FuriousGold Successfully Unlocked / Repaired / Flashed Phones !!!

[CHAUDHRAY ARSHAD]

here log

[faisal jee]

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable with testpoint connected]
Phone detected (MediaTek USB Port (COM169))
Preparing to start flash mode;
Preparing to open COM169
Connecting;
Downloading DA;
Initializing;
Rid: fcddd895c15f8ce58b618e045055166f
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6765 [CA00, 00, 6765, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333644 0xFA370142 0x9B55A4D6 [SIZE=0x749400000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xEE000000 SIZE: 0x659A00000



Contents saved to :
E:\SETUP\FG\PACK6\OTSmart_v1.0.0.3605_Cowabanga_Ed ition\jat l29\HUAWEI JAT-L29_IMEI_951715D7_8855D92E_fcddd895c15f8ce58b618e0 45055166f_5_09_2019_01_01_34.osp
Downloading images...
Done;
Searching phone;
(insert the USB cable in the powered off phone)

Phone detected (MediaTek PreLoader USB VCOM (Android) (COM182))
Preparing to start fastboot mode;

Done; Fastboot mode entered;
Connecting;
switching_fastboot_mode: OK;
resistance is futile : OK !?;
data_written : OK;
data_written : OK;
data_written : OK;
data_written : OK;
data_written : OK;
data_written : OK;
data_written : OK;
data_written : OK;

Factory Reset Protection successfully removed !


Time needed - 00:01:57

[fokal2008]

ITEL IT6080 SPD SC6531EFM FORMAT DONE BY CHOSING ITEL IT6110

[idrissou mohama]

wiko sunny 3 unlock by spdservice tols


Searching phone;
For an successful connection do the following:
1. Connect the phone powered off with the battery inside to the usb cable
Phone detected (@oem8.inf,%usbcomm_dl%;SPRD U2S Diag)
Preparing to sync;
Port opened [COM25];
Entering diagnostic mode;
Done;
Chip type: 0000:0000

Platform Version: MOCORTM_17C_W18.23.4_P2_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.23.4_P2
HW Version: sc7731e_modem
06-20-2018 11:11:40
Build number: W_K120SUN-user 8.1.0 OPM2.171019.012 1562315636 release-keys
PHONE INFO:
BT ADDR: FF:FF:FF:FF:FF:FF
SW IMEI[0]: 358074-09-553137-5
SW IMEI[1]: 358074-09-561217-5
SW IMEI[2]: 867400-02-031663-8
SW IMEI[3]: 867400-02-031664-6

SIMLOCK FLAG: ON

SIM_LOCK TYPE: 3

IMEI: 3xxxxx-xx-xxxxx-5 UNLOCK CODE: 88190403

Done;

Phone unlocked; Remove battery and cable;

Log file saved to: LOG_6_09_2019_18_20_40.txt


Time needed - 00:00:02

[TauheedMobiles]

Software engine version: 1.0.0.6621
Connect phone powered on !
Start auth !
SW Ver: ELI_IF_111208_1501
Imei: 354561021951622
Done;
Press power on !
Starting communication ...
Platform: E-Gold Voice ...
Preloader sent ....
Starting ...
Authorising ...
Loader sent ....

Flash ID(0): 0001:011A


Reading ...
Saved: SAGEM_354561021951622_ELI_IF_111208_1501_12.12.09_ 07.09.2019_PARTIAL.bin
Done !
Time needed - 00:01:20

[fokal2008]

ORANGE RISE53 DONE
Searching phone;
For an successful connection do the following:
1. Connect the phone powered off with the battery inside to the usb cable
Phone detected (@oem204.inf,%dvcdsc%;SCI USB2Serial)
Preparing to sync;
Port opened [COM129];
Entering diagnostic mode;
Done;
Chip type: 6B4C:5300

