8050d dead after flash [SOLVED] - GSM-Forum

Steve-1 · 11-08-2018, 10:55

8050d dead after flash with 8050D-2[X=A,B,C]ALAP1.
i have also 8050D-2[X=A,B,C,D]VDGH4 but not revive it

Quote:

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM6))
Preparing to start flash mode;
Preparing to open COM6
Connecting;
Downloading DA;
Initializing;
Rid: 6b07e652f155b2e7d929768cbc208b03
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6580 [CA00, 00, 6580, FF]
HW_STORAGE_EMMC: 0x46000115 0x4D32584E 0xC8B30142 0x057483D2 [SIZE=0x1D2880000]
IMEI1 [OTP 0001]: 354124-08-731090-0
IMEI2 [OTP 0001]: 354124-08-731091-8
PROVIDER: 8050D-2GALWEL-1
USRDATA INFO: 0xB9800000 SIZE: 0x114C80000

Loading the file ...
Cfg done ...
Formatting file system now...
Done;
Formatting SECCFG partition now...
Done;
Formatting FRP partition now...
Done;
Formatting NVDATA partition now...
Done;
Formatting METADATA partition now...
Done;
Downloading bootloader...
Done;
Downloading images...
Done;
Success;

Time needed - 00:04:49

**.:hack3r2k:.** · 11-08-2018, 11:42

Must download 8050D-2[X=G]ALWEL-1_1ACXL5X1.osp from support and flash that !

Br

Steve-1 · 11-08-2018, 11:48

Quote:

Originally Posted by .:hack3r2k:.

Must download 8050D-2[X=G]ALWEL-1_1ACXL5X1.osp from support and flash that !

Br

The problem my support expired

**.:hack3r2k:.** · 11-08-2018, 12:45

Take from https://mega.nz/#!lDRxTITa!eJaZpplMQ...RyiBbz4A5mJ1e4

Steve-1 · 11-08-2018, 21:32

this phone make me crazy

when i select YES, only detected with holding volume UP

Quote:

Searching phone in emergency mode;
[connect the phone powered off with volume down pressed to the usb cable]
Phone detected (MTK USB Port (COM132))
Preparing to start flash mode;
Preparing to open COM132
ERROR: Comport open failed !
ERROR: BOOT_PHONE;

**.:hack3r2k:.** · 11-09-2018, 09:10

before pressing yes you must remove usb cable and battery and reattach when the sw is starts searching for it ! it write clearly in teh mmessage box and you didnt do that !

Br

Steve-1 · 11-09-2018, 09:29

Quote:

Originally Posted by .:hack3r2k:.

before pressing yes you must remove usb cable and battery and reattach when the sw is starts searching for it ! it write clearly in teh mmessage box and you didnt do that !

Br

That's what I do exactly, i repaire same situations like this before, but this i dont knows where's the problem

, note that the phone was working good just has problem with WhatsApp recorder!
I see the comport still busy from the first connect , any way to flash in emergency mode in the first time directly without the message YES or NO

Steve-1 · 11-09-2018, 12:23

i think the problem is software not déconnect from comport after the first operation

Steve-1 · 11-09-2018, 19:18

i have this error with old version

Quote:

Searching phone in emergency mode;
[connect the phone powered off with volume down pressed to the usb cable]
Phone detected (MTK USB Port (COM132))
Preparing to start flash mode;
Preparing to open COM132
Connecting;
Downloading DA;
Initializing;
Rid: 6b07e652f155b2e7d929768cbc208b03
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem148.inf,%mtk_sp_da%;DA USB VCOM Port)
TRYING TO OPEN COM7;
DEVICE INFO:
BB CHIP: MT6580_S00 [CA00, 00, 6580, 05]
HW_STORAGE_EMMC: 0x46000115 0x4D32584E 0xC8B30142 0x057483D2 [SIZE=0x1D2880000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 8050D-2GALWEL-1
USRDATA INFO: 0xB9800000 SIZE: 0x19080000

Loading the file ...
ERROR: S_NOT_ENOUGH_MEMORY

Time needed - 00:00:24

Steve-1 · 11-11-2018, 20:39

Waiting any advice to revive this set pleas

**.:hack3r2k:.** · 11-12-2018, 08:13

I told you after pressinng YES you must deattach the usb cable and reattach tablet batterry and after when the sw start looking for it connect it to the usb with volume down pressed ! Contact me on skype if you dont manage !

