Nec 341i Unlock By Redbox - GSM-Forum

Medusa Lancer · 06-26-2004, 00:23

HELLO FOR ALL UNLOCKERS
THE BEST NEWS THIS NIGHT FOR NEC

NEC 341I IS SUPPORTED AND NEW UPDATE IN REDBOX

GOOD WORK JULVIR AND HIS PROGRAMMER

BEST REGARDS

Mihnea · 06-26-2004, 22:09

I update the redbos and all is OK
I made a cable follow your pin-out I cheked all the conections,
and everything is OK...when I start the program Press the power
the phone the cursor of the program stops for one second but
nothing happend and red led from the
phone turn on...and the program says ERROR.
what is the difference between N341i normal end N341iNEW
and how can I see that...

Best regardes

Mihnea

PADERF · 06-27-2004, 18:35

@Mihnea
for N341i and N525i you must power on Phone first then plug cable and open soft for can see new COM port.. then Chose your EMULATED port and chose N341i than Read

-the diferebce betwen N341i and New341i the last one is from USA market AT&T provider

if you need any help just post in redboxe section

wearephones · 06-28-2004, 03:53

Can you send me the pinouts pelase

essojay · 06-28-2004, 08:49

Quote:

Originally Posted by wearephones

Can you send me the pinouts pelase

Get original NEC usb cable and instal the driver for it.. and in system devices, make sure the usb is emulated as com port, and then check for any starnge com port on your Com port choice on NEC redbox software.. and make sure phone is on. and then you can unlock..

bR

ringo · 07-03-2004, 14:13

from where driver for usb for nec341i?..i don't have original cable...
10x

eko · 07-03-2004, 14:28

You can get it in Red box support area

needi · 08-02-2004, 22:07

There is little confusion.....so do it like this ....swtich on phone....plug in usb cable....install drivers...run nec exe ....and there you must choose the com port from the new two ports...which is minor....lets say you have 6 and 7 so choose 6.And all is ok.

needi · 08-03-2004, 21:17

Well the phone i have unlocked with Redbox now have different problems.....like it doesnt goes on some times ...it freezes...it restarts....it saye PLease wait....and many more.

06-26-2004, 00:23	#1 (permalink)
Medusa Lancer Freak Poster Join Date: Feb 2004 Location: Tcp Ip Posts: 204 Member: 52360 Status: Offline Sonork: 100.1611553 Thanks Meter: 42	Nec 341i Unlock By Redbox HELLO FOR ALL UNLOCKERS THE BEST NEWS THIS NIGHT FOR NEC NEC 341I IS SUPPORTED AND NEW UPDATE IN REDBOX GOOD WORK JULVIR AND HIS PROGRAMMER BEST REGARDS

06-26-2004, 22:09	#2 (permalink)
Mihnea Freak Poster Join Date: Feb 2004 Location: Romania Age: 48 Posts: 272 Member: 52722 Status: Offline Thanks Meter: 18	Error I update the redbos and all is OK I made a cable follow your pin-out I cheked all the conections, and everything is OK...when I start the program Press the power the phone the cursor of the program stops for one second but nothing happend and red led from the phone turn on...and the program says ERROR. what is the difference between N341i normal end N341iNEW and how can I see that... Best regardes Mihnea

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nec e 606 unlock by Redbox	Unlocker AL	Redbox	19	03-02-2005 04:54
NEC 341i unlocking problem	shakeelajmal	Redbox	3	11-21-2004 17:47
LG G5400 on O2 Cannot be Unlocked By REDBOX !!!	UnlockingExperts	Redbox	2	11-02-2004 22:32
nec 223i dead by redbox	servtelgsm	Redbox	1	05-18-2004 11:06
Nec 341i Unlock	misiniku	NEC	2	10-19-2003 21:08

06-27-2004, 18:35	#3 (permalink)
PADERF No Life Poster Join Date: Sep 2000 Location: MAROC Posts: 528 Member: 2147 Status: Offline Sonork: 63246:Paderf Thanks Meter: 20	@Mihnea for N341i and N525i you must power on Phone first then plug cable and open soft for can see new COM port.. then Chose your EMULATED port and chose N341i than Read -the diferebce betwen N341i and New341i the last one is from USA market AT&T provider if you need any help just post in redboxe section

06-28-2004, 03:53	#4 (permalink)
wearephones Freak Poster Join Date: Oct 2003 Location: Bolton Age: 44 Posts: 491 Member: 41976 Status: Offline Thanks Meter: 33	Can you send me the pinouts pelase

07-03-2004, 14:13	#6 (permalink)
ringo No Life Poster Join Date: Jan 2001 Location: Bucharest, Romania Age: 48 Posts: 688 Member: 3180 Status: Offline Thanks Meter: 12	from where driver for usb for nec341i?..i don't have original cable... 10x

07-03-2004, 14:28	#7 (permalink)
eko No Life Poster Join Date: May 2003 Posts: 1,323 Member: 30098 Status: Offline Thanks Meter: 29	You can get it in Red box support area

08-02-2004, 22:07	#8 (permalink)
needi No Life Poster Join Date: Dec 2002 Location: Near phones Age: 46 Posts: 1,154 Member: 18303 Status: Offline Thanks Meter: 3	There is little confusion.....so do it like this ....swtich on phone....plug in usb cable....install drivers...run nec exe ....and there you must choose the com port from the new two ports...which is minor....lets say you have 6 and 7 so choose 6.And all is ok.

08-03-2004, 21:17	#9 (permalink)
needi No Life Poster Join Date: Dec 2002 Location: Near phones Age: 46 Posts: 1,154 Member: 18303 Status: Offline Thanks Meter: 3	Well the phone i have unlocked with Redbox now have different problems.....like it doesnt goes on some times ...it freezes...it restarts....it saye PLease wait....and many more.