6030x with blocked counter when flashing ERROR: S_DA_DRAM_NOT_SUPPORT

[Boshko_Alfa]

6030x with blocked counter when flashing ERROR: S_DA_DRAM_NOT_SUPPORT now phone is dead.

Using library Brom_DLL_v7.1347.5
Searching phone;
Phone detected (MTK USB Port)
Preparing to start flash mode;
Connecting;
Downloading DA;
Initializing;
Rid: fc3e048d12154ce7d4e68f886c080590
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (DA USB VCOM Port)
TRYING TO OPEN COM19;
DEVICE INFO:
BB CHIP: MT6577_S00 [CA00, E100, 6577, 05]
HW_STORAGE_EMMC: 0x31000006 0xFFFFFF36 0x5C19FFFF 0xEB343949 [SIZE=0xE3020000]
PROVIDER: N/A
USRDATA INFO: 0x4AEEC000 SIZE: 0x98134000


Loading the file ...
Cfg done ...
ERROR: S_FT_FORMAT_FAIL
ERROR: S_DA_DRAM_NOT_SUPPORT

Time needed - 00:00:59

[.:hack3r2k:.]

Wrong firmware used . Must use other

Br

[Boshko_Alfa]

On alcatel idol 6030 can't see the PID :/

i think phone was from T-Mobile Macedonia and i use 2btbmk1, also i tried with other firmwares same story.

[.:hack3r2k:.]

Originally Posted by Boshko_Alfa

On alcatel idol 6030 can't see the PID :/

i think phone was from T-Mobile Macedonia and i use 2btbmk1, also i tried with other firmwares same story.

Simply open the phone and on back you will find the imei and pid. Normally wrong firmwares create such pb

Br

[Boshko_Alfa]

As i said it's alcatel idol. Can't read on hw pid and imei.

[.:hack3r2k:.]

Originally Posted by Boshko_Alfa

As i said it's alcatel idol. Can't read on hw pid and imei.

For sure it isnt 6030 because else the provider id would be shown on the soft

Br

[Boshko_Alfa]

maybe hw fault that corumpted model id? :/

[.:hack3r2k:.]

Originally Posted by Boshko_Alfa

maybe hw fault that corumpted model id? :/

Can be hw fault or simply wrong model chosen

Br