Alcatel 4033x-2AMPBG1 problem

[Nikola Jolov]

Using library Brom_DLL_v7.1347.5
Searching phone;
Phone detected (MediaTek PreLoader USB VCOM Port)
Preparing to start flash mode;
Preparing to open COM56
Connecting;
Downloading DA;
Initializing;
Rid: a0a5385f0ab8804a23cad434db3f0e83
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (MediaTek DA USB VCOM Port)
TRYING TO OPEN COM55;
DEVICE INFO:
BB CHIP: MT6572_S00 [CA01, 00, 6572, FF]
HW_STORAGE_EMMC: 0x4E000115 0x4D5A5835 0xF07B0142 0x7D7153D8 [SIZE=0xE9880000]
IMEI1 [OTP 0001]: 862149-02-609042-5
IMEI2 [OTP 0001]: 000000-00-000000-0
PROVIDER: 4033X-2AMPBG1
USRDATA INFO: 0x5D680000 SIZE: 0x8C200000


Loading the file ...
Cfg done ...
Formatting file system now...
Done;
Downloading bootloader...
Done;
Downloading images...
Done;
Success;

Time needed - 00:07:21



Before flash the phone was blinking, after that - no power on. I use file 4033X-2[X=A,D,E,F]TNBG1.osp from support. What i do wrong ? This is the log of first flashing after that i download the last version of OTSmart 1.0.0.777 from support and flash phone again - still nothing.

[Nikola Jolov]

After flashing with 4033X-2[X=A,D,E,F]TZTN1.osp from support - again blinking


Using library Brom_DLL_v7.1413.5
Searching phone;
Phone detected (MTK USB Port)
Preparing to start flash mode;
Preparing to open COM44
Connecting;
Downloading DA;
Initializing;
Rid: a0a5385f0ab8804a23cad434db3f0e83
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (MediaTek DA USB VCOM Port)
TRYING TO OPEN COM55;
DEVICE INFO:
BB CHIP: MT6572_S00 [CA01, 00, 6572, 05]
HW_STORAGE_EMMC: 0x4E000115 0x4D5A5835 0xF07B0142 0x7D7153D8 [SIZE=0xE9880000]
IMEI1 [OTP 0001]: 862149-02-609042-5
IMEI2 [OTP 0001]: 000000-00-000000-0
PROVIDER: 4033X-2AMPBG1
USRDATA INFO: 0x5D680000 SIZE: 0x8C200000


Loading the file ...
Cfg done ...
Formatting file system now...
Done;
Downloading bootloader...
Done;
Downloading images...
Done;
Success;

Time needed - 00:04:30

[.:hack3r2k:.]

Originally Posted by Nikola Jolov

After flashing with 4033X-2[X=A,D,E,F]TZTN1.osp from support - again blinking


Using library Brom_DLL_v7.1413.5
Searching phone;
Phone detected (MTK USB Port)
Preparing to start flash mode;
Preparing to open COM44
Connecting;
Downloading DA;
Initializing;
Rid: a0a5385f0ab8804a23cad434db3f0e83
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (MediaTek DA USB VCOM Port)
TRYING TO OPEN COM55;
DEVICE INFO:
BB CHIP: MT6572_S00 [CA01, 00, 6572, 05]
HW_STORAGE_EMMC: 0x4E000115 0x4D5A5835 0xF07B0142 0x7D7153D8 [SIZE=0xE9880000]
IMEI1 [OTP 0001]: 862149-02-609042-5
IMEI2 [OTP 0001]: 000000-00-000000-0
PROVIDER: 4033X-2AMPBG1
USRDATA INFO: 0x5D680000 SIZE: 0x8C200000


Loading the file ...
Cfg done ...
Formatting file system now...
Done;
Downloading bootloader...
Done;
Downloading images...
Done;
Success;

Time needed - 00:04:30

Will add tomorrow to the support 4033X-2AMPBG1 so you can try

[Nikola Jolov]

.:hack3r2k:. still nothing on support

[.:hack3r2k:.]

Originally Posted by Nikola Jolov

.:hack3r2k:. still nothing on support

Sorry, i forgot about. Will do it first time in the morning

Br

[.:hack3r2k:.]

4033X-2[X=A]MPBG1.osp added to the support

Br

[Nikola Jolov]

In my phone have a hardware problem. Thanks again.