acatel ot-4034d after flash dead

[sajohaker]

acatel ot-4034d after flash dead

phone before flash it worked normally just had a virus aplication problem

support fw 4034D-2[X=A,B,C,D,E,J]ALE31.osp

phone 4034D-2AALE31

LOGS:

Using library Brom_DLL_v7.1522.2
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM9))
Preparing to start flash mode;
Preparing to open COM9
Connecting;
Downloading DA;
Initializing;
Rid: d345f328aa8348f2c4de09f5ebcdad66
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem159.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM11;
DEVICE INFO:
BB CHIP: MT6580_S00 [CA00, 00, 6580, FF]
HW_STORAGE_EMMC: 0x45000170 0x44453445 0x9D120134 0x5B74BF77 [SIZE=0xE2480000]
IMEI1 [OTP 0001]: 354442-08-591787-6
IMEI2 [OTP 0001]: 354442-08-591789-2
PROVIDER: 4034D-2AALE31
USRDATA INFO: 0x58800000 SIZE: 0x85C80000


Loading the file ...
Cfg done ...
Formatting file system now...
Done;
Formatting SECCFG partition now...
Done;
Formatting FRP partition now...
Done;
Formatting NVDATA partition now...
Done;
Formatting METADATA partition now...
Done;
Downloading bootloader...
Done;
Downloading images...
Done;
Success;

Time needed - 00:10:43

--------------------------------------------------------------------------------------------
I tried again , this is how it waits for hours.

Searching phone in emergency mode;
[connect the phone powered off with volume down pressed to the usb cable]
Phone detected (MTK USB Port (COM84))
Preparing to start flash mode;
Preparing to open COM84

-------------------------------------------------------------------------------------------

Searching phone in emergency mode;
[connect the phone powered off with volume down pressed to the usb cable]
Phone detected (MTK USB Port (COM84))
Preparing to start flash mode;
Preparing to open COM84
ERROR: Connection failed !
ERROR: BOOT_PHONE;

[sajohaker]

problem solved other tools..thanks

[.:hack3r2k:.]

You must keep pressed power on long time and also be sure theg phone was charged.


Br