ALCATEL OT mini 708

[ramoon20]

Hi furious team.


I have ALCATEL OT mini 708 for unlock the problem is my phone ID did not existe inbackup securityfile
Phone info

alcatel ot mini 708

imei : 353472041209713

ID: 708X-2ATLES2

here is log





REGARDS

[Eason_MildFire]

Originally Posted by ramoon20

Hi furious team.


I have ALCATEL OT mini 708 for unlock the problem is my phone ID did not existe inbackup securityfile
Phone info

alcatel ot mini 708

imei : 353472041209713

ID: 708X-2ATLES2

here is log





REGARDS

Hi,
If you already have the 708X-2ATLES1 backup secure file in your PC, please select the work mode as "Load security file from archive". You can use it for your provider ID, 708X-2ATLES2, last digit difference doesn't impact your job.
If you try the phone connection for reading secure information, you should select a right COM port. Error 1924 means "change baudrate fail", as according to your screen snapshot, you select the COM1 which is Windows OS reserved.

B.R.
Eason

[ramoon20]

Originally Posted by Eason_MildFire

Hi,
If you already have the 708X-2ATLES1 backup secure file in your PC, please select the work mode as "Load security file from archive". You can use it for your provider ID, 708X-2ATLES2, last digit difference doesn't impact your job.
If you try the phone connection for reading secure information, you should select a right COM port. Error 1924 means "change baudrate fail", as according to your screen snapshot, you select the COM1 which is Windows OS reserved.

B.R.
Eason

Thanka frend for your reply.


I try as u say but wrong nck also I select jaf as interface and solder wires on mother browds pinout and give error 4086

Here is log



ENJOY

[.:hack3r2k:.]

Originally Posted by ramoon20

Thanka frend for your reply.


I try as u say but wrong nck also I select jaf as interface and solder wires on mother browds pinout and give error 4086

Here is log



ENJOY

Wrong nck means phone was altered by other tool. Do security rebuild with our tool for direct unlock

Br

[Eason_MildFire]

Originally Posted by ramoon20

Thanka frend for your reply.


I try as u say but wrong nck also I select jaf as interface and solder wires on mother browds pinout and give error 4086

Here is log



ENJOY

Hi,
We don't promise the backup secure file is correct as they are shared by users not us. If the NCK is wrong, maybe the backup secure file is incorrect, or your handset's real secure config conflict with its provider ID what you can see.
Suggest you still try the real handset connection as the work mode. But again, according to your snapshot, you still use the wrong COM port. COM1 is always reserved by Windows OS. You should choose the right one for work. Error 4086 means download DA file to handset failed.

B.R.
Eason

[ramoon20]

Hi to all.


Problem sloved by poooooooooooooooor and ship dongle mxkey


Becose I pay pack8 and usally work with FG I forgot that mxkey support many phone model

[.:hack3r2k:.]

Originally Posted by ramoon20

Hi to all.


Problem sloved by poooooooooooooooor and ship dongle mxkey


Becose I pay pack8 and usally work with FG I forgot that mxkey support many phone model

If your lazy not our fault. Can read Eason reply.

Br

[Eason_MildFire]

Originally Posted by ramoon20

Hi to all.


Problem sloved by poooooooooooooooor and ship dongle mxkey


Becose I pay pack8 and usally work with FG I forgot that mxkey support many phone model

Hi,
To avoid any confusion, I just made a test by myself.
All work correctly without problem.
I don't understand how and what you did.
You can refer my screen snapshot as below if you want.
https://www.rapidshare.com/files/361...e_snapshot.JPG

And thanks for your report, such m*key result is wrong
For such provider ID (708X-2XTLES2), only NCK is available, no any other unlock codes are needed.
Yes, its NCK value(0222102245) is correct, you can use it to unlock your handset network lock. But please take care that the SPCK value is absolute dummy.
Hope you can be always lucky enough to get such partial correct result from other solution.

B.R.
Eason