device..

06-06-2007, 23:50	#1 (permalink)
Millo_6 No Life Poster Join Date: Feb 2004 Posts: 919 Member: 56121 Status: Offline Thanks Meter: 107	Is V975 supported for IMEI repair? Hi SC Team...... Please let me know how can i repiar IMEI on a V975 Moto by Three Ita.. I do not see it in list of models......

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V8 supported for imei repair?	meisam	Smart-Clip	3	12-16-2011 16:30
Will NSPRO support RPL files for IMEI REPAIR on NEW SAMSUNG?	Millo_6	NSPRO	0	01-06-2009 21:29
Which models supported for IMEI repair...?	GSM Road Runner	IQ-Box	0	03-29-2007 08:47
Is v600i supported for imei patch - what files do i use	shahzad9	SonyEricsson (USB-Smart)	7	01-28-2006 18:54

06-07-2007, 07:53	#2 (permalink)
mcandre No Life Poster Join Date: Mar 2006 Location: Central Europe Age: 39 Posts: 11,877 Member: 239548 Status: Offline Thanks Meter: 2,781	Choose C975 phone model, apply IMEI patch and then press 'Restore IMEI'

06-11-2007, 20:34	#4 (permalink)
Millo_6 No Life Poster Join Date: Feb 2004 Posts: 919 Member: 56121 Status: Offline Thanks Meter: 107	SOLVED! Choose V3x model instead.....It works like a charm for me... Another question for SC Team: Is V1050 supported for IMEI repair?..... Best regards

06-11-2007, 21:42	#7 (permalink)
JC_BY No Life Poster Join Date: Mar 2004 Location: BELARUS, Minsk Age: 44 Posts: 1,178 Member: 59319 Status: Offline Sonork: 100.1606948 Thanks Meter: 82	SmartMoto 2.23 S-Card: *Smart-Clip dongle, v 1.24, assigned Smart-Clip: Europe, initializing... OK Clip serial: , version: 3.17, initializing... OK Searching for phone... found Motorola Phone (V975), getting test interface... OK Model V975 Firmware R26_U_83.38.49.01P Switching to flash mode... OK [S Flash Rainbow POG] Reading phone boot version... 5.F1 Reading flash id... Intel - 28F256L18B (x2) Phone group: E770,E1000,E1070,V3x,V975,V1050 Hardware IMEI: * Security area saved to "PDS for Motorola V975 **(3).mbk" Writing flash section 2 of 2... 100% (30.5 Kb/sec) Applying IMEI patch, please wait (up to 2 minutes!)... OK IMEI patch successfull, set new IMEI with the "Write" button Writing new IMEI *... OK Turning phone off... OK Yes! I reconnected the phone and tried again and it was working!!!!

06-12-2007, 12:26	#8 (permalink)
Millo_6 No Life Poster Join Date: Feb 2004 Posts: 919 Member: 56121 Status: Offline Thanks Meter: 107	@zmicier notrust-nogain

06-12-2007, 12:30	#9 (permalink)
Millo_6 No Life Poster Join Date: Feb 2004 Posts: 919 Member: 56121 Status: Offline Thanks Meter: 107	SCTeam please.......Is V1050 supported??

06-12-2007, 12:38	#10 (permalink)
Mr.Tinkertrain No Life Poster Join Date: Feb 2006 Posts: 11,638 Member: 229997 Status: Offline Thanks Meter: 636	@ Millo_6, V1050 is not currently supported for Restore IMEI function. Best Regards Smart-clip team www.smart-clip.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com

12-26-2009, 18:15	#11 (permalink)
LoveLess No Life Poster Join Date: May 2005 Age: 40 Posts: 9,816 Member: 146708 Status: Offline Sonork: 100.108221 Thanks Meter: 1,603	not exist v975 in restore imei section .. but E1070 is compatible with this device..