FuriousGold Successfully Unlocked / Repaired / Flashed Phones !!!

[maxpatri9]

ALCATEL 5033A FRP DONE

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM4))
Preparing to start flash mode;
Preparing to open COM4
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 7246ee08332bff99ea883bd2058531ec
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6739 [CA00, 00, 6739, 00]
HW_STORAGE_EMMC: 0x46000115 0x4D32364E 0xDFA40342 0x47B44DD2 [SIZE=0x1D2880000]
IMEI1 [OTP 0000]: 356268-09-006441-4
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 5033A-2ARGDO1
USRDATA INFO: 0x85000000 SIZE: 0x1494FBE00


Factory Reset Protection successfully removed !


Time needed - 00:00:00

Log file saved to: LOG_11_07_2019_17_40_40.txt

[bright hlatini]

Searching phone;
For an successful connection do the following:
1. Connect the phone powered off with the battery inside to the usb cable
Phone detected (@oem89.inf,%usbcomm_dl%;SPRD U2S Diag)
Preparing to sync;
Port opened [COM28];
Entering diagnostic mode;
Done;
Chip type: 0000:0000

Platform Version: MOCORTM_17C_W18.23.4_P15_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.23.4_P15
HW Version: sc7731e_modem
01-15-2019 19:33:25
Build number: sp7731ef_19c10_native-user 4.4.4 KTU84P eng.fuqiang.20190310.232211 test-keys
PHONE INFO:
BT ADDR: FF:FF:FF:FF:FF:FF
SW IMEI[0]: 864144-04-098957-7
SW IMEI[1]: 864144-04-148957-7
SW IMEI[2]: 867400-02-031663-8
SW IMEI[3]: 867400-02-031664-6

SIMLOCK FLAG: ON

SIM_LOCK TYPE: 2

IMEI: 864144-04-098957-7 UNLOCK CODE: 16142496

Done;

Phone unlocked; Remove battery and cable;

Log file saved to: LOG_16_07_2019_00_48_30.txt


Time needed - 00:00:06

[ramoon20]

Hi to all
press power botton tell ligth on then press ok then power off and press ok thats' it
Software engine version: 1.0.0.6621
Connect phone powered on !
Start auth !
SW Ver: EFSPI-FR-SFR-P108E10FM(S)V1.0.0B08
Imei: 35************
Done;
Press power on !
Starting communication ...
Platform: E-Gold Voice ...
Preloader sent ....
Starting ...
Authorising ...
Loader sent ....

Flash ID(0): 00EC:0103


Reading ...
Saved: ZTE_353894032735036_EFSPI-FR-SFR-P108E10FM(S)V1.0.0B08_12.11.30_17.07.2019_PARTIAL. bin
Erasing ...
Writing ...
Erasing ...
Writing ...
Unlocked ! Remove battery and put back !
Time needed - 00:01:29

[Tom_ptm]

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable with testpoint connected]
Phone detected (MediaTek USB Port_V1632 (COM6))
Preparing to start flash mode;
Preparing to open COM6
Connecting;
Downloading DA;
Initializing;
Rid: ecb3a963757dbcb8a6ff9d343874a76f
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6761 [CA01, 200, 6761, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333644 0x63B70142 0x19169E9B [SIZE=0x749400000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x110000000 SIZE: 0x637A00000


Loading the file ...
Cfg done ...
Downloading images...
Done;
Downloading bootloader...
Done;
Success;

Time needed - 00:03:33

Log file saved to: LOG_18_07_2019_08_41_25.txt

[..::GMSR::..]

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable with testpoint connected]
Phone detected (MediaTek USB Port (COM21))
Preparing to start flash mode;
Preparing to open COM21
Connecting;
Downloading DA;
Initializing;
Rid: 7a1ad39cec19ead537544ddd8276b16f
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6761 [CA01, 200, 6761, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333644 0x4C160142 0x3F164CD0 [SIZE=0x749400000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x110000000 SIZE: 0x637A00000



Searching data;
Checking data;

Contents saved to :
C:\Users\Dream\Desktop\log\HUAWEI Y5 2019_IMEI_5A1F4E99_ABC25725_7a1ad39cec19ead537544d dd8276b16f_19_07_2019_11_18_32.osp
Downloading images...
Done;
Searching phone;
(insert the USB cable in the powered off phone)

Phone detected (PreLoader USB VCOM Port (COM9))
Preparing to start fastboot mode;

Done; Fastboot mode entered;
Connecting;
switching_fastboot_mode: OK;
resistance is futile : OK !?;
data_written : OK;
data_written : OK;
data_written : OK;
data_written : OK;
data_written : OK;
data_written : OK;
data_written : OK;

IMEI repaired; Remove battery and cable;

Time needed - 00:01:11

Log file saved to: LOG_19_07_2019_11_19_42.txt

[..::GMSR::..]

