FuriousGold Successfully Unlocked / Repaired / Flashed Phones !!!

[maxpatri9]

ALCATEL 5049G UNLOCK DONE
Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM9))
Preparing to start flash mode;
Preparing to open COM9
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 61cc5e7148011d136600c39792eefabb
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem220.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM5;
DEVICE INFO:
BB CHIP: MT6737M [CA00, 00, 335, 05]
HW_STORAGE_EMMC: 0x46000115 0x4D323145 0xB4430742 0x4954B4C4 [SIZE=0x3A4A00000]
IMEI1 [OTP 0000]: 014917-00-030770-1
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 5049G-2ARGDO1
USRDATA INFO: 0xEF000000 SIZE: 0x2B1280000



Searching data;


Locked to [SIM1]: 370-01
code_cat_n: 8073329137477019 enabled: yes tries: 9
code_cat_ns: 9871278087996564 enabled: no tries: 10
code_cat_sp: 0302048144143191 enabled: no tries: 10
code_cat_c: 2309511244018725 enabled: no tries: 10
code_cat_sim: 8659212722329129 enabled: no tries: 10
code_cat_ns_sp: 2966812644317170 enabled: no tries: 5
code_cat_sim_c: 6862921992624451 enabled: no tries: 5

Phone unlocked; Remove battery and cable;

Time needed - 00:00:06

Log file saved to: LOG_18_02_2019_16_41_09.txt

[ThePhoneTechDoc]

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM150))
Preparing to start flash mode;
Preparing to open COM150
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 1ffdb9203d6d63f367624f284a532046
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6763 [CA01, 01, 6763, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333158 0xDDF30742 0xD7351CA8 [SIZE=0x748800000]
IMEI1 [OTP 0001]: 015126-00-021520-8
IMEI2 [OTP 0001]: 000000-00-000000-0
PROVIDER: 6062W-2BTBUS7
USRDATA INFO: 0x13B800000 SIZE: 0x6088FBE00



Searching data;
Checking server support license;
Bruteforcing ... relax ;-)
Buteforce took 00:41:06
Checking data integrity;
Data integrity: OK;
SIM_LOCK: ENABLED
Rebuilding security;

Phone unlocked; Remove battery and cable;

Time needed - 00:41:09

[rubelgsm]

Using library Brom_DLL_v7.1813.3
Searching phone;
(insert the USB cable in the powered off phone
or
insert the USB cable in the powered off phone while keeping volume down pressed)
Phone detected (MediaTek USB Port (COM32))
Preparing to start meta mode;
Requesting authorization;
Searching for debug port; (be sure drivers from support were installed)
Meta mode entered;
Baseband Chip: MT6739,S01
Sw version:
Hw Version: alps-mp-o1.mp1-V1.54_k39tv1.bsp_P21

Baseband Chip: MT6739
Sw version: MOLY.LR12A.R2.MP.V18.P22
Hw Version: TK_MD_L4_HW
Reading phone info;
IMEI 1: 353429-09-193602-5
IMEI 2: 000000-00-000000-0
Loading config;
Done;
Working;
Unlocking;

Phone unlocked; Remove battery and cable;

Time needed - 00:00:35

Log file saved to: LOG_20_02_2019_18_22_32.txt

[maxpatri9]

ALCATEL 5099A UNLOCK DONE

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM9))
Preparing to start flash mode;
Preparing to open COM9
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 8329e669fa745210fce0810ff3fc5324
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem220.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM5;
DEVICE INFO:
BB CHIP: MT6737T [CA00, 00, 321, 05]
HW_STORAGE_EMMC: 0x51000115 0x4D333645 0x765E0342 0x7394C1D8 [SIZE=0x3A4A00000]
IMEI1 [OTP 0000]: 015106-00-010933-8
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 5099A-2BRGDO1
USRDATA INFO: 0xEE000000 SIZE: 0x2B2280000



Searching data;


Locked to [SIM1]: 370-01
code_cat_n: 7020743451166900 enabled: yes tries: 10
code_cat_ns: 7020743451166900 enabled: no tries: 0
code_cat_sp: 7020743451166900 enabled: no tries: 0
code_cat_c: 7020743451166900 enabled: no tries: 0
code_cat_sim: 7020743451166900 enabled: no tries: 0

Phone unlocked; Remove battery and cable;