Br

Steve-1 · 11-12-2018, 08:59

Quote:

Originally Posted by .:hack3r2k:.

I told you after pressinng YES you must deattach the usb cable and reattach tablet batterry and after when the sw start looking for it connect it to the usb with volume down pressed ! Contact me on skype if you dont manage !

Br

Yes that's what i do, the new software make the port busy from the first connect even when i disconnect usb and battery ! Any way i will contact you today to see the problem exactly
Thank you

**.:hack3r2k:.** · 11-12-2018, 11:03

Ok im waiting for you

Br

Steve-1 · 11-12-2018, 11:58

problem solved remotly with .:hack3r2k:.

Now phone revived, after many tools fail

Quote:

Searching phone in emergency mode;
[connect the phone powered off with volume down pressed to the usb cable]
Phone detected (MTK USB Port (COM132))
Preparing to start flash mode;
Preparing to open COM132
Connecting;
Downloading DA;
Initializing;
Rid: 6b07e652f155b2e7d929768cbc208b03
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem148.inf,%mtk_sp_da%;DA USB VCOM Port)
TRYING TO OPEN COM7;
DEVICE INFO:
BB CHIP: MT6580 [CA00, 00, 6580, 05]
HW_STORAGE_EMMC: 0x46000115 0x4D32584E 0xC8B30142 0x057483D2 [SIZE=0x1D2880000]
IMEI1 [OTP 0001]: 354124-08-731090-0
IMEI2 [OTP 0001]: 354124-08-731091-8
PROVIDER: 8050D-2GALWEL-1
USRDATA INFO: 0xB9800000 SIZE: 0x114C80000

Loading the file ...
Cfg done ...
Formatting file system now...
Done;
Formatting SECCFG partition now...
Done;
Formatting FRP partition now...
Done;
Formatting NVDATA partition now...
Done;
Formatting METADATA partition now...
Done;
Downloading bootloader...
Done;
Downloading images...
Done;
Success;

Time needed - 00:04:37

11-08-2018, 11:42	#2 (permalink)
.:hack3r2k:. Product Manager Join Date: Aug 2002 Location: FuriouSTeaM Posts: 53,978 Member: 15022 Status: Offline Sonork: 100.53452 Thanks Meter: 61,567	Must download 8050D-2[X=G]ALWEL-1_1ACXL5X1.osp from support and flash that ! Br

11-08-2018, 12:45	#4 (permalink)
.:hack3r2k:. Product Manager Join Date: Aug 2002 Location: FuriouSTeaM Posts: 53,978 Member: 15022 Status: Offline Sonork: 100.53452 Thanks Meter: 61,567	Take from https://mega.nz/#!lDRxTITa!eJaZpplMQ...RyiBbz4A5mJ1e4

11-09-2018, 09:10	#6 (permalink)
.:hack3r2k:. Product Manager Join Date: Aug 2002 Location: FuriouSTeaM Posts: 53,978 Member: 15022 Status: Offline Sonork: 100.53452 Thanks Meter: 61,567	before pressing yes you must remove usb cable and battery and reattach when the sw is starts searching for it ! it write clearly in teh mmessage box and you didnt do that ! Br

11-09-2018, 12:23	#8 (permalink)
Steve-1 No Life Poster Join Date: Dec 2015 Location: hossting Posts: 1,154 Member: 2501288 Status: Offline Thanks Meter: 328	i think the problem is software not déconnect from comport after the first operation

11-11-2018, 20:39	#10 (permalink)
Steve-1 No Life Poster Join Date: Dec 2015 Location: hossting Posts: 1,154 Member: 2501288 Status: Offline Thanks Meter: 328	Waiting any advice to revive this set pleas

11-12-2018, 08:13	#11 (permalink)
.:hack3r2k:. Product Manager Join Date: Aug 2002 Location: FuriouSTeaM Posts: 53,978 Member: 15022 Status: Offline Sonork: 100.53452 Thanks Meter: 61,567	I told you after pressinng YES you must deattach the usb cable and reattach tablet batterry and after when the sw start looking for it connect it to the usb with volume down pressed ! Contact me on skype if you dont manage ! Br

11-12-2018, 11:03	#13 (permalink)
.:hack3r2k:. Product Manager Join Date: Aug 2002 Location: FuriouSTeaM Posts: 53,978 Member: 15022 Status: Offline Sonork: 100.53452 Thanks Meter: 61,567	Ok im waiting for you Br