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable with testpoint connected]
Phone detected (MediaTek USB Port (COM21))
Preparing to start flash mode;
Preparing to open COM21
Connecting;
Downloading DA;
Initializing;
Rid: 7a1ad39cec19ead537544ddd8276b16f
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6761 [CA01, 200, 6761, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333644 0x4C160142 0x3F164CD0 [SIZE=0x749400000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x14E800000 SIZE: 0x5F9200000


Loading the file ...
Cfg done ...
Downloading bootloader...
Done;
Downloading images...
Done;
Success;

Time needed - 00:07:01

Log file saved to: LOG_19_07_2019_14_08_20.txt

[..::GMSR::..]

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable with testpoint connected]
Phone detected (MediaTek USB Port (COM21))
Preparing to start flash mode;
Preparing to open COM21
Connecting;
Downloading DA;
Initializing;
Rid: 44d1634942885fd59c9008c2c6eb1f51
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6765 [CA00, 00, 6765, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333644 0xBA030142 0x17167C90  [SIZE=0x749400000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x14E800000 SIZE: 0x5F9200000


Loading the file ...
Cfg done ...
Downloading bootloader...
Done;
Downloading images...
Done;
Success;

Time needed - 00:09:42

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable with testpoint connected]
Phone detected (MediaTek USB Port (COM21))
Preparing to start flash mode;
Preparing to open COM21
Connecting;
Downloading DA;
Initializing;
Rid: 44d1634942885fd59c9008c2c6eb1f51
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6765 [CA00, 00, 6765, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333644 0xBA030142 0x17167C90  [SIZE=0x749400000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xEE000000 SIZE: 0x659A00000



Contents saved to :
C:\Users\Dream\Desktop\log\HUAWEI HONOR 8A_IMEI_CDDB009E_FC8D12FE_44d1634942885fd59c9008c2c6eb1f51_20_07_2019_11_11_36.osp
Downloading images...
Done;
Searching phone;
(insert the USB cable in the powered off phone)

Phone detected (PreLoader USB VCOM Port (COM9))
Preparing to start fastboot mode; 

Done; Fastboot mode entered;
Connecting;
switching_fastboot_mode: OK;
resistance is futile : OK !?;
data_written : OK;
data_written : OK;
data_written : OK;
data_written : OK;
data_written : OK;
data_written : OK;

Factory Reset Protection successfully removed !


Time needed - 00:01:21

Log file saved to: LOG_20_07_2019_11_12_57.txt

[Southsider2009]

First Unlock attempt after using other boxes.

Searching phone;
For an successful connection do the following:
1. Connect the phone powered off with the battery inside to the usb cable
Phone detected (@oem276.inf,%usbcomm_dl%;SPRD U2S Diag)
Preparing to sync;
Port opened [COM20];
Entering diagnostic mode;
Done;
Chip type: 6B4C:5300

Platform Version: MOCORTM_15C_W17.39.2_P1.03_Debug
Project Version: sc983x_cp1
BASE Version: FM_BASE_15C_W17.39.2_P1.03
HW Version: sc983x_modem
12-22-2017 21:57:31
Build number: sp9832a_2h11_orange-user 7.0 NRD90M eng.jinjiy.20180412.165739 release-keys
PHONE INFO:
BT ADDR: FF:FF:FF:FF:FF:FF
SW IMEI[0]: 867302-03-174587-2
SW IMEI[1]: 867302-03-174587-0
SW IMEI[2]: 867400-02-031663-8
SW IMEI[3]: 867400-02-031664-6

SIMLOCK FLAG: OFF

SIM_LOCK TYPE: 2
ERROR: Simlock not enabled ! Phone is unlocked;


Repair SIM lock done after phone still shows lock but other softwares says done.

