Alcatel 5045X unlock PIN error ? - GSM-Forum

Svetli · 02-22-2017, 11:46

Hi.
I have one 5045X that want PIN code. I try to read/reset PIN but get error:

Code:

Using library Brom_DLL_v7.1522.2
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (PreLoader USB VCOM Port (COM9))
Preparing to start flash mode;
Preparing to open COM9
Connecting;
Downloading DA;
Initializing;
Rid: 9533dde3197889199762723d56c9f57c
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver\x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (DA USB VCOM Port)
TRYING TO OPEN COM39;
DEVICE INFO:
BB CHIP: MT6735M_S00 [CA00, 00, 335, FF]
HW_STORAGE_EMMC: 0x484A0190 0x65314738 0x88590705 0x67B35F0D  [SIZE=0x1D2C00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 5045X-2FMPBG1
USRDATA INFO: 0xB7800000 SIZE: 0x1B400000


ERROR: MOUNT FAILED;

Time needed - 00:00:00

Log file saved to: LOG_22_02_2017_12_39_39.txt

how to remove PIN code ?

**.:hack3r2k:.** · 02-22-2017, 14:09

Make a flash read, upload it on mediafire.com and provide the link pls. You used v1550 ?!

Br

Svetli · 02-22-2017, 14:21

first LOG is from OTSmart_v1.0.0.1536
this LOG is from OTSmart_v1.0.0.1550

Code:

Using library Brom_DLL_v7.1522.2
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (PreLoader USB VCOM Port (COM9))
Preparing to start flash mode;
Preparing to open COM9
Connecting;
Downloading DA;
Initializing;
Rid: 9533dde3197889199762723d56c9f57c
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver\x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (DA USB VCOM Port)
TRYING TO OPEN COM39;
DEVICE INFO:
BB CHIP: MT6735M_S00 [CA00, 00, 335, FF]
HW_STORAGE_EMMC: 0x484A0190 0x65314738 0x88590705 0x67B35F0D  [SIZE=0x1D2C00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 5045X-2FMPBG1
USRDATA INFO: 0xB7800000 SIZE: 0x1B400000


ERROR: MOUNT FAILED;

Time needed - 00:00:00

Log file saved to: LOG_22_02_2017_15_20_25.txt

**.:hack3r2k:.** · 02-23-2017, 09:42

Quote:

Originally Posted by Svetli

first LOG is from OTSmart_v1.0.0.1536
this LOG is from OTSmart_v1.0.0.1550

Code:

Using library Brom_DLL_v7.1522.2
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (PreLoader USB VCOM Port (COM9))
Preparing to start flash mode;
Preparing to open COM9
Connecting;
Downloading DA;
Initializing;
Rid: 9533dde3197889199762723d56c9f57c
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver\x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (DA USB VCOM Port)
TRYING TO OPEN COM39;
DEVICE INFO:
BB CHIP: MT6735M_S00 [CA00, 00, 335, FF]
HW_STORAGE_EMMC: 0x484A0190 0x65314738 0x88590705 0x67B35F0D  [SIZE=0x1D2C00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 5045X-2FMPBG1
USRDATA INFO: 0xB7800000 SIZE: 0x1B400000


ERROR: MOUNT FAILED;

Time needed - 00:00:00

Log file saved to: LOG_22_02_2017_15_20_25.txt

Make a flash read, upload it on mediafire.com and provide the link pls.

Br

Svetli · 02-23-2017, 10:04

I make full backup. But unable to load it in mediafire. I try 3 times and get error from server.

**.:hack3r2k:.** · 02-23-2017, 13:42

Quote:

Originally Posted by Svetli

I make full backup. But unable to load it in mediafire. I try 3 times and get error from server.

Then mega.nz, 4shared or any other similar site !?

Br

Svetli · 02-23-2017, 14:28

https://forum.gsmhosting.com/vbb/****************************/?idrp4ldmqq0o6fq

PIN code is 0000
not locked to operator

**.:hack3r2k:.** · 02-24-2017, 10:16

Quote:

Originally Posted by Svetli

https://forum.gsmhosting.com/vbb/****************************/?idrp4ldmqq0o6fq

PIN code is 0000
not locked to operator

I dont understand. Problem fixed or not !?

Br

Svetli · 02-24-2017, 10:26

Quote:

Originally Posted by .:hack3r2k:.

I dont understand. Problem fixed or not !?

Br

Problem is fixed with other tool.
But check what is the problem for future with:

Code:

ERROR: MOUNT FAILED;

02-22-2017, 14:09	#2 (permalink)
.:hack3r2k:. Product Manager Join Date: Aug 2002 Location: FuriouSTeaM Posts: 53,977 Member: 15022 Status: Offline Sonork: 100.53452 Thanks Meter: 61,567	Make a flash read, upload it on mediafire.com and provide the link pls. You used v1550 ?! Br

02-23-2017, 10:04	#5 (permalink)
Svetli No Life Poster Join Date: Apr 2000 Location: Bulgaria Kyustendil Age: 47 Posts: 1,110 Member: 1191 Status: Offline Thanks Meter: 128	I make full backup. But unable to load it in mediafire. I try 3 times and get error from server.

02-23-2017, 14:28	#7 (permalink)
Svetli No Life Poster Join Date: Apr 2000 Location: Bulgaria Kyustendil Age: 47 Posts: 1,110 Member: 1191 Status: Offline Thanks Meter: 128	https://forum.gsmhosting.com/vbb/****************************/?idrp4ldmqq0o6fq PIN code is 0000 not locked to operator