V980M died when trying unlock via testpoint - GSM-Forum

sorin4tel · 12-19-2005, 12:49

This V980 has PCB of V975 !!!
I made testpoint like V975 (see link) http://www.smart-clip.com/testpoints/V975_V1050.php
When conected to smart-moto,->
Searching for phone... found S Blank Rainbow POG, getting test interface... interface not found
Switching to flash mode... OK
Tryed to "Unlock via Testpoint" end =>
Reading phone boot version... 3.10
Reading bus width... OK
Reading flash id... 0x0080-0x0010 (x2)
Phone group: A835,A845,A920,A925

Internal error 0001

End now Phone is DED!!!
I can' flash it, i can't do nothing with the phone. pls help somebody.
It give :
"Reading phone boot version... 3.10
Reading bus width... OK
Reading flash id... 0x0080-0x0010 (x2)
Phone group: A835,A845,A920,A925

Internal error 0001"
always

I tryed to flash with: V980M_R26_U_83[2].28.38.04.01P_lp0039_reflash.smf and with: V980M_R26_U_83[1].28.38.04.01P_lp0039_full_flash.smf
and it always give:
"Reading phone boot version... 3.10
Reading bus width... OK
Reading flash id... 0x0080-0x0010 (x2)
Phone group: A835,A845,A920,A925

Internal error 0001"

PHONE IS DED it power up not , not even in boot.

Please give some solutions quik.

Amir-SkillZ · 12-19-2005, 12:57

Ok u got V980m detects as Phone group: A835,A845,A920,A925

And Try to do PDS repair then Remaining .....Mean Full Flash Becoz u said
I can' flash it,
REPLY

sorin4tel · 12-19-2005, 14:14

I tryed to make "Repair PDS" But it gives :
"Reading phone boot version... 3.10
Reading bus width... OK
Reading flash id... 0x0080-0x0010 (x2)
Phone group: A835,A845,A920,A925

Internal error 0001"

everything i try to do it gives the same..."Reading phone boot version... 3.10
Reading bus width... OK
Reading flash id... 0x0080-0x0010 (x2)
Phone group: A835,A845,A920,A925

Internal error 0001"

The phone is dead, i cannot conect it to Smart-Moto without testpoint.
With testpoint,Smart-Moto find:
:Clip serial: 23xxxxxxx, version: 2.18, initializing... OK
Searching for phone... found S Blank Rainbow POG, getting test interface... interface not found
Switching to flash mode... OK"

This is all, the phone do not power up, not even in boot mode(with *&# pressed.)

12-19-2005, 12:49	#1 (permalink)
sorin4tel Junior Member Join Date: Jun 2005 Location: Romania Age: 31 Posts: 11 Member: 151973 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	V980M died when trying unlock via testpoint This V980 has PCB of V975 !!! I made testpoint like V975 (see link) http://www.smart-clip.com/testpoints/V975_V1050.php When conected to smart-moto,-> Searching for phone... found S Blank Rainbow POG, getting test interface... interface not found Switching to flash mode... OK Tryed to "Unlock via Testpoint" end => Reading phone boot version... 3.10 Reading bus width... OK Reading flash id... 0x0080-0x0010 (x2) Phone group: A835,A845,A920,A925 Internal error 0001 End now Phone is DED!!! I can' flash it, i can't do nothing with the phone. pls help somebody. It give : "Reading phone boot version... 3.10 Reading bus width... OK Reading flash id... 0x0080-0x0010 (x2) Phone group: A835,A845,A920,A925 Internal error 0001" always I tryed to flash with: V980M_R26_U_83[2].28.38.04.01P_lp0039_reflash.smf and with: V980M_R26_U_83[1].28.38.04.01P_lp0039_full_flash.smf and it always give: "Reading phone boot version... 3.10 Reading bus width... OK Reading flash id... 0x0080-0x0010 (x2) Phone group: A835,A845,A920,A925 Internal error 0001" PHONE IS DED it power up not , not even in boot. Please give some solutions quik.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
j132 tried unlock via logs in se tool-an error-help	zonetrichur	Sony Ericsson	0	03-24-2009 11:25
My V3 died when trying to unlock	hummy	P2k Series	5	05-16-2006 19:44
V360 unlock via testpoint	stevier	Smart-Clip	4	12-07-2005 11:07
z600 unlock via testpoint	trey	Cruiser Suite	20	07-18-2004 18:39
BE4 dies when trying to connect to network with certain simcards	jerrel	Alcatel & TCL Old Models	2	07-14-2003 06:50

12-19-2005, 12:57	#2 (permalink)
Amir-SkillZ Product Supporter Join Date: Nov 2004 Location: 29700A53 - BB PIN Posts: 6,762 Member: 91045 Status: Offline Sonork: 100.1577222 Thanks: 1,679 Thanked 8,696 Times in 1,207 Posts	Ok u got V980m detects as Phone group: A835,A845,A920,A925 And Try to do PDS repair then Remaining .....Mean Full Flash Becoz u said I can' flash it, REPLY

12-19-2005, 14:14	#3 (permalink)
sorin4tel Junior Member Join Date: Jun 2005 Location: Romania Age: 31 Posts: 11 Member: 151973 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	I tryed to make "Repair PDS" But it gives : "Reading phone boot version... 3.10 Reading bus width... OK Reading flash id... 0x0080-0x0010 (x2) Phone group: A835,A845,A920,A925 Internal error 0001" everything i try to do it gives the same..."Reading phone boot version... 3.10 Reading bus width... OK Reading flash id... 0x0080-0x0010 (x2) Phone group: A835,A845,A920,A925 Internal error 0001" The phone is dead, i cannot conect it to Smart-Moto without testpoint. With testpoint,Smart-Moto find: :Clip serial: 23xxxxxxx, version: 2.18, initializing... OK Searching for phone... found S Blank Rainbow POG, getting test interface... interface not found Switching to flash mode... OK" This is all, the phone do not power up, not even in boot mode(with *&# pressed.)