Cable for NEXUS - COM cable 1 Attachment(s) COM cable /for unibox - max232 interface/ for NEXUS NEC unlocker: |
Quote:
|
it's incorrect - You need to short VCC by using 10K resistor with VCC (Tested 100%) |
Cable is same as used with UNI-SERVER (tested and guaranteed to work 100%) Same as here: http://allgsm.co.uk/product_info.php...roducts_id=316 |
so it mean we can use normal GX30 cable (not Modified one) for 313..616..228..616v..338 with PBB nexus ????? |
Please help me, If i have USB cable can I use only short 8 and 10 without use any resistor? :D |
Regardign used cable Gx30 not modified cable are 100% OK but battery must be fully charged or you can use +5V from UniBOx since phone will be powered OFF but will not goes into Test Mode so not power on again...if you will use NEW battery or external power supply you can use normal GX30 cable |
this cable is working for me /unlocked one c616 v22/ yes it it Sharp GX30 COM cable. NEXUS not work with USB cable /which emulate COM port /obex/ e.g.5 !!! |
@yeldar uni-server uses 1K resistor and sharp uses 10K resistor which is which 'in so far as resistance is concerned they are not the same. 1k resistor will produce a much higher voltage in TX line. pls concur or maybe its also 10K and not 1K as advertised. |
Sharp GX30 cable for VygisToolBox work with Nec e228, using Nexus? |
OK, i change GX30 cable and all work with nexus |
Hello Any 1 have Nec Other Model Cracks |
All times are GMT +1. The time now is 23:41. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -