FuriousGold Successfully Unlocked / Repaired / Flashed Phones !!!

[bright hlatini]

HUAWEI LUA U22 FRP UNLOCK DONE

Searching phone...
(insert the USB cable in the powered off phone)
Phone detected (MediaTek PreLoader USB VCOM (Android))
Preparing to start MTK debug mode;
Searching for debug port... (be sure drivers from support were installed!)
MTK debug mode entered
Baseband Chip: MT6582,S01
Sw version:
Hw Version: ALPS.L1.MP12.V1.2_WT6582.WE.SH.L1_P29

Baseband Chip: MT6582, E01
Sw version: MOLY.WR8.W1449.MD.WG.MP.V32.P10
Hw Version: WT6582_WE_SH_L1_HSPA_HW
Reading info...
IMEI 1: 862XXXXXXXXXX
IMEI 2: 862XXXXXXXXXX
Open port success!
2017-07-30 12:08:20.993 Reading data from server...
2017-07-30 12:08:21.533 Reading data from server success!
FRP KEY read success!

FRP KEY: 89940ABCD823ECDA

Use this command for unlock FRP:
Fastboot oem frp-unlock 89940ABCD823ECDA

[maxpatri9]

alcatel 5054o unlock done
Connect the phone powered off with both volume down and up pressed or connect the phone powered off and leave it connected to the usb till it shows the battery/charging screen ;
Phone detected (@oem83.inf,%qcomdevice90080%;Qualcomm HS-USB QDLoader 9008)
Preparing to start flash mode;
Preparing to open COM36
Connecting;
Loading;
Init;
Port opened;
Hello Received;
BOOT Loaded;
Getting config;
Getting mem info;
Found an eMMC memory 22CD

IMEI: 01455600120793-0
PTH: 13
PTS: GAF
PROV_ID: 5054O-2KRKUS3-R
SBTADDR: F0:34:04:FD:33:7D
SWIFIADDR: F0:34:04:FD:81:14
HS_PN: SAA35HPAA10C
SSN: F1KG09CF9IZ003K

Work id: 031BAE56
Done;
Stype: 00000001
SECURITY: X8G0UC00BR10 Size: 000002BF
Backup saved to: 01455600120793-0
Unlocking;
SIM_LOCK REMOVED !

Log file saved to: LOG_31_07_2017_16_38_53.txt

Time needed - 00:00:31

[maxpatri9]

alcatel 4060a unlock done x 2

Connect the phone powered off with both volume down and up pressed or connect the phone powered off and leave it connected to the usb till it shows the battery/charging screen ;
Phone detected (@oem83.inf,%qcomdevice90080%;Qualcomm HS-USB QDLoader 9008)
Preparing to start flash mode;
Preparing to open COM36
Connecting;
Loading;
Init;
Port opened;
Hello Received;
BOOT Loaded;
Getting config;
Getting mem info;
Found an eMMC memory 22CD

IMEI: 01469900459204-7
PTH: 04
PTS: M5K
PROV_ID: 4060A-2AAQUS3-R1
SBTADDR: 28:BE:03:03:F2:B5
SWIFIADDR: 28:BE:03:05:EE:CC
HS_PN: SAA1GY0WA10C
SSN: 48KB08CIIKZ049F

Work id: 074F43C8
Done;
Stype: 00000001
SECURITY: X1M0UA02CL10 Size: 000002D4
Backup saved to: 01469900459204-7
Unlocking;
SIM_LOCK REMOVED !

Log file saved to: LOG_31_07_2017_16_12_53.txt

Time needed - 00:00:31

Connect the phone powered off with both volume down and up pressed or connect the phone powered off and leave it connected to the usb till it shows the battery/charging screen ;
Phone detected (@oem83.inf,%qcomdevice90080%;Qualcomm HS-USB QDLoader 9008)
Preparing to start flash mode;
Preparing to open COM36
Connecting;
Loading;
Init;
Port opened;
Hello Received;
BOOT Loaded;
Getting config;
Getting mem info;
Found an eMMC memory 22CD

IMEI: 01469900459213-8
PTH: 04
PTS: M5K
PROV_ID: 4060A-2AAQUS3-R1
SBTADDR: 28:BE:03:00:BED
SWIFIADDR: 28:BE:03:0A:5D:63
HS_PN: SAA1GY0WA10C
SSN: 48KB08CIIKZ030T

Work id: 074F4E51
Done;
Stype: 00000001
SECURITY: X1M0UA02CL10 Size: 000002D4
Backup saved to: 01469900459213-8
Unlocking;
SIM_LOCK REMOVED !