Effect here is that it doesnt accept code read by both boxes, counter not responding

Searching phone;
For an successful connection do the following:
1. Connect the phone powered off with the battery inside to the usb cable
Phone detected (@oem276.inf,%usbcomm_dl%;SPRD U2S Diag)
Preparing to sync;
Port opened [COM20];
Entering diagnostic mode;
Done;
Chip type: 6B4C:5300

Platform Version: MOCORTM_15C_W17.39.2_P1.03_Debug
Project Version: sc983x_cp1
BASE Version: FM_BASE_15C_W17.39.2_P1.03
HW Version: sc983x_modem
12-22-2017 21:57:31
Build number: sp9832a_2h11_orange-user 7.0 NRD90M eng.jinjiy.20180412.165739 release-keys
PHONE INFO:
BT ADDR: FF:FF:FF:FF:FF:FF
SW IMEI[0]: 867302-03-174587-2
SW IMEI[1]: 867302-03-174587-0
SW IMEI[2]: 867400-02-031663-8
SW IMEI[3]: 867400-02-031664-6

SIMLOCK FLAG: OFF

Done;

SLOCK repaired; Remove battery and cable;


Now, SIM Unlock is Done


Searching phone;
For an successful connection do the following:
1. Connect the phone powered off with the battery inside to the usb cable
Phone detected (@oem276.inf,%usbcomm_dl%;SPRD U2S Diag)
Preparing to sync;
Port opened [COM20];
Entering diagnostic mode;
Done;
Chip type: 6B4C:5300

Platform Version: MOCORTM_15C_W17.39.2_P1.03_Debug
Project Version: sc983x_cp1
BASE Version: FM_BASE_15C_W17.39.2_P1.03
HW Version: sc983x_modem
12-22-2017 21:57:31
Build number: sp9832a_2h11_orange-user 7.0 NRD90M eng.jinjiy.20180412.165739 release-keys
PHONE INFO:
BT ADDR: FF:FF:FF:FF:FF:FF
SW IMEI[0]: 867302-03-174587-2
SW IMEI[1]: 867302-03-174587-0
SW IMEI[2]: 867400-02-031663-8
SW IMEI[3]: 867400-02-031664-6

SIMLOCK FLAG: ON

SIM_LOCK TYPE: 2

IMEI: 867302-03-174587-2 UNLOCK CODE: 60299204


Code reading finished; Remove battery and cable;


Thanks FuriousGOLD for steadily focusing on Network Unlocks

[zineelhada]

huawei p 20 lite ANE-LX2 android frp done with test point

[radu_adriansv]

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM22))
Preparing to start flash mode;
Preparing to open COM22
Connecting;
Downloading DA;
Initializing;
Rid: 917e16f4ec40f14a2f0c49240b428ffc
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6737T [CA00, 00, 321, FF]
HW_STORAGE_EMMC: 0x422201F4 0x6E697769 0x00001120 0xDD654105 [SIZE=0x39AC00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x124000000 SIZE: 0x274F80000


Factory Reset Protection successfully removed !


Time needed - 00:00:00

Log file saved to: LOG_22_07_2019_11_02_36.txt

[russianz64]

OTSmart_v1.0.0.3475

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM24))
Preparing to start flash mode;
Preparing to open COM24
Requesting authorization;
Connecting;
Downloading DA;:
Initializing;
Rid: 437b5c98a54e410ed76820943c04632d
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6739 [CB00, 02, 6739, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333644 0x0B700142 0x757551AA [SIZE=0x749400000]
IMEI1 [OTP 0001]: 015246-00-000000-0
IMEI2 [OTP 0001]: 000000-00-000000-0
PROVIDER: 5052W-2ATBUSE
USRDATA INFO: 0x133800000 SIZE: 0x6108FBE00



Searching data;
Checking server support license;
Bruteforcing ... relax ;-)
Buteforce took 00:00:00
Checking data integrity;
Data integrity: OK;
SIM_LOCK: PARTIAL_UNLOCK
Rebuilding security;

Phone unlocked; Remove battery and cable;

Time needed - 00:00:03

[maxpatri9]

FROM DOMINICAN REPUBLIC WITH LOVE

Fly Captain Huawei Resurrector 0.0.0.34
user:57A96656

Device detected:
COM113: HUAWEI USB COM 1.0 (COM113)
BOOTLOADER File to update: Kirin659_T0_A8.0_V1
24/07/2019 06:09:35 p.m. Starting to write device...

Process identifier:4554870


Writing bootloader...
Writing Kirin659_T0_A8.0_V1_3.dtwork...
Writing Kirin659_T0_A8.0_V1_4.dtwork...

Waiting for fastboot device...
Device found: V3X5T18615000221


Looking for a device in fastboot mode
Device found: V3X5T18615000221


Getting IMEI...
Getting build number...
Getting model ...
Getting battery state...
Getting backdoor info...
Getting lock state info...
Getting lock boot info...

