Blu D140T dead after flash

[Yaio]

Blu D140t dead after flash heere the log

Using library Brom_DLL_v7.1413.5
Searching phone;
Phone detected (USB Single Port)
Preparing to start flash mode;
Preparing to open COM14
Connecting;
Downloading DA;
Initializing;
Rid: d38247b75c757290143233e81884029e
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (DA USB VCOM Port)
TRYING TO OPEN COM94;
DEVICE INFO:
BB CHIP: MT6571_S00 [CA00, 00, 6571, 05]
HW_STORAGE_NAND: [Micron] NAND_MT29C4G48MAAHBAAKS_5WT [2C:BC:90] [SIZE=0x20000000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x13DC0000 SIZE: 0x0B3C0000


Loading the file ...
Cfg done ...
Formatting file system now...
Done;
Downloading bootloader...
Done;
Downloading images...
Done;
Success;

Time needed - 00:01:09

i read one backup the phone that only show logo blu now phone no power
i flashed whit this BLU_DASH_JR_TV_D140T.osp
and make this MEMORY_DUMP_BLU D140T_d38247b75c757290143233e81884029e but same result no power no logo blu dead complete



support need help
OTSmart_v1.0.0.834 i use this verson of soft


thanks support

Br....

Yaio...

[.:hack3r2k:.]

Are you really sure the model is D140T ? Batt is charged !? We added on the support factory flash files and seems yo uuse some old bad format of the file. You must use BLU_DASH_JR_TV_D140T_NEW.osp

Br

[Yaio]

ok i download and test


post result later

thanks support

BR...

Yaio...