Log file saved to: LOG_31_07_2017_16_14_25.txt

Time needed - 00:00:30

[nae]

Searching phone...
(insert the USB cable in the powered off phone)
Phone detected (MediaTek PreLoader USB VCOM (Android))
Preparing to start MTK debug mode;
Searching for debug port... (be sure drivers from support were installed!)
MTK debug mode entered
Baseband Chip: MT6735,S01
Sw version:
Hw Version: ALPS.L1.MP3.V2_ONTIM6735.66T.L1_P73

Baseband Chip: MT6735, E00
Sw version: MOLY.LR9.W1444.MD.LWTG.MP.V16.P24.T2
Hw Version: ONTIM6735_65C_L1_HW
Reading info...
IMEI 1: 861249030xxxxxx
IMEI 2: 861249035xxxxxx

Open port success!
2017-08-01 15:04:04.873 Reading data from server...
2017-08-01 15:04:05.216 Reading data from server success!
FRP KEY read success!

FRP KEY: fa0586a302652114

Use this command for unlock FRP:
Fastboot oem frp-unlock fa0586a302652114

[maxpatri9]

huawei y538 unlock done
2017-08-01 10:42:22.359 Autodetect started!
2017-08-01 10:42:23.264 Found COM port: COM108
2017-08-01 10:42:24.264 Start read phone info!
2017-08-01 10:42:24.264 Open port COM108 (DBAdapter Reserved Interface (COM108))...
2017-08-01 10:42:24.373 Phone authorize start
2017-08-01 10:42:24.373 Phone authorize success!
2017-08-01 10:42:24.389 Read secure info...
2017-08-01 10:42:24.514 Read basic info...
2017-08-01 10:42:24.529 Detect phone done!

Model: HUAWEIY538_A1
MEID: 86726002476848
pESN: 80305013
IMEI: 867260024768485
IMEI 0: 867260024768485
Firmware ver.: MSM8909C237B150_AMSS Dec 18 201506:44:29
SN: URX0215C21039530
Custom SN: 023CPU15CN010514
WiFi MAC: 74:A5:28:FF:40:79
BlueTooth MAC: 74:A5:28:FF:46:BA
Vendor: sprint
Country: us
SL: 00000000
Y538C237B150_BOOT
MSM8909C237B150_AMSS Dec 18 201506:44:29
Y538-C00B023_EFS_RFNV_C09
HL1Y538A1M
Y538C237B150_APPSBOOT
Y538C237B150_KERNEL
Y538C237B150_SYSTEM
Y538C237B150_RECOVERY
MSM8909
HUAWEI Y538_A1
C237
D150
MSM8909_Y538_A1_

IMEI 1 Sim Lock status:
NET: unknown
NETSUB: unknown
SP: unknown

2017-08-01 10:42:27.589 Autodetect started!
2017-08-01 10:42:28.447 Found COM port: COM108
2017-08-01 10:42:28.463 Open port COM108 (DBAdapter Reserved Interface (COM108))...
2017-08-01 10:42:28.587 Connecting to server...
2017-08-01 10:42:30.225 Connected!
2017-08-01 10:42:30.241 Read data from server...
2017-08-01 10:42:31.850 Read data from server success!
2017-08-01 10:42:31.990 Phone authorize start
2017-08-01 10:42:35.861 Phone authorize success!
2017-08-01 10:42:35.877 Read secure info...
2017-08-01 10:42:36.001 Read secure info success!
2017-08-01 10:42:36.017 Read basic info...
2017-08-01 10:42:36.048 Read basic info success!
2017-08-01 10:42:36.048 Unlocking start
2017-08-01 10:42:36.079 Reading secure data from server...
2017-08-01 10:42:38.513 Reading secure data from server success!
2017-08-01 10:42:39.059 Unlock done!
2017-08-01 10:42:39.090 Job finished!

[jon123]

Myria Fancy MY9007
Frp reset ok,
Otsmart, select Wiko fever 4g

Downloading DA;
Initializing;
Rid: d1ed8bcee13d4e5ed71faf43d141bfc3
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem131.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM17;
DEVICE INFO:
BB CHIP: MT6580_S00 [CA00, 00, 6580, FF]
HW_STORAGE_EMMC: 0x45000170 0x45433848 0xC4100138 0x6F937049 [SIZE=0x1C8C00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x59800000 SIZE: 0x6F400000


Factory Reset Protection successfully removed !