Time needed - 00:00:03

Log file saved to: LOG_20_02_2019_13_55_16.txt



Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM9))
Preparing to start flash mode;
Preparing to open COM9
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: d1351e8523d02493cd513c856e2a2b9e
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem220.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM5;
DEVICE INFO:
BB CHIP: MT6737T [CA00, 00, 321, 05]
HW_STORAGE_EMMC: 0x51000115 0x4D333645 0x9C1F0342 0x175537D6 [SIZE=0x3A4A00000]
IMEI1 [OTP 0000]: 015106-00-053107-7
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 5099A-2BAVDO1
USRDATA INFO: 0xEE000000 SIZE: 0x2B2280000



Searching data;


Locked to [SIM1]: 370-02
code_cat_n: 7451887842241017 enabled: yes tries: 5
code_cat_ns: 7451887842241017 enabled: no tries: 0
code_cat_sp: 7451887842241017 enabled: no tries: 0
code_cat_c: 7451887842241017 enabled: no tries: 0
code_cat_sim: 7451887842241017 enabled: no tries: 0

Phone unlocked; Remove battery and cable;

Time needed - 00:00:04

Log file saved to: LOG_20_02_2019_13_56_15.txt

[gunit1]

Alcatel 4009x unlock network only furious was done

Using library Brom_DLL_v7.1522.2
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM25))
Preparing to start flash mode;
Preparing to open COM25
Connecting;
Downloading DA;
Initializing;
Rid: 13af8d9becdf6b03413c99ee99349678
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver\x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem282.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM30;
DEVICE INFO:
BB CHIP: MT6572_S00 [CA00, 00, 6572, 05]
HW_STORAGE_EMMC: 0x45000170 0x44453445 0xF1270134 0xB5843A14  [SIZE=0xE2480000]
IMEI1 [OTP 0001]: 355749-08-115018-0
IMEI2 [OTP 0001]: 000000-00-000000-0
PROVIDER: 4009X-2AE8GB1
USRDATA INFO: 0x61180000 SIZE: 0x7D300000



Searching data;


Locked to [SIM1]:	234-30
code_cat_n:	4498173806710033 enabled:	yes	tries: 0
code_cat_ns:	8618055591251750 enabled:	no	tries: 10
code_cat_sp:	3898837393680457 enabled:	no	tries: 10
code_cat_c:	2035847311622518 enabled:	no	tries: 10
code_cat_sim:	1975049113803831 enabled:	no	tries: 10
code_cat_ns_sp:	9490868619275888 enabled:	no	tries: 5
code_cat_sim_c:	9490868619275888 enabled:	no	tries: 5

Phone unlocked; Remove battery and cable;

Time needed - 00:00:06

Log file saved to: LOG_21_02_2019_10_17_07.txt

[mtb116]

Alcatel 3026G unlock done

Searching phone;
For an successful connection do the following:
1. Remove battery and usb cable
2. Insert the usb cable in the phone
3. Keep pressed the boot key and insert the battery
Phone detected (@oem76.inf,%dvcdsc%;SCI USB2Serial)
Preparing to sync;
Port opened [COM4];
Mobile type: SPRD3
Connected;
Starting;
FDL sent;
Syncing;
Loader version: Spreadtrum Boot Block version 1.1
Starting FDL2;
FDL2 sent;
Chip type: 7703:A001
Starting auth;

Memory NAND [CS0]: 0098:00BA - SIZE : 10000000
EFUSE HASH: 0000000000000000000000000000000000000000
EFUSE LOCK STATUS: 000E 000E 000E 000E 000E
HW IMEI : 000000-00-000000-0
Reading phone info;
PHONE INFO: 3026G-2AVDAU1
BT ADDR: 1C:03:8B:2E:E6:E0
SW IMEI[0]: 3515xx-xx-xxxxxx-x
SW IMEI[1]: 3527xx-xx-xxxxxx-x
SW IMEI[2]: 3585xx-xx-xxxxxx-x
SW IMEI[3]: 9105xx-xx-xxxxxx-x

SIMLOCK FLAG: ON
FIXED NV BASE: 00040000
Reading NV;


NV saved to : NV_000000-00-000000-0_3515xx-xx-xxxxxx-x_7703A001_22_02_2019_12_40_24.spd
Gathering security data;
Security check result: 0
Re-programming;
NV programmed;
Done;

Phone unlocked; Remove battery and cable;

[Eerchant]

thanks Furious!

