Blaupunkt SL04 FRP

[csotika]

Is there any way in the future for frp reset this MT6580b secured phone?

[.:hack3r2k:.]

Probably yes. Contact me over skype to make some tests

Br

[csotika]

Now, its work in the new Otsmart module.

Must hold Volume - when connect.

Thx to Mr. .:hack3r2k:.

Using library Brom_DLL_v7.1733.4
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM41))
Preparing to start flash mode;
Preparing to open COM41
Connecting;
Downloading DA;
Initializing;
Rid: 5ebea23597cb108d2a6bb0c8a6f9fd58
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem22.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM199;
DEVICE INFO:
BB CHIP: MT6580 [CA00, 00, 6580, 05]
HW_STORAGE_EMMC: 0x484A0190 0x61344738 0xF70AA532 0xAB4435B4 [SIZE=0x1D2C00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xB1000000 SIZE: 0x11FF80000


Factory Reset Protection successfully removed !

[ernestico911]

not unlocked, why???????????????????

Using library Brom_DLL_v7.1733.4
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM14))
Preparing to start flash mode;
Preparing to open COM14
Connecting;
Downloading DA;
Initializing;
Rid: 3524ef9e58d5ddd89710569b24c23b3f
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem76.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM56;
DEVICE INFO:
BB CHIP: MT6580 [CA00, 00, 6580, 05]
HW_STORAGE_EMMC: 0x484A0190 0x61344738 0x980FA532 0x79A47FA8 [SIZE=0x1D2C00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xB1000000 SIZE: 0x11FF80000



Searching data;
File not found;
ST33A004
File not found;
File not found;
File not found;
File not found;
File not found;
ERROR: EXT4_SIMLOCK_REMOVE failed;

Time needed - 00:00:01

Log file saved to: LOG_12_09_2018_13_11_22.txt

[ernestico911]

i did it with mtk code reader

Searching phone;
Phone detected (@oem76.inf,%vcom_preloader%;MediaTek PreLoader USB VCOM (Android))
Preparing to start meta mode;
Searching for debug port; (be sure drivers from support were installed)
Debug Port found on MediaTek USB VCOM (Android) (COM172);
Preparing to connect meta mode;
Meta mode entered;
Baseband Chip: MT6580, E01
Sw version: MOLY.WR8.W1449.MD.WG.MP.V111.P2
Hw Version: ZECHIN6580_WE_N_HSPA_HW
Reading phone info;
IMEI: 355480-09-XXXXXX-X
Reading simlock info;


Locked to: 460-01
code_cat_n: 12345678 enabled: yes tries: 4
code_cat_ns: 56781234 enabled: no tries: 5
code_cat_sp: 11112222 enabled: no tries: 5
code_cat_c: 33334444 enabled: no tries: 5
code_cat_sim: 55556666 enabled: no tries: 5
code_cat_ns_sp: 77778888 enabled: no tries: 5
code_cat_sim_c: 99990000 enabled: no tries: 5

Time needed - 00:01:18

Log file saved to: LOG_12_09_2018_13_16_11.txt