flashing htc 616w - GSM-Forum

monsterpassword · 11-28-2016, 03:46

hello
otsmart is taking only 33 seconds to flash this phone and phone is in dead status. any help pls

Downloading DA;
Initializing;
Rid: 859dbe6ac4f54259d35a204a589acaf6
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem247.inf,%vcom_da%;Huawei DA USB VCOM (Android))
TRYING TO OPEN COM161;
DEVICE INFO:
BB CHIP: MT6592_S00 [CA00, 00, 6592, FF]
HW_STORAGE_EMMC: 0x484A0190 0x64314734 0xA4018604 0xF191FC12 [SIZE=0xE7600000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x62000000 SIZE: 0x85600000

Preparing to write FULL_DUMP_PART0;
Writing FULL_DUMP_PART0;

Time needed - 00:00:33

Log file saved to: LOG_28_11_2016_06_43_43.txt

is the firmware on support ok ?

thks
*******password

Fast Unlocker · 11-28-2016, 09:13

sure it is ok make sure you are flashing same model ?

**.:hack3r2k:.** · 11-28-2016, 18:40

It ends after 33 seconds because the write fails. Most probably some hw failure

Br

11-28-2016, 03:46	#1 (permalink)
monsterpassword No Life Poster Join Date: Jan 2007 Posts: 513 Member: 433756 Status: Offline Thanks Meter: 18	flashing htc 616w hello otsmart is taking only 33 seconds to flash this phone and phone is in dead status. any help pls Downloading DA; Initializing; Rid: 859dbe6ac4f54259d35a204a589acaf6 Requesting baudrate change; Done; USB SPEED: USB_HIGH_SPEED Switching to DA_HIGHSPEED_VCOM; Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86; If the detection fails, install manually the port from the device manager using usbvcom.inf; DA_HIGHSPEED_VCOM (@oem247.inf,%vcom_da%;Huawei DA USB VCOM (Android)) TRYING TO OPEN COM161; DEVICE INFO: BB CHIP: MT6592_S00 [CA00, 00, 6592, FF] HW_STORAGE_EMMC: 0x484A0190 0x64314734 0xA4018604 0xF191FC12 [SIZE=0xE7600000] IMEI1 [OTP 0000]: 000000-00-000000-0 IMEI2 [OTP 0000]: 000000-00-000000-0 PROVIDER: N/A USRDATA INFO: 0x62000000 SIZE: 0x85600000 Preparing to write FULL_DUMP_PART0; Writing FULL_DUMP_PART0; Time needed - 00:00:33 Log file saved to: LOG_28_11_2016_06_43_43.txt is the firmware on support ok ? thks *******password

11-28-2016, 09:13	#2 (permalink)
Fast Unlocker Product Supporter Join Date: Dec 2004 Location: Furious Team ... GPGIndustries Age: 45 Posts: 10,337 Member: 95960 Status: Offline Sonork: 100.1574721 Thanks Meter: 14,045	sure it is ok make sure you are flashing same model ?

11-28-2016, 18:40	#3 (permalink)
.:hack3r2k:. Product Manager Join Date: Aug 2002 Location: FuriouSTeaM Posts: 53,976 Member: 15022 Status: Offline Sonork: 100.53452 Thanks Meter: 61,567	It ends after 33 seconds because the write fails. Most probably some hw failure Br