Alcatel 4013d flashing? - GSM-Forum

hallo · 10-29-2015, 12:20

Using library Brom_DLL_v7.1522.2
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (PreLoader USB VCOM Port (COM202))
Preparing to start flash mode;
Preparing to open COM202
Connecting;
Downloading DA;
Initializing;
Rid: 0c62192035aaa45609e491801c341018
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (DA USB VCOM Port (COM203))
TRYING TO OPEN COM203;
DEVICE INFO:
BB CHIP: MT6572_S00 [CA00, 00, 6572, FF]
HW_STORAGE_EMMC: 0x46000115 0x4135324A 0xD84D0242 0xEF629556 [SIZE=0xE9880000]
IMEI1 [OTP 0001]: 3541xxxxxxxxxxxxx
IMEI2 [OTP 0001]: 354xxxxxxxxxxxxxx
PROVIDER: 4013D-2AALRU1
USRDATA INFO: 0x6E380000 SIZE: 0x7B500000

Loading the file ...
ERROR: S_NOT_ENOUGH_MEMORY

With OTSmart v1.0.0.935 everything goes just fine...pl's check OTSart v1.0.0.1076!

**.:hack3r2k:.** · 10-29-2015, 12:29

S_NOT_ENOUGH_MEMORY. Means not enough free space on the directory. Simply clean it or move the flash file to an enough large partition.

Br

hallo · 10-29-2015, 12:31

With OTSmart v1.0.0.935 everything goes just fine...pl's check OTSart v1.0.0.1076! Ithink problem is in Brom_DLL some how..

Using library Brom_DLL_v7.1413.5
Searching phone;
Phone detected (PreLoader USB VCOM Port (COM202))
Preparing to start flash mode;
Preparing to open COM202
Connecting;
Downloading DA;
Initializing;
Rid: 0c62192035aaa45609e491801c341018
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (DA USB VCOM Port (COM203))
TRYING TO OPEN COM203;
DEVICE INFO:
BB CHIP: MT6572_S00 [CA01, 00, 6572, FF]
HW_STORAGE_EMMC: 0x46000115 0x4135324A 0xD84D0242 0xEF629556 [SIZE=0xE9880000]
IMEI1 [OTP 0001]: 354162xxxxxxxxxxxxxxxx
IMEI2 [OTP 0001]: 354162xxxxxxxxxxxxxxxx
USRDATA INFO: 0x6E380000 SIZE: 0x7B500000

Loading the file ...
Cfg done ...
Formatting file system now...
Done;
Downloading bootloader...
Done;
Downloading images...
Done;
Success;

Time needed - 00:04:25

**.:hack3r2k:.** · 10-30-2015, 12:07

Theres no error. I checked and works just fine. As i told you that error means it wasnt enough space at the time you tried. Simply try again. If that error happens again can contac tme over skype and i will check what is wrong on your pc.

Br

hallo · 10-30-2015, 12:11

Never mined....I menage to flash these phone with older EXE ...just for fun tried again with latest EXE and again unsuccessful...
Cheers.

**.:hack3r2k:.** · 10-30-2015, 12:30

Quote:

Originally Posted by hallo

Never mined....I menage to flash these phone with older EXE ...just for fun tried again with latest EXE and again unsuccessful...
Cheers.

Just for fun, read you PM and do what i told. Also which fw file you use ?

Br

patentasre · 04-05-2016, 15:47

Hello.same problem.otsmart with lg x150 flash firmware from support error: S_not_enough_memory.