Connect the phone powered off with both volume down and up pressed or connect the phone powered off and leave it connected to the usb till it shows the battery/charging screen ;
Phone detected (@oem226.inf,%qcomdevice90080%;Qualcomm HS-USB QDLoader 9008)
Preparing to start flash mode; 
Preparing to open COM19
Connecting;
Loading;
Init;
Port opened;
Hello Received;
BOOT Loaded;
Getting config;
Getting mem info;
Found an eMMC memory 22CD size 3,5 GB

IMEI:		014684002xxxxx-x
PTH:		10
PTS:		C5S
PROV_ID:		4044W-2BTBUS1
SBTADDR:	D4:28:D5:CE:AA:69
SWIFIADDR:	D4:28:D5:B5:F2:54
HS_PN:		SAA61UBAA10C
SSN:		A7KF09CD6NA04P9

Bruteforcing data; This operation can take up to 30 minutes !!!
Done;
Work id:		0F67E74F
Done;
Stype:		00000001
SECURITY: XWC5UMS2BR00 Size: 0000032F
Backup saved to: 014684002xxxxx-x
Unlocking;
SIM_LOCK REMOVED !

Log file saved to: LOG_23_02_2019_09_25_07.txt

Time needed - 00:30:52

[iftikhar_246]

vdf 600 unlock done

MODEL : QCOM SERIES 51
COMPILED DATE : May 19 2016 08:35:00
RELEASE DATE : Feb 1 2016 00:00:00
FIRMWARE INFO : MPSS.JO.1.1.c1-00028-8909_GEN_PACK-1
IMEI : 35559507687145-8
BLUETOOTH ADDR : 00 00 00 00 00 00

FIRMWARE: IE_MR1_VDF_P809V50V1.0.0B02

close_event_report: OK;
close_log_report: OK;
close_message_report: OK;
closing_com_port: OK;
Starting the backup process;
connect_server: OK;
backup in progress: OK;
Backup saved to: C:\Program Files\FURIOUS-GOLD\PACK5\35559507687145_24_02_2019_14_38_44.bkp
switching_download_mode: OK;
closing_com_port: OK;
Preparing to open COM15
Connecting;
Loading;
Init;
Port opened;
Hello Received;
BOOT Loaded;
Getting config;
Getting mem info;
Found an eMMC memory 22CD
Looking for the interface;
Port found [ZTE Handset Diagnostic Interface (COM21)]
connect_server: OK;
restore in progress: OK;
SIM_LOCK REMOVED !

Log file saved to: LOG_24_02_2019_14_41_58.txt

Time needed - 00:03:17

[fokal2008]

UNLOCK ALCATEL OT7048X DONE BY QCOM SMART TOOL MODULE PACK5

Connect the phone powered off with both volume down and up pressed or connect the phone powered off and leave it connected to the usb till it shows the battery/charging screen ;
Phone detected (@oem13.inf,%qcomdevice90080%;Qualcomm HS-USB QDLoader 9008)
Preparing to start flash mode; 
Preparing to open COM6
Connecting;
Loading;
Init;
Port opened;
Hello Received;
BOOT Loaded;
Getting config;
Getting mem info;
Found an eMMC memory 22D4 size 7,3 GB

IMEI:        86702302131769-2
PTH:        07
PTS:        FMP
PROV_ID:        7048X-2AMNCM7
SBTADDR:    F0:34:04:60:0F:B3
SWIFIADDR:    F0:34:04:60:0F:B5
HS_PN:        SAA64HAAC10C
SSN:        5WKB26CPLOY0332

Work id:        0FF47A55
Setup 1;
Done;
Setup 2;
Done;
Setup 3;
Done;
Uploading;
Done;
SECURITY: X7FM1UP0BQ00 Size: 00000430
Backup saved to: 86702302131769-2
Backup file(s) removed;
Checking the simlock;
Magic ok;
Unlocking;
SIM_LOCK REMOVED !

