8050d Dead after flash - GSM-Forum

dariusz_21 · 12-15-2016, 13:22

Using library Brom_DLL_v7.1522.2
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (PreLoader USB VCOM Port (COM224))
Preparing to start flash mode;
Preparing to open COM224
Connecting;
Downloading DA;
Initializing;
Rid: 16d87164ef2245dbe5fd8c5176085c7d
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem85.inf,%mtk_sp_da%;DA USB VCOM Port)
TRYING TO OPEN COM225;
DEVICE INFO:
BB CHIP: MT6580_S00 [CA00, 00, 6580, FF]
HW_STORAGE_EMMC: 0x30000111 0x37473830 0x50A10030 0x29C2C640 [SIZE=0x1D2C00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 8050D-2AALWE1
USRDATA INFO: 0xB9800000 SIZE: 0x19400000

Loading the file ...
Cfg done ...
ERROR: S_NOT_ENOUGH_MEMORY

Time needed - 00:00:38

Log file saved to: LOG_15_12_2016_13_21_39.txt

**.:hack3r2k:.** · 12-15-2016, 16:24

On this log the flashing didnt even start. So how to be dead

simply remove batt and usb and reattach

Br

VasiliuS · 02-15-2017, 18:44

confirm that - dont flash 8050d correctly
with different firmwares - can upload few sections and breaks with ERROR: S_NOT_ENOUGH_MEMORY

Original flasher repair successful

nycu · 04-20-2017, 12:43

Quote:

Originally Posted by VasiliuS

confirm that - dont flash 8050d correctly
with different firmwares - can upload few sections and breaks with ERROR: S_NOT_ENOUGH_MEMORY

Original flasher repair successful

What is the original flasher and flash file?
Regards.

12-15-2016, 13:22	#1 (permalink)
dariusz_21 Insane Poster Join Date: Nov 2004 Age: 41 Posts: 69 Member: 92023 Status: Offline Thanks Meter: 5	8050d Dead after flash Using library Brom_DLL_v7.1522.2 Searching phone in normal mode; [connect the phone powered off to the usb cable] Phone detected (PreLoader USB VCOM Port (COM224)) Preparing to start flash mode; Preparing to open COM224 Connecting; Downloading DA; Initializing; Rid: 16d87164ef2245dbe5fd8c5176085c7d Requesting baudrate change; Done; USB SPEED: USB_HIGH_SPEED Switching to DA_HIGHSPEED_VCOM; Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86; If the detection fails, install manually the port from the device manager using usbvcom.inf; DA_HIGHSPEED_VCOM (@oem85.inf,%mtk_sp_da%;DA USB VCOM Port) TRYING TO OPEN COM225; DEVICE INFO: BB CHIP: MT6580_S00 [CA00, 00, 6580, FF] HW_STORAGE_EMMC: 0x30000111 0x37473830 0x50A10030 0x29C2C640 [SIZE=0x1D2C00000] IMEI1 [OTP 0000]: 000000-00-000000-0 IMEI2 [OTP 0000]: 000000-00-000000-0 PROVIDER: 8050D-2AALWE1 USRDATA INFO: 0xB9800000 SIZE: 0x19400000 Loading the file ... Cfg done ... ERROR: S_NOT_ENOUGH_MEMORY Time needed - 00:00:38 Log file saved to: LOG_15_12_2016_13_21_39.txt

12-15-2016, 16:24	#2 (permalink)
.:hack3r2k:. Product Manager Join Date: Aug 2002 Location: FuriouSTeaM Posts: 53,979 Member: 15022 Status: Offline Sonork: 100.53452 Thanks Meter: 61,568	On this log the flashing didnt even start. So how to be dead simply remove batt and usb and reattach Br

02-15-2017, 18:44	#3 (permalink)
VasiliuS Freak Poster Join Date: Dec 2002 Location: Ukraine Age: 42 Posts: 348 Member: 18665 Status: Offline Thanks Meter: 2	confirm that - dont flash 8050d correctly with different firmwares - can upload few sections and breaks with ERROR: S_NOT_ENOUGH_MEMORY Original flasher repair successful