FuriousGold Successfully Unlocked / Repaired / Flashed Phones !!!

[mysterious guy]

thanks hack.....


Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off with volume down and up pressed to the usb cable]
Phone detected (MTK USB Port (COM33))
Preparing to start flash mode;
Preparing to open COM33
Connecting;
Downloading DA;
Initializing;
Rid: cd401672304b0d97b21074732a12cfe8
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem267.inf,%mtk_sp_da%;DA USB VCOM Port)
TRYING TO OPEN COM19;
DEVICE INFO:
BB CHIP: MT6580 [CA00, 00, 6580, 05]
HW_STORAGE_EMMC: 0x45000170 0x44453445 0xBF130134 0xFB75F817 [SIZE=0xE2480000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x74800000 SIZE: 0x69C80000



Searching data;


Locked to [SIM1]: 460-01
code_cat_n: 12345678 enabled: yes tries: 2
code_cat_ns: 56781234 enabled: no tries: 5
code_cat_sp: 11112222 enabled: no tries: 5
code_cat_c: 33334444 enabled: no tries: 5
code_cat_sim: 55556666 enabled: no tries: 5
code_cat_ns_sp: 77778888 enabled: no tries: 5
code_cat_sim_c: 99990000 enabled: no tries: 5

Phone unlocked; Remove battery and cable;

Time needed - 00:00:07

Log file saved to: LOG_7_12_2018_15_01_23.txt

[rajesh_ch]

hauwei Y625-U51 unlocking done..........
thanks furious-team

[maxpatri9]

alcatel 5099a frp done

Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM44))
Preparing to start flash mode;
Preparing to open COM44
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: d8c6892f3463150e025b6dac2de90544
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem225.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM42;
DEVICE INFO:
BB CHIP: MT6737T [CA00, 00, 321, 05]
HW_STORAGE_EMMC: 0x51000115 0x4D333645 0x675E0342 0xB19434D8 [SIZE=0x3A4A00000]
IMEI1 [OTP 0000]: 015106-00-010365-3
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 5099A-2BRGDO1
USRDATA INFO: 0xEE000000 SIZE: 0x2B2280000


Factory Reset Protection successfully removed !


Time needed - 00:00:00

Log file saved to: LOG_8_12_2018_11_56_44.txt

[..::GMSR::..]

12/10/2018 1:00:48 PM
FlyCaptain Huawei Module v2.0.0.0182 Furious Gold Pack 7
Dongle S/N: 882575AC

Before detection connect cable to usb and enable Manufacture mode !

Qualcomm and HiSilicon: *#*#2846579#*#*
MTK: *#*#14789632#*#*
Windows: ##2846579#

ProjectMenu
1.Background setting
2.USB ports setting
Select Manufacture mode (for MTK other/debug mode)

2018-12-10 13:01:05.698 Autodetect started!
2018-12-10 13:01:06.331 Found COM port: COM240
2018-12-10 13:01:06.337 Open port COM240 (Android Adapter PCUI (COM240))...
2018-12-10 13:01:06.444 Start read phone info!
2018-12-10 13:01:07.456 Connecting to server...
2018-12-10 13:01:09.798 Connected!
2018-12-10 13:01:09.801 Read data from server...
2018-12-10 13:01:12.039 Read data from server success!
2018-12-10 13:01:26.534 CP State: ready
2018-12-10 13:01:26.539 Read phone basic info...
2018-12-10 13:01:27.986 Read phone secure info...
2018-12-10 13:01:36.488 Detect phone done!

Model: VTR-L09
MEID: 86554503081965
pESN: 80660727
IMEI: 865545030819658
IMEI 0: 865545030819658
IMEISV: 61
Firmware ver.: NRD90M test-keys
SN: 6PQ0217821000252
Custom SN: 024ATC178K004964
WiFi MAC: B0:E5:ED:B9:15:02
BlueTooth MAC: B0:E5:ED:B9:19:CB
Vendor: vodafone
Country: za
FASTBOOT:Chipset-chicago-pcie 5.1.0.6(0N64)_FASTBOOT
BOOT:Chipset-chicago-pcie 5.1.0.6(0N64)_BOOT
RECOVERYunknow)
SYSTEM:System 5.1.0.63(14UN)
MAINVER:NRD90M test-keys
DATAVER:VTR-L09C02B161_DATA_VTR-L09_vodafone_default
APTIME:Wed Dec 27 23:19:51 CST 2017
RAM: 4G
eMMC: 64G

IMEI 1 Sim Lock status:
NET: unlocked
NETSUB: unlocked
SP: unlocked

2018-12-10 13:02:26.622 Autodetect started!
2018-12-10 13:02:27.226 Found COM port: COM240
2018-12-10 13:02:28.321 Repairing start
New MEID : 86567897545455
2018-12-10 13:02:29.351 Connecting to server...
2018-12-10 13:02:33.215 Connected!
2018-12-10 13:02:33.222 Read data from server...
2018-12-10 13:02:34.963 Read data from server success!
2018-12-10 13:02:34.968 Open COM port COM240 (Android Adapter PCUI (COM240))...
2018-12-10 13:02:40.139 CP State: ready
2018-12-10 13:02:40.145 Read phone basic info...
2018-12-10 13:02:41.497 Read phone secure info...
2018-12-10 13:02:49.909 Read from server...
2018-12-10 13:02:50.721 Read from server success!
2018-12-10 13:02:51.339 Writing MEID...
2018-12-10 13:02:51.345 Read from server...
2018-12-10 13:02:51.833 Read from server success!
2018-12-10 13:02:54.144 Write MEID success!
2018-12-10 13:02:54.151 Synchronize NV...
2018-12-10 13:02:55.506 Synchronize NV success!
2018-12-10 13:02:55.516 Factory reset...
2018-12-10 13:02:58.052 Factory reset success!
2018-12-10 13:02:58.072 Finished!

