03/04/2014 FuriousGold | PACK 6 |*OTSMART PeakTop Edition V1.0.0.468

[jotulua]

where can i download the correct driver please

Originally Posted by .:hack3r2k:.

Watch the movie bellow. You have shown way to install drivers:

[.:hack3r2k:.]

It's inside OTSmart_v1.0.0.476.rar archive from the support


Br

[mtb116]

I can see a lot of people are having that same problem with MTK driver. The problem is the phone stays connected for 1 or 2 seconds and gets disconnected. I follow the video instruction very closely but still can't get it to work. Is there any special trick to solve this?

Originally Posted by .:hack3r2k:.

It's inside OTSmart_v1.0.0.476.rar archive from the support


Br

[.:hack3r2k:.]

Originally Posted by mtb116

I can see a lot of people are having that same problem with MTK driver. The problem is the phone stays connected for 1 or 2 seconds and gets disconnected. I follow the video instruction very closely but still can't get it to work. Is there any special trick to solve this?

You must be sure preloader port is assigned on a port lower then 250 as number. And must be really sure drivers installed are the ones from usb_driver.rar

Br

[mtb116]

Umm, I've tried on 1 desktop and 1 laptop win XP, 1 laptop win 7. Ports on laptops are lower than 20. In control panel, when I first connect phone, I can see preloader port and then it disappears 1 second after. Drivers are ones from usb_driver.rar in support. I have run remove.bat and install.bat. I have tried usbdview to uninstall any old preloader drivers. What am I missing

Originally Posted by .:hack3r2k:.

You must be sure preloader port is assigned on a port lower then 250 as number. And must be really sure drivers installed are the ones from usb_driver.rar

Br

[.:hack3r2k:.]

Originally Posted by mtb116

Umm, I've tried on 1 desktop and 1 laptop win XP, 1 laptop win 7. Ports on laptops are lower than 20. In control panel, when I first connect phone, I can see preloader port and then it disappears 1 second after. Drivers are ones from usb_driver.rar in support. I have run remove.bat and install.bat. I have tried usbdview to uninstall any old preloader drivers. What am I missing

"be sure preloader port is assigned on a port lower then 250 as number." And i told you to contact on skype so i can help

Br

[mtb116]

I finally got it working. Thanks.

Using library Brom_DLL_v7.1347.5
Searching phone;
Phone detected (MediaTek PreLoader USB VCOM Port)
Preparing to start flash mode;
Connecting;
Downloading DA;
Initializing;
Rid: a186a741a87a798c444ec3d2e3eb1e3b
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (MediaTek DA USB VCOM Port)
TRYING TO OPEN COM88;
DEVICE INFO:
BB CHIP: MT6575_S01 [CB00, E201, 6575, FF]
HW_STORAGE_EMMC: 0x484A0190 0x64314734 0xA3098604 0x83A0809D [SIZE=0xE7600000]
IMEI1 [OTP 0001]: 013511-00-799731-6
IMEI2 [OTP 0001]: 000000-00-000000-0
PROVIDER: 5020A-2BVDAU1
USRDATA INFO: 0x4AF4C000 SIZE: 0x9C6B4000



Searching data;


Locked to: 505-03
code_cat_n: 05145239 enabled: yes tries: 99
code_cat_ns: 14254997 enabled: no tries: 10
code_cat_sp: 09705239 enabled: no tries: 10
code_cat_c: 42221619 enabled: no tries: 10
code_cat_sim: 06830819 enabled: no tries: 10
code_cat_ns_sp: 12231779 enabled: no tries: 5
code_cat_sim_c: 03602653 enabled: no tries: 5

Code reading finished; Remove battery and cable;

Time needed - 00:00:07

Originally Posted by .:hack3r2k:.

"be sure preloader port is assigned on a port lower then 250 as number." And i told you to contact on skype so i can help

Br

[MOVISIM]

HELP UNLOCK
A70
Using library Brom_DLL_v7.1347.5
Searching phone;
Phone detected (PreLoader USB VCOM Port)
Preparing to start flash mode;
Preparing to open COM250
Connecting;
Downloading DA;
Initializing;
ERROR: S_FT_ENABLE_DRAM_FAIL
ERROR: BOOT_PHONE;

[.:hack3r2k:.]

Originally Posted by MOVISIM

HELP UNLOCK
A70
Using library Brom_DLL_v7.1347.5
Searching phone;
Phone detected (PreLoader USB VCOM Port)
Preparing to start flash mode;
Preparing to open COM250
Connecting;
Downloading DA;
Initializing;
ERROR: S_FT_ENABLE_DRAM_FAIL
ERROR: BOOT_PHONE;

contact me on skype to check it

Br

[hanson2]

i have dead 4015D after OTsmart Flash..
and cannot flash another from support :

Preparing to start flash mode;
Preparing to open COM39
Connecting;
Downloading DA;
Initializing;
ERROR: S_FT_ENABLE_DRAM_FAIL
ERROR: BOOT_PHONE;


any sugestions?

[Celinf1]

same problem unlocking tmn a70

Using library Brom_DLL_v7.1413.5
Searching phone;
Phone detected (@oem43.inf,%mtk_preloader%;PreLoader USB VCOM Port)
Preparing to start flash mode;
Preparing to open COM7
Connecting;
Downloading DA;
Initializing;
ERROR: S_FT_ENABLE_DRAM_FAIL
ERROR: BOOT_PHONE;

[.:hack3r2k:.]

Originally Posted by Celinf1

same problem unlocking tmn a70

Using library Brom_DLL_v7.1413.5
Searching phone;
Phone detected (@oem43.inf,%mtk_preloader%;PreLoader USB VCOM Port)
Preparing to start flash mode;
Preparing to open COM7
Connecting;
Downloading DA;
Initializing;
ERROR: S_FT_ENABLE_DRAM_FAIL
ERROR: BOOT_PHONE;

means diff hw version. Contact on skype to support it

Br

[mkbachu]

Order no. 1226. Please advice on the state of the order.

[.:hack3r2k:.]

Originally Posted by mkbachu

Order no. 1226. Please advice on the state of the order.

Order is pending. All orders are going to be shipped once the Chinese holidays end

Br

[vickcar13]

hi, im facing the same problem.. i also tried the remove.bat install.bat USBdev and always the same error... showing the charging logo, its also in a lower port number!... trying to flash a different firmware, original its not that good... heres the log..

Using library Brom_DLL_v7.1413.5
Searching phone;
Phone detected (MediaTek PreLoader USB VCOM Port)
Preparing to start flash mode;
Preparing to open COM29
ERROR: Comport open failed !
ERROR: BOOT_PHONE;

waiting for your help mr Hacker2k