|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
|
Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source | Mark Forums Read |
| LinkBack | Thread Tools | Display Modes |
01-16-2008, 16:11 | #1 (permalink) |
Major Poster Join Date: Jan 2007 Location: Bahamas
Posts: 46
Member: 426005 Status: Offline Thanks Meter: 0 | w490 unlock i have successfully unlocked a w490 using smartclip and smart testpoint cable, phone is working fine except lcd has no backlight is there any solution to solve this problem thanks in advance br dagr8one |
01-16-2008, 16:41 | #2 (permalink) |
No Life Poster Join Date: Feb 2006
Posts: 11,638
Member: 229997 Status: Offline Thanks Meter: 636 | @ Dagr8one, Please check the mainboard of the phone, make sure that the TP area doesn't damaged and there is no short circuit at the PCB. Also, make sure that the LCD connected properly. Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com |
01-17-2008, 01:07 | #3 (permalink) |
Banned Join Date: Sep 2003 Location: Cambodia
Posts: 1,522
Member: 39069 Status: Offline Sonork: 100.1606677 Thanks Meter: 190 | W490, after prepaire phone testpoint error, now when power on have one blink on keypad. when i use scout to flash phone, flashing finish but still the and apear Firmware ERROR,NOT FOUND! Flex version ERROR,NOT FOUND! how to restore boot loader back ? BR |
01-17-2008, 01:26 | #4 (permalink) |
Banned Join Date: Sep 2003 Location: Cambodia
Posts: 1,522
Member: 39069 Status: Offline Sonork: 100.1606677 Thanks Meter: 190 | some log: SmartMoto 3.03 S-Card: 481******xSmart-Clip dongle, v 2.01, assigned Smart-Clip: 885****** Europe, initializing... OK Smart Adaptor: serial 19******x, firmware version 1.02 Clip serial: 885***xx, version: 4.01, initializing... OK Searching for phone... no phone found Searching for phone... found S Flash Neptune LTE2, getting test interface... interface not found Switching to flash mode... OK Reading phone boot version... C.50 Sending boot... OK Erasing flash memory OK Sending firmware OK Searching for phone... found S Flash Neptune LTE2 Switching to flash mode... OK Searching for phone... no phone found Searching for phone... found S Flash Neptune LTE2 Switching to flash mode... OK Searching for phone... no phone found Searching for phone... found S Flash Neptune LTE2 Switching to flash mode... OK Searching for phone... no phone found Searching for phone... found S Flash Neptune LTE2 Switching to flash mode... OK Searching for phone... found S Flash Neptune LTE2 Switching to flash mode... OK Reading phone boot version... C.50 ***if connect tp A to A Searching for phone... no phone found ***if connect both tp A to A & B to B Searching for phone... no phone found How can I do. This TP working with M702ig & V3re no problem |
01-17-2008, 08:25 | #5 (permalink) |
No Life Poster Join Date: Feb 2006
Posts: 11,638
Member: 229997 Status: Offline Thanks Meter: 636 | @ Vansy, Please double check the TP picture and try to run unlock procedure once again. SmartMoto will automatically detect temporary bak up file and suggest to redtore it. Also, please tell us what cable you are using. Where have yu purchased it? Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com |
01-17-2008, 14:06 | #7 (permalink) |
No Life Poster Join Date: Feb 2006
Posts: 11,638
Member: 229997 Status: Offline Thanks Meter: 636 | @ Vansy, W510/W490 and Foma M702iG schematic contains 2 TestPoints, A (primary) and B (secondary). In case if unlock fails using single TestPoint A, please perform the process, using both TestPoints simultaneously (connect needle A to TP A and needle B to TP B). In your case it looks like secondary TestPoint of the cable doesn't work properly. Best Regards Smart-clip team www.smart-clip.com www.scoutdongle.com www.GsmServer.com www.boot-loader.com www.smart-unlocker.com Last edited by Mr.Tinkertrain; 01-17-2008 at 14:11. |
Bookmarks |
Thread Tools | |
Display Modes | |
| |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
w490 unlock problem | mohmohsah | Smart-Clip | 20 | 03-13-2009 12:42 |
Problem with w490 unlock | manistar | Smart-Clip | 9 | 02-18-2008 14:58 |
Problem with w490 unlock | manistar | Smart-Clip | 0 | 02-05-2008 13:55 |
w490 unlocking | mjm_manuel | Motorola P2k | 1 | 11-02-2007 08:17 |
W490 unlocking successfully | Pufi164 | Smart-Clip | 2 | 10-21-2007 21:42 |
|