Platform Version: MOCORTM_15C_W17.39.2_P1.03_Debug
Project Version: sc983x_cp1
BASE Version: FM_BASE_15C_W17.39.2_P1.03
HW Version: sc983x_modem
12-22-2017 21:57:31
Build number: sp9832a_2h11_orange-user 7.0 NRD90M eng.jinjiy.20180412.165739 release-keys
PHONE INFO:
BT ADDR: FF:FF:FF:FF:FF:FF
SW IMEI[0]: 867302-03-175584-8
SW IMEI[1]: 867302-03-185584-6
SW IMEI[2]: 867400-02-031663-8
SW IMEI[3]: 867400-02-031664-6

SIMLOCK FLAG: OFF

SIM_LOCK TYPE: 2
ERROR: Simlock not enabled ! Phone is unlocked;

Log file saved to: LOG_10_09_2019_15_41_39.txt

Time needed - 00:00:00

AFTER THAT REPAIR SLOCK DONE

[maxpatri9]

huawei p20 lite frp done

Fly Captain Huawei Resurrector 0.0.0.38
user:57A96656

Device detected:
COM68: HUAWEI USB COM 1.0 (COM68)
BOOTLOADER File to update: Kirin659_T0_A8.0_V1
10/09/2019 03:44:58 p.m. Starting to write device...

Process identifier:4663075


Writing bootloader...
Writing Kirin659_T0_A8.0_V1_3.dtwork...
Writing Kirin659_T0_A8.0_V1_4.dtwork...

Waiting for fastboot device...
Device found: 6NUDU18811009532


Looking for a device in fastboot mode
Device found: 6NUDU18811009532


Getting IMEI...
Getting build number...
Getting model ...
Getting battery state...
Getting backdoor info...
Getting lock state info...
Getting lock boot info...

SN:6NUDU18811009532
IMEI:867904038917063

IMEI1:000000000000000

MEID:00000000000000
Build number: :ANE-LX3 9.1.0.134(C771E4R1P7)
Model: ANE-LX3
Battery state: 0
OEM lock state info:
FB LockState: UNLOCKED
USER LockState: LOCKED
OEM get bootinfo:
unlocked


Unlocking FRP...
Writing FRP partition
FRP partition UPDATE :FAIL partition error
Writing FRP partition
FRP partition UPDATE ...OK
Software written
10/09/2019 03:46:35 p.m. Writing device finished OK

[maxpatri9]

HUAWEI P20 LITE DOWNGRADE DONE

Fly Captain Huawei Resurrector 0.0.0.38
user:57A96656

Looking for a device in upgrade mode
COM661: Android Adapter PCUI (COM661)
COM662: DBAdapter Reserved Interface (COM662)

11/09/2019 05:14:56 p.m. Starting to write device in UPGRADE mode...
Device found: 6NUDU18811008812



11/09/2019 05:15:02 p.m. start to write update file
File to update: UPDATE.APP
File size: 4,339,279,260 bytes
Current version(CURVER): ANE-BD 1.0.0.999

Process identifier:4665305

Validating file...
Detecting port...
Preparing to write...
Writing file 1 of 34: SHA256RSA...OK
Writing file 2 of 34: CRC...OK
Writing file 3 of 34: CURVER...OK
Writing file 4 of 34: VERLIST...OK
Writing file 5 of 34: PACKAGE_TYPE...OK
Writing file 6 of 34: EFI...OK
Writing file 7 of 34: XLOADER...OK
Writing file 8 of 34: FW_LPM3...OK
Writing file 9 of 34: FASTBOOT...OK
Writing file 10 of 34: MODEMNVM_UPDATE...OK
Writing file 11 of 34: TEEOS...OK
Writing file 12 of 34: TRUSTFIRMWARE...OK
Writing file 13 of 34: SENSORHUB...OK
Writing file 14 of 34: FW_HIFI...OK
Writing file 15 of 34: KERNEL...OK
Writing file 16 of 34: RAMDISK...OK
Writing file 17 of 34: RECOVERY_RAMDISK...OK
Writing file 18 of 34: RECOVERY_VENDOR...OK
Writing file 19 of 34: ERECOVERY_KERNEL...OK
Writing file 20 of 34: ERECOVERY_RAMDISK...OK
Writing file 21 of 34: ERECOVERY_VENDOR...OK
Writing file 22 of 34: RECOVERY_VBMETA...OK
Writing file 23 of 34: ERECOVERY_VBMETA...OK
Writing file 24 of 34: DTS...OK
Writing file 25 of 34: MODEM_FW...OK
Writing file 26 of 34: VBMETA...OK
Writing file 27 of 34: ODM...OK
Writing file 28 of 34: CACHE...OK
Writing file 29 of 34: SYSTEM...OK
Writing file 30 of 34: CUST...OK
Writing file 31 of 34: VENDOR...OK
Writing file 32 of 34: VERSION...OK
Writing file 33 of 34: PRODUCT...OK
Writing file 34 of 34: USERDATA...OK
Software written
11/09/2019 05:33:26 p.m. Writing device finished OK