Time needed - 00:00:00

Log file saved to: LOG_2_08_2017_21_09_39.txt

[maxpatri9]

alcatel 4060w frp and unlock done
Connect the phone powered off with both volume down and up pressed or connect the phone powered off and leave it connected to the usb till it shows the battery/charging screen ;
Phone detected (@oem83.inf,%qcomdevice90080%;Qualcomm HS-USB QDLoader 9008)
Preparing to start flash mode;
Preparing to open COM36
Connecting;
Loading;
Init;
Port opened;
Hello Received;
BOOT Loaded;
Getting config;
Getting mem info;
Found an eMMC memory 22CD

IMEI: 01472400219923-9
PTH: 10
PTS: P5G
PROV_ID: 4060W-2AWFUS1-R
SBTADDR: 4C:4E:03:0D:918
SWIFIADDR: 4C:4E:03:30:E8:6D
HS_PN: SAA1HA0AA00C
SSN: R9KB12COSFA00DG

Bruteforcing data; This operation can take up to 30 minutes !!!
Done;
Work id: 0B000491
Done;
Stype: 00000001
SECURITY: X3P0UW04CL10 Size: 000002B7
Backup saved to: 01472400219923-9
Unlocking;
SIM_LOCK REMOVED !
FRP has been Reset Successfully;
Erase Setup Done;
Erase Done;
Erase Done;
Erase Done;
FRPEx Done;

Log file saved to: LOG_2_08_2017_14_26_45.txt

Time needed - 00:13:16

[maxpatri9]

alcatel 5054n frp done
Connect the phone powered off with both volume down and up pressed or connect the phone powered off and leave it connected to the usb till it shows the battery/charging screen ;
Phone detected (@oem83.inf,%qcomdevice90080%;Qualcomm HS-USB QDLoader 9008)
Preparing to start flash mode;
Preparing to open COM36
Connecting;
Loading;
Init;
Port opened;
Hello Received;
BOOT Loaded;
Getting config;
Getting mem info;
Found an eMMC memory 22CD

IMEI: 01445100511881-4
PTH: 16
PTS: D6U
PROV_ID: 5054N-2AE4US1
SBTADDR: 1C:CB:994:C2:C5
SWIFIADDR: 1C:CB:994:C2:C6
HS_PN: SAA35HAAA10C
SSN: 2VKF08CLIOY005C

Work id: 02DB9CE1
Done;
Stype: 00000001
SECURITY: X8C0LS01BR20 Size: 000002A5
Backup saved to: 01445100511881-4
Unlocking;
SIM_LOCK REMOVED !
FRP has been Reset Successfully;
Erase Setup Done;
Erase Done;
FRPEx Done;

Log file saved to: LOG_2_08_2017_16_28_43.txt

Time needed - 00:00:33

[mason2you]

Cubot rainbow 2 , Android 7, MTK6580, frp done , select Myria grand
Using library Brom_DLL_v7.1522.2
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (PreLoader USB VCOM Port (COM15))
Preparing to start flash mode;
Preparing to open COM15
Connecting;
Downloading DA;
Initializing;
Rid: 46dc23a8e2712d053ce0aa407e8434f0
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (DA USB VCOM Port)
TRYING TO OPEN COM103;
DEVICE INFO:
BB CHIP: MT6580_S00 [CA00, 00, 6580, FF]
HW_STORAGE_EMMC: 0x46000115 0x4D323145 0xDCF10D42 0x7B149CF0 [SIZE=0x3A4A00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x59800000 SIZE: 0x60000000


Factory Reset Protection successfully removed !


Time needed - 00:00:00

Log file saved to: LOG_3_08_2017_12_19_50.txt

nd

[Unlocker_001]

BEELINE SMART 6 & MEDIACOM G510 FRP DONE ! PACK6 > OTSMART > WIKO LENNY2 !

Using library Brom_DLL_v7.1522.2
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (PreLoader USB VCOM Port (COM3))
Preparing to start flash mode;
Preparing to open COM3
Connecting;
Downloading DA;
Initializing;
Rid: 4e80ff2ec81c2d97f99cc5813bbcac55
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (DA USB VCOM Port)
TRYING TO OPEN COM4;
DEVICE INFO:
BB CHIP: MT6572_S00 [CA00, 00, 6572, FF]
HW_STORAGE_EMMC: 0x484A0190 0x61324734 0xA3450211 0xE9530CC0 [SIZE=0xE9C00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x59800000 SIZE: 0x60000000


Factory Reset Protection successfully removed !