10-29-2015, 12:20	#1 (permalink)
hallo No Life Poster Join Date: Feb 2003 Location: TelServisHalo,Loznica, Serbia Age: 53 Posts: 1,386 Member: 21365 Status: Offline Thanks Meter: 92	Alcatel 4013d flashing? Using library Brom_DLL_v7.1522.2 Searching phone in normal mode; [connect the phone powered off to the usb cable] Phone detected (PreLoader USB VCOM Port (COM202)) Preparing to start flash mode; Preparing to open COM202 Connecting; Downloading DA; Initializing; Rid: 0c62192035aaa45609e491801c341018 Requesting baudrate change; Done; USB SPEED: USB_HIGH_SPEED Switching to DA_HIGHSPEED_VCOM; Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86; If the detection fails, install manually the port from the device manager using usbvcom.inf; DA_HIGHSPEED_VCOM (DA USB VCOM Port (COM203)) TRYING TO OPEN COM203; DEVICE INFO: BB CHIP: MT6572_S00 [CA00, 00, 6572, FF] HW_STORAGE_EMMC: 0x46000115 0x4135324A 0xD84D0242 0xEF629556 [SIZE=0xE9880000] IMEI1 [OTP 0001]: 3541xxxxxxxxxxxxx IMEI2 [OTP 0001]: 354xxxxxxxxxxxxxx PROVIDER: 4013D-2AALRU1 USRDATA INFO: 0x6E380000 SIZE: 0x7B500000 Loading the file ... ERROR: S_NOT_ENOUGH_MEMORY With OTSmart v1.0.0.935 everything goes just fine...pl's check OTSart v1.0.0.1076! Last edited by hallo; 10-29-2015 at 12:27.

04-05-2016, 15:47	#7 (permalink)
patentasre Major Poster Join Date: Jun 2006 Location: greece Posts: 41 Member: 300055 Status: Offline Sonork: 100.1620508 Thanks Meter: 0	Lg x150 error: S_not_enough_memory Hello.same problem.otsmart with lg x150 flash firmware from support error: S_not_enough_memory.

10-29-2015, 12:29	#2 (permalink)
.:hack3r2k:. Product Manager Join Date: Aug 2002 Location: FuriouSTeaM Posts: 53,978 Member: 15022 Status: Offline Sonork: 100.53452 Thanks Meter: 61,567	S_NOT_ENOUGH_MEMORY. Means not enough free space on the directory. Simply clean it or move the flash file to an enough large partition. Br

10-29-2015, 12:31	#3 (permalink)
hallo No Life Poster Join Date: Feb 2003 Location: TelServisHalo,Loznica, Serbia Age: 53 Posts: 1,386 Member: 21365 Status: Offline Thanks Meter: 92	With OTSmart v1.0.0.935 everything goes just fine...pl's check OTSart v1.0.0.1076! Ithink problem is in Brom_DLL some how.. Using library Brom_DLL_v7.1413.5 Searching phone; Phone detected (PreLoader USB VCOM Port (COM202)) Preparing to start flash mode; Preparing to open COM202 Connecting; Downloading DA; Initializing; Rid: 0c62192035aaa45609e491801c341018 Requesting baudrate change; Done; USB SPEED: USB_HIGH_SPEED Switching to DA_HIGHSPEED_VCOM; Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86; If the detection fails, install manually the port from the device manager using usbvcom.inf; DA_HIGHSPEED_VCOM (DA USB VCOM Port (COM203)) TRYING TO OPEN COM203; DEVICE INFO: BB CHIP: MT6572_S00 [CA01, 00, 6572, FF] HW_STORAGE_EMMC: 0x46000115 0x4135324A 0xD84D0242 0xEF629556 [SIZE=0xE9880000] IMEI1 [OTP 0001]: 354162xxxxxxxxxxxxxxxx IMEI2 [OTP 0001]: 354162xxxxxxxxxxxxxxxx USRDATA INFO: 0x6E380000 SIZE: 0x7B500000 Loading the file ... Cfg done ... Formatting file system now... Done; Downloading bootloader... Done; Downloading images... Done; Success; Time needed - 00:04:25

10-30-2015, 12:07	#4 (permalink)
.:hack3r2k:. Product Manager Join Date: Aug 2002 Location: FuriouSTeaM Posts: 53,978 Member: 15022 Status: Offline Sonork: 100.53452 Thanks Meter: 61,567	Theres no error. I checked and works just fine. As i told you that error means it wasnt enough space at the time you tried. Simply try again. If that error happens again can contac tme over skype and i will check what is wrong on your pc. Br

10-30-2015, 12:11	#5 (permalink)
hallo No Life Poster Join Date: Feb 2003 Location: TelServisHalo,Loznica, Serbia Age: 53 Posts: 1,386 Member: 21365 Status: Offline Thanks Meter: 92	Never mined....I menage to flash these phone with older EXE ...just for fun tried again with latest EXE and again unsuccessful... Cheers.