[hamat]

Software engine version: 1.0.0.10850
Searching phone ...

MODEL : QCOM SERIES 51
COMPILED DATE : Jul 11 2017 06:36:00
RELEASE DATE : May 11 2017 04:00:00
FIRMWARE INFO : MPSS.JO.3.0-00296-8909_GEN_PACK-1
IMEI : 86485503170044-8
BLUETOOTH ADDR : 00 00 00 00 00 00

FIRMWARE: P890R81_BELLV1.0.0B12

close_event_report: OK;
close_log_report: OK;
close_message_report: OK;
closing_com_port: OK;
Starting the backup process;
connect_server: OK;
backup in progress: OK;
Backup saved to: C:\Users\Hp\Desktop\FURIOUS GOLD\PACK 5\86485503170044_12_09_2019_11_22_29.bkp
switching_download_mode: OK;
closing_com_port: OK;
Preparing to open COM551
Connecting;
Loading;
Init;
Port opened;
Hello Received;
BOOT Loaded;
Getting config;
Getting mem info;
Found an eMMC memory 22CD
Looking for the interface;
Port found [Qualcomm HS-USB QDLoader 9008 (COM181)]
connect_server: OK;
restore in progress: OK;
SIM_LOCK REMOVED !

Log file saved to: LOG_12_09_2019_11_26_40.txt

Time needed - 00:04:15

[ThePhoneTechDoc]

Using library Brom_DLL_v7.1813.3
Searching phone;
(insert the USB cable in the powered off phone
or
insert the USB cable in the powered off phone while keeping volume down pressed)
Phone detected (MediaTek USB Port (COM45))
Preparing to start meta mode;
Requesting authorization;
Searching for debug port; (be sure drivers from support were installed)
Meta mode entered;
Baseband Chip: MT6739,S01
Sw version:
Hw Version: alps-mp-o1.mp1-V1.112_k39tv1.bsp_P7

Baseband Chip: MT6739
Sw version: MOLY.LR12A.R3.MP.V10.3.P14
Hw Version: TK_MD_L4_HW
Reading phone info;
IMEI 1: 015242-00
IMEI 2: 000000-00-000000-0
Loading config;
Done;
Working;
Unlocking;

Phone unlocked; Remove battery and cable;

Time needed - 00:00:46

[maxpatri9]

HUAWEI CRO L03 UNLOCK DONE

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM10))
Preparing to start flash mode;
Preparing to open COM10
Connecting;
Downloading DA;
Initializing;
Rid: ea1d5cff2c17425b20306fac1674dff6
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6737M [CA00, 00, 335, FF]
HW_STORAGE_EMMC: 0x484A0190 0x61344738 0xF222D432 0x4BB48E34 [SIZE=0x1D2C00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xC4000000 SIZE: 0x10CF80000



Searching data;


Locked to [SIM1]: 370-02
code_cat_n: 2420678110313225 enabled: yes tries: 10
code_cat_ns: FFFFFFFF enabled: no tries: 10
code_cat_sp: FFFFFFFF enabled: no tries: 10
code_cat_c: FFFFFFFF enabled: no tries: 10
code_cat_sim: FFFFFFFF enabled: no tries: 10
code_cat_ns_sp: FFFFFFFF enabled: no tries: 10
code_cat_sim_c: FFFFFFFF enabled: no tries: 10

Phone unlocked; Remove battery and cable;

Time needed - 00:00:05

Log file saved to: LOG_13_09_2019_13_16_20.txt

[djmurod86]

Software engine version: 1.0.0.6486
Connect phone powered on !
Start auth !
SW Ver: ERT-TJ-MLT-P108A26(G)(S)V1.0.0B02
Imei: 356894030025726
Done;
Press power on !
Starting communication ...
Platform: E-Gold Voice ...
Preloader sent ....
Starting ...
Authorising ...
Loader sent ....