Time needed - 00:00:00

Log file saved to: LOG_4_08_2017_11_34_59.txt

[totmititelu]

cu flycapitan v154 nu am putut ca e vazut ca virus si il inchide antivirusul!!!
cu versiunea 152 il vede ca si WAS-L01 dar el este WAS LX1, si l-a decodat


04.08.2017 14:56:31
FlyCaptain Huawei Module v2.0.0.0152 Furious Gold Pack 7
Dongle S/N:

Before detection connect cable to usb and enable Manufacture mode !

Qualcomm and HiSilicon: *#*#2846579#*#*
MTK: *#*#14789632#*#*
Windows: ##2846579#

ProjectMenu
1.Background setting
2.USB ports setting
Select Manufacture mode (for MTK other/debug mode)

2017-08-04 14:56:35.453 Autodetect started!
2017-08-04 14:56:37.515 Found COM port: COM519
2017-08-04 14:56:38.750 Start read phone info!
2017-08-04 14:56:38.750 Open port COM519 (Android Adapter PCUI (COM519))...
2017-08-04 14:56:39.890 Phone authorize start
2017-08-04 14:56:39.984 Connecting to server...
2017-08-04 14:56:40.781 Connected!
2017-08-04 14:56:40.781 Read data from server...
2017-08-04 14:56:43.281 Read data from server success!
2017-08-04 14:56:45.937 Phone authorize success!
2017-08-04 14:56:45.937 Read basic info...
2017-08-04 14:56:47.281 Read secure info...
2017-08-04 14:56:56.203 Detect phone done!

Model: WAS-L01
MEID: 00000000000000
pESN: 00000000
IMEI: 86403803178xxx
IMEI 0: 000000000000000
IMEISV: 14
Firmware ver.: NRD90M test-keys
SN: PAG4C17615000470
Custom SN: 4C3YLR176E015131
WiFi MAC: 50:04:B8:0A:40:C8
BlueTooth MAC: 50:04:B8:0A:45:A6
Vendor: vodafone
Country: ro
FASTBOOT:Chipset-dallas 5.1.0.1(04BO)_FASTBOOT
BOOTallas-Trunk_BOOT
RECOVERYunknow)
SYSTEM:System 5.1.0.63(0EHB)
MAINVER:NRD90M test-keys
DATAVER:WAS-LX1C02B114_DATA_WAS-L01_vodafone_default
APTIME:Tue Mar 28 16:30:35 CST 2017
RAM: 3G
eMMC: 32G

IMEI 1 Sim Lock status:
NET: locked, unlock retry counts: 10
NETSUB: unlocked
SP: unlocked

2017-08-04 14:57:03.078 Autodetect started!
2017-08-04 14:57:07.171 Found COM port: COM519
2017-08-04 14:57:07.171 Open port COM519 (Android Adapter PCUI (COM519))...
2017-08-04 14:57:07.281 Connecting to server...
2017-08-04 14:57:08.046 Connected!
2017-08-04 14:57:08.046 Read data from server...
2017-08-04 14:57:10.234 Read data from server success!
2017-08-04 14:57:10.515 Phone authorize start
2017-08-04 14:57:12.640 Phone authorize success!
2017-08-04 14:57:12.640 Read secure info...
2017-08-04 14:57:21.437 Read secure info success!
2017-08-04 14:57:21.437 Read basic info...
2017-08-04 14:57:25.296 Read basic info success!
2017-08-04 14:57:25.296 Unlocking start
2017-08-04 14:57:25.296 Phone secure identify start
2017-08-04 14:57:27.968 Phone secure identify success!
2017-08-04 14:57:27.984 Reading data from server...
2017-08-04 14:57:28.718 Reading data from server success!
2017-08-04 14:57:30.765 Unlock done!
2017-08-04 14:57:30.781 Job finished!