SN:V3X5T18615000221
IMEI:86622503744

IMEI1:000000000000000

MEID:00000000000000
Build number: :RNE-L03 8.0.0.353(C25)
Model: RNE-L03
Battery state: 0
OEM lock state info:
FB LockState: UNLOCKED
USER LockState: LOCKED
OEM get bootinfo:
unlocked


Unlocking FRP...
Writing FRP partition
FRP partition UPDATE :FAIL partition error
Writing FRP partition
FRP partition UPDATE ...OK
Software written
24/07/2019 06:10:15 p.m. Writing device finished OK

[Mr_F10ch3]

Alcatel 5008R from Criket..

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM95))
Preparing to start flash mode;
Preparing to open COM95
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 170396ff4ef064915bb6c8a708d4c944
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
DEVICE INFO:
BB CHIP: MT6739 [CB00, 02, 6739, 00]
HW_STORAGE_EMMC: 0x51000115 0x4D333644 0xE3420142 0xEB1666D3  [SIZE=0x749400000]
IMEI1 [OTP 0001]: 015320-00-xxxxx-9
IMEI2 [OTP 0001]: 000000-00-000000-0
PROVIDER: 5008R-2ARKUS7
USRDATA INFO: 0x165000000 SIZE: 0x5DF0FBE00



Searching data;
Checking server support license;
Bruteforcing ... relax ;-)
Buteforce took 00:00:00
Checking data integrity;
Data integrity: OK;
SIM_LOCK: PARTIAL_UNLOCK
Rebuilding security;

Phone unlocked; Remove battery and cable;

Time needed - 00:00:04

Log file saved to: LOG_25_07_2019_15_00_25.txt

NOTE: For the criket version you need read the SERIAL number with any other tool that let you read it, personally i read it with xtc2clip

[usman0000]

Searching phone;
For an successful connection do the following:
1. Connect the phone powered off with the battery inside to the usb cable
Phone detected (@oem17.inf,%usbcomm_dl%;SPRD U2S Diag)
Preparing to sync;
Port opened [COM50];
Entering diagnostic mode;
Done;
Chip type: 0000:0000

Platform Version: MOCORTM_17C_W18.23.4_P9_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.23.4_P9
HW Version: sc7731e_modem
10-13-2018 10:47:12
Build number: sp7731e_1h20_celc-user 8.1.0 OPM2.171019.012 43411 release-keys
PHONE INFO:
BT ADDR: FF:FF:FF:FF:FF:FF
SW IMEI[0]: 352478-10-004592-3
SW IMEI[1]: 352478-10-004593-1
SW IMEI[2]: 867400-02-031663-8
SW IMEI[3]: 867400-02-031664-6

SIMLOCK FLAG: ON

SIM_LOCK TYPE: 3

IMEI: 352478-10-004592-3 UNLOCK CODE: 86510913

Done;

Phone unlocked; Remove battery and cable;

Log file saved to: LOG_27_07_2019_14_38_23.txt


Time needed - 00:00:08

[alminkad]

Huawei p 20 lite frp done


Fly Captain Huawei Resurrector 0.0.0.34
user:8CED21CA

Device detected:
COM202: HUAWEI USB COM 1.0 (COM202)
BOOTLOADER File to update: Kirin659_T0_A8.0_V1
29.7.2019. 2:47:25 Starting to write device...

Process identifier:4563775


Writing bootloader...
Writing Kirin659_T0_A8.0_V1_3.dtwork...
Writing Kirin659_T0_A8.0_V1_4.dtwork...

Waiting for fastboot device...
Device found: 9WV7N19426003267


Looking for a device in fastboot mode
Device found: 9WV7N19426003267


Getting IMEI...
Getting build number...
Getting model ...
Getting battery state...
Getting backdoor info...
Getting lock state info...
Getting lock boot info...

SN:9WV7N19426003267
IMEI:8687570xxxxxxxx

IMEI1:8687570xxxxxxxx

MEID:00000000000000
Build number: :ANE-LX1 9.1.0.147(C432E5R1P7)
Model: ANE-LX1
Battery state: 0
OEM lock state info:
FB LockState: UNLOCKED
USER LockState: LOCKED
OEM get bootinfo:
unlocked


Unlocking FRP...
Writing FRP partition
FRP partition UPDATE :FAIL partition error
Writing FRP partition
FRP partition UPDATE ...OK
Software written
29.7.2019. 2:48:04 Writing device finished O