Flash ID(0): 00EC:0106


Reading ...
Saved: ZTE_356894030025726_ERT-TJ-MLT-P108A26(G)(S)V1.0.0B02_11.32.07_14.09.2019_PARTIAL .bin
Erasing ...
Writing ...
Erasing ...
Writing ...
Unlocked ! Remove battery and put back !
Time needed - 00:01:25

[beli_gl]

COOLPAD 3622A unlock done

Connecting;
Check your phone and "Always allow from this computer" and select "OK".
Connected;
BRAND: COOLPAD
MODEL: COOLPAD 3622A
ANDROID: v5.1.1
CPU: QCOM
IMEI: NA
KERNEL: Linux version 3.10.49-g3523c12-00138-g30951a4 (mine@ubuntu) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Fri Mar 31 14:39:55 CST 2017
Cleaning;
Setting usb config;
Done;
Reconnecting;
Looking for the interface;
Port found [Coolpad Android Diagnostics USB VCOM (COM118)]
Backing up sensitive data;
connect_server: OK;
backup in progress: OK;
Backup saved to: D:\Boksat\Furios gold\instalimi\FURIOUS-GOLD\PACK5\ADB\
Done;
Done;
Done;
Restarting the phone;
Setting usb config;
Done;
Reconnecting;
Looking for the interface;
Port found [Coolpad Android Diagnostics USB VCOM (COM118)]
Restoring sensitive data;
connect_server: OK;
restore in progress: OK;
Done;

SIM_LOCK REMOVED ! POWER OFF / ON THE PHONE MANUALLY TO COMPLETE THE UNLOCK !

Log file saved to: LOG_16_09_2019_12_58_26.txt

Time needed - 00:05:02

[IM8]

unlock done by otzflasher selecting Ayasha

Using library Brom_DLL_v5.1428.0
Searching phone;
(for some models keep SPACE or * (STAR) key pressed before inserting the cable)
Phone detected (MediaTek USB Port (COM16))
Preparing to start meta mode;
Meta mode entered;
Baseband Chip: MT6261
Sw version: MOBIWIRE_NAKAI_SS_L_V01.2_181214_MP
Hw Version: SAGETEL61M_11C_HW
Reading phone info;
IMEI: 353292-10-0234xxx
Reading security;
Done;
Checking;
Preparing;
Writing security;
Phone unlocked; Remove battery and cable;

Time needed - 00:00:16

Log file saved to: LOG_18_09_2019_14_56_46.txt

[theboy]

Software engine version: 1.0.0.10880
Searching phone ...

MODEL : QCOM SERIES 56
COMPILED DATE : Jun 24 2019 01:16:00
RELEASE DATE : May 10 2019 02:00:00
FIRMWARE INFO : MPSS.TA.3.0.c1-00366-8953_GEN_PACK-1.202713.1.204312.1
IMEI : 35477709031702-0
BLUETOOTH ADDR : 00 00 00 00 00 00

FIRMWARE: VDF_P450K10V1.0.0B41

close_event_report: OK;
close_log_report: OK;
close_message_report: OK;
closing_com_port: OK;
Starting the backup process;
connect_server: OK;
backup in progress: OK;
Backup saved to: C:\Program Files (x86)\FURIOUS-GOLD\PACK5\QCOM_SMART_TOOL_v1.0.0.10879\3547770903 1702_20_09_2019_12_19_03.bkp
switching_download_mode: OK;
closing_com_port: OK;
Preparing to open COM31
Connecting;
Loading;
Init;
Port opened;
Hello Received;
BOOT Loaded;
Getting config;
Getting mem info;
Found an eMMC memory 22F9
start_frp_reset: OK;

Thanks again Daniel