Log file saved to: LOG_25_02_2019_14_48_47.txt

Time needed - 00:00:31

[Freeboy08]

Searching phone;
For an successful connection do the following:
1. Remove battery and usb cable
2. Insert the usb cable in the phone
3. Keep pressed the boot key and insert the battery
Phone detected (@oem26.inf,%usbcomm_dl%;SPRD U2S Diag)
Preparing to sync;
Port opened [COM9];
Mobile type: SPRD3
Connected;
Starting;
FDL sent;
Syncing;
Loader version: (c)2014, FuriouSTeaM GSM DEVELOPEMENT
Chip type: 6531:0001
Starting auth;
HW IMEI : 000000-00-000000-0

Memory [CS0]: 00C8:0060:0017 - SIZE : 00800000
Reading phone info;
PHONE INFO: 2051X-3AVRGB1
BT ADDR: 9C:CB:4D:0E:A9:20
SW IMEI[0]: 358329-07-003079-7
SW IMEI[1]: 352751-01-952326-7
SW IMEI[2]: 358570-01-010389-3
SW IMEI[3]: 910575-60-140046-8

SIMLOCK FLAG: OFF
FIXED NV BASE: 30658000
Reading NV;


NV saved to : NV_000000-00-000000-0_358329-07-003079-7_65310001_25_02_2019_16_05_23.spd

IMEI: 358329-07-003079-7 UNLOCK CODE: 16475295 or 3583290716475295

ERROR: Simlock not enabled ! Phone is unlocked;

Log file saved to: LOG_25_02_2019_16_05_36.txt


Time needed - 00:00:30

[Shensohau]

Smooth MINI Movistar VE Unlock Done

[maxpatri9]

huawei dra-lx3 unlock done using dra-l23
Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off with volume down and up pressed to the usb cable]
Phone detected (MediaTek USB Port (COM9))
Preparing to start flash mode;
Preparing to open COM9
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 1c1f725bcf56b3f25d79d93b41cac380
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6739 [CA00, 00, 6739, 00]
HW_STORAGE_EMMC: 0x46000115 0x4D323645 0xB4330342 0x2135C007 [SIZE=0x3A4A00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x9B000000 SIZE: 0x307DFBE00



Searching data;

Phone unlocked; Remove battery and cable;

Time needed - 00:00:01

Log file saved to: LOG_25_02_2019_16_42_56.txt

[starlyn1232]

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM63))
Preparing to start flash mode;
Preparing to open COM63
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 503067b676e5cac0da02703b328dab9c
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6739 [CB00, 02, 6739, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333645 0x5DE10342 0xD7A5EB06 [SIZE=0x3A4A00000]
IMEI1 [OTP 0001]: 015249-TEAM-WAWAWA
IMEI2 [OTP 0001]: 000000-00-000000-0
PROVIDER: 5059Z-2AE4US7
USRDATA INFO: 0x133800000 SIZE: 0x26CAFBE00



Searching data;
Checking server support license;
Bruteforcing ... relax ;-)
Buteforce took 00:03:58
Checking data integrity;
Data integrity: OK;
SIM_LOCK: ENABLED
Rebuilding security;

Phone unlocked; Remove battery and cable;

Time needed - 00:04:04

5059Z UNLOCK DONE Furious Pack 6

[maxpatri9]

zte z820 frp done

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off with volume up pressed to the usb cable]
Phone detected (MediaTek USB Port (COM9))
Preparing to start flash mode;
Preparing to open COM9
Connecting;
Downloading DA;
Initializing;
Rid: c802b43eff456a2b1b6f3bcd78490b0a
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
DEVICE INFO:
BB CHIP: MT6735M [CA00, 00, 335, 05]
HW_STORAGE_EMMC: 0x51000115 0x4D533237 0xABBB0042 0xBFB2A090 [SIZE=0x1D2880000]
IMEI1 [OTP 00FF]: 867117-02-292647-5
IMEI2 [OTP 00FF]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xD6000000 SIZE: 0xF8480000


Factory Reset Protection successfully removed !


Time needed - 00:00:02

Log file saved to: LOG_26_02_2019_11_57_04.txt

[ThePhoneTechDoc]

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM150))
Preparing to start flash mode;
Preparing to open COM150
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 1068e9f7c08a380301a93f57d6e11fbf
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6739 [CB00, 02, 6739, 00]
HW_STORAGE_EMMC: 0x46000115 0x4D32364E 0x2A120342 0x9F75B168 [SIZE=0x1D2880000]
IMEI1 [OTP 0001]: 356745-09-03
IMEI2 [OTP 0001]: 356745-09-03
PROVIDER: 5033J-2COFUS1
USRDATA INFO: 0x85000000 SIZE: 0x1494FBE00


Factory Reset Protection successfully removed !


Time needed - 00:00:00