Can anyone tell me how to unlock e606 - GSM-Forum

ranjha · 05-31-2005, 10:47

i am looking forward to unlock my e606 but i came to know that there is no serial for that, but u can open it with software connecting via pc.
canany1 post this software.
thx in adv.

arwanis · 05-31-2005, 16:50

its a test point then u can unlock 606 with any nec software not 3g one such as red box furious etc

EURO-SERVICE · 05-31-2005, 16:55

Try to download in this place the software for unlock your phone:
http://www.unlockeasy.com/modules.ph...ownload&cid=74

skearon · 06-01-2005, 01:36

When making the cable, is all that is required is to connect TX, RX and GND from PC serial cable to points on E606 board?

Does power need to be provided?

ics_igrec_zet · 06-01-2005, 10:53

Yes connect wires from serial cable to test points, and try to use thin wires because after this you must assemble phone to provide power.
BR, xyz

skearon · 06-01-2005, 20:02

Quote:

Originally Posted by ics_igrec_zet

Yes connect wires from serial cable to test points, and try to use thin wires because after this you must assemble phone to provide power.
BR, xyz

Thanks for quick reply, I was puzzled as some pictures I have seen show a red and black wire also which I presumed was power

skearon · 06-01-2005, 20:16

Quote:

Originally Posted by ics_igrec_zet

Yes connect wires from serial cable to test points, and try to use thin wires because after this you must assemble phone to provide power.
BR, xyz

Some of the cables I have seen have a bulge in them, would there be a voltage convertor in here, or are you absolutely certain I can connect direct from PC serial port to 606 board

05-31-2005, 10:47	#1 (permalink)
ranjha Junior Member Join Date: May 2005 Age: 43 Posts: 1 Member: 149595 Status: Offline Thanks Meter: 0	Can anyone tell me how to unlock e606 i am looking forward to unlock my e606 but i came to know that there is no serial for that, but u can open it with software connecting via pc. canany1 post this software. thx in adv.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
can anyone tell me how to write IMEI to china mobile?	palav	Chinese Models & Cloned Phones	2	12-09-2009 14:08
Can anyone tell me how to use this NEC tool?	pwswin	SonyEricsson (USB-Smart)	2	01-08-2006 22:55
Can anyone tell me how to flash	blacks1967	Samsung Flashers, Software, Firmware.	2	08-25-2003 19:53

05-31-2005, 16:50	#2 (permalink)
arwanis Freak Poster Join Date: Dec 2004 Location: london uk Age: 46 Posts: 175 Member: 100185 Status: Offline Thanks Meter: 36	its a test point then u can unlock 606 with any nec software not 3g one such as red box furious etc

05-31-2005, 16:55	#3 (permalink)
EURO-SERVICE Junior Member Join Date: May 2005 Age: 46 Posts: 7 Member: 144600 Status: Offline Thanks Meter: 0	Try to download in this place the software for unlock your phone: http://www.unlockeasy.com/modules.ph...ownload&cid=74

06-01-2005, 01:36	#4 (permalink)
skearon Freak Poster Join Date: Apr 2005 Location: Ireland Age: 56 Posts: 175 Member: 136489 Status: Offline Thanks Meter: 0	When making the cable, is all that is required is to connect TX, RX and GND from PC serial cable to points on E606 board? Does power need to be provided?

06-01-2005, 10:53	#5 (permalink)
ics_igrec_zet No Life Poster Join Date: Feb 2004 Location: ROMANIA Age: 46 Posts: 861 Member: 55427 Status: Offline Thanks Meter: 7	Yes connect wires from serial cable to test points, and try to use thin wires because after this you must assemble phone to provide power. BR, xyz