[theboy]

Using library Brom_DLL_v7.1712.1
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM60))
Preparing to start flash mode;
Preparing to open COM60
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 9577741df81e93792c56e9b473b134d5
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem69.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM30;
DEVICE INFO:
BB CHIP: MT6737M [CA00, 00, 335, 05]
HW_STORAGE_EMMC: 0x51000115 0x42363133 0xD7660142 0xFD1422EE [SIZE=0x3A4A00000]
IMEI1 [OTP 0001]: 354032-08-049551-3
IMEI2 [OTP 0001]: 000000-00-000000-0
PROVIDER: V610-2BVDPT1
USRDATA INFO: 0x113000000 SIZE: 0x28D280000



Searching data;


Locked to [SIM1]: 268-01
code_cat_n: 7170039758131459 enabled: yes tries: 10
code_cat_ns: 6384608716074688 enabled: no tries: 10
code_cat_sp: 9853193961812857 enabled: no tries: 10
code_cat_c: 3324557978280480 enabled: no tries: 10
code_cat_sim: 6959334387769542 enabled: no tries: 10
code_cat_ns_sp: 0636990501845280 enabled: no tries: 5
code_cat_sim_c: 3949699130887454 enabled: no tries: 5

Phone unlocked; Remove battery and cable;

Time needed - 00:00:04

Log file saved to: LOG_4_08_2017_15_03_59.txt

[maxpatri9]

alcatel 5054o unlock done
Connecting;
Check your phone and "Always allow from this computer" and select "OK".
Connected;
BRAND: TCL
MODEL: ALCATEL_5054O
ANDROID: v5.1.1
CPU: QCOM
IMEI: NA
KERNEL: Linux version 3.10.49-gaa8044f-00016-g351b091 (android-bld@bld84) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Sat Apr 1 15:36:40 CST 2017
Cleaning;
Loading files;
Done;
Reconnecting;
Getting memory info;
Done;
Gathering info;
Done;
Cleaning done;
Setting permissions;
Reading data;
Getting data size;
00001241 bytes
Decompressing;
IMEI: 014556000915061
PTH: 13
PTS: GAF
PROV_ID: 5054O-2KRKUS3-R
SBTADDR: F0:34:04:41:BE:84
SWIFIADDR: F0:34:04:41:BE:85
HS_PN: SAA35HPAA10C
SSN: F1KG07CNEGZ00VH

Getting data size;
00854495 bytes
Decompressing;
Mounting the partition;
Done;
WARNING: Lower then;
Done;
Done;
Getting data size;
00001790 bytes
Decompressing;
Bruteforcing data; This operation can take up to 30 minutes !!!
Done;
Work id: 047F300C
Calculating security;
Calc 0000 ;
Calc 0001 ;
Calc 0002 ;
Calc 0003 ;
SIM_LOCK REMOVED !

Log file saved to: LOG_4_08_2017_14_37_02.txt

Time needed - 00:05:47

[maxpatri9]

ALCATEL 5065N UNLOCK DONE
Connect the phone powered off with both volume down and up pressed or connect the phone powered off and leave it connected to the usb till it shows the battery/charging screen ;
Phone detected (@oem83.inf,%qcomdevice90080%;Qualcomm HS-USB QDLoader 9008)
Preparing to start flash mode;
Preparing to open COM36
Connecting;
Loading;
Init;
Port opened;
Hello Received;
BOOT Loaded;
Getting config;
Getting mem info;
Found an eMMC memory 22CD

IMEI: 01470500177837-0
PTH: 03
PTS: N5S
PROV_ID: 5065N-2CE4US1
SBTADDR: 28:BE:03:22:26:5E
SWIFIADDR: 28:BE:03:2A:15:A1
HS_PN: SAA34NBAA10C
SSN: 98KJ10BDLKZ03LE

Work id: 068A244C
Done;
Stype: 00000001
SECURITY: X2N0UP00CL10 Size: 000002C3
Backup saved to: 01470500177837-0
Unlocking;
SIM_LOCK REMOVED !

Log file saved to: LOG_4_08_2017_18_14_05.txt

Time needed - 00:00:33

[maxpatri9]

zte z221 unlock done
Software engine version: 1.0.0.10527
Searching phone ...

MODEL : QCOM SERIES 10
COMPILED DATE : Aug 8 2011 19:45:00
RELEASE DATE : Apr 19 2011 08:00:00
FIRMWARE INFO : ATT_AM_P671B40V1.0.0B09-S
IMEI : 35661304486993-1
BLUETOOTH ADDR : 59 44 A5 B2 1A 68


INIT NAND ROUTINES;
NAND INIT MADE;
PHONE CODE: 0000

READING;
CALCULATING;
BEFORE BACKUP: 0D0A2225DBA14CB738A8889040C1E0E9.bin
ERASING;
WRITING;
READING;
AFTER BACKUP: F463B9ABAEE7EA22D755811B2614650B.bin
UNLOCKED;
RESET !

Log file saved to: LOG_7_08_2017_13_12_10.txt

Time needed - 00:00:07