2018-12-10 13:09:15.175 Erase FRP start
2018-12-10 13:09:19.619 Reading phone info...
2018-12-10 13:09:20.204 Read phone info success!
Model: VTR-L09
MEID: 86554503081965
pESN: 00000000
IMEI: 865545030819658
Firmware ver.: VTR-L09C02B161
SN: 6PQ0217821000252

2018-12-10 13:09:20.258 Reading Certify data...
2018-12-10 13:09:20.420 Reading Certify data success!
2018-12-10 13:09:20.428 Signing Certify data...
2018-12-10 13:09:26.072 Erase FRP done!

[..::GMSR::..]

12/10/2018 2:25:00 PM
FlyCaptain Huawei Module v2.0.0.0182 Furious Gold Pack 7
Dongle S/N: Dongle S/N: 882575AC

2018-12-10 14:29:16.359 Autodetect started!
2018-12-10 14:29:17.987 Found COM port: COM246
2018-12-10 14:29:17.991 Open port COM246 (Android Adapter PCUI (COM246))...
2018-12-10 14:29:18.107 Start read phone info!
2018-12-10 14:29:19.116 Connecting to server...
2018-12-10 14:29:20.681 Connected!
2018-12-10 14:29:20.687 Read data from server...
2018-12-10 14:29:22.566 Read data from server success!
2018-12-10 14:29:35.259 CP State: ready
2018-12-10 14:29:35.263 Read phone basic info...
2018-12-10 14:29:35.717 Read phone secure info...
2018-12-10 14:29:45.375 Detect phone done!

Model: FIG-L11
MEID: 00000000000000
pESN: 00000000
IMEI: 869012034746623
IMEI 0: 000000000000000
IMEISV: 32
Firmware ver.: System 8.0.0.046(0EDJ)
SN: HBEDU18727000414
Custom SN: DU4MBH187T046498
WiFi MAC: 7C:76:68:C0E:AD
BlueTooth MAC: 7C:76:68:C0:E6:A6
Vendor: vodafone
Country: za
FASTBOOT:Chipset-dallas8.0.0.001(031Y)_FASTBOOT
BOOT:System 8.0.0.046(0EDJ)_BOOT
RECOVERYunknow)
SYSTEM:System 8.0.0.046(0EDJ)
MAINVER:System 8.0.0.046(0EDJ)
DATAVER:FIG-LX1 8.0.0.133(C02)_DATA_FIG-L11_vodafone_default
APTIME:Tue Jul 10 18:00:22 CST 2018
RAM: 3G
eMMC: 32G

IMEI 1 Sim Lock status:
NET: unlocked
NETSUB: unlocked
SP: unlocked

2018-12-10 14:30:08.281 Autodetect started!
2018-12-10 14:30:09.889 Found COM port: COM246
Fixed IMEI CRC: 867887665565604
2018-12-10 14:30:09.932 Repairing start
New IMEI : 867887665565604
2018-12-10 14:30:10.876 Connecting to server...
2018-12-10 14:30:12.223 Connected!
2018-12-10 14:30:12.227 Read data from server...
2018-12-10 14:30:13.963 Read data from server success!
2018-12-10 14:30:13.972 Open COM port COM246 (Android Adapter PCUI (COM246))...
2018-12-10 14:30:20.921 CP State: ready
2018-12-10 14:30:20.926 Read phone basic info...
2018-12-10 14:30:21.563 Read phone secure info...
2018-12-10 14:30:31.195 Read from server...
2018-12-10 14:30:31.765 Read from server success!
2018-12-10 14:30:32.191 Repair IMEI 1 start!
2018-12-10 14:30:32.196 Phone secure identify start
2018-12-10 14:30:36.775 Phone secure identify success!
2018-12-10 14:30:36.785 Reading from server...
2018-12-10 14:30:38.590 Read from server success!
2018-12-10 14:30:39.573 Repair IMEI 1 Success!
2018-12-10 14:30:39.582 Synchronize NV...
2018-12-10 14:30:40.039 Synchronize NV success!
2018-12-10 14:30:40.047 Factory reset...
2018-12-10 14:30:43.588 Factory reset success!
2018-12-10 14:30:43.705 Finished!

[lyes_albert]

Files used available at support area: I216X-2[X=A,B,C]ALGN1
Full logs of the operation/

Using library Brom_DLL_v7.1413.5
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM156))
Preparing to start flash mode;
Preparing to open COM156
Connecting;
Downloading DA;
Initializing;
Rid: 1d51bab462a33d7d865f991f25bf9dc9
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver\x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem315.inf,%mtk_preloader%;PreLoader USB VCOM Port)
TRYING TO OPEN COM15;
DEVICE INFO:
BB CHIP: MT6582_S00 [CA00, 00, 6582, 05]
HW_STORAGE_EMMC: 0x30000111 0x45473430 0xDCA80230 0x2F32D4D6  [SIZE=0xEC480000]
IMEI1 [OTP 0001]: 865499-02-221472-8
IMEI2 [OTP 0001]: 000000-00-000000-0
PROVIDER: I216X-2AALDZ1-1
USRDATA INFO: 0x5F880000 SIZE: 0x66880000


Loading the file ...
Cfg done ...
Formatting file system now...
Done;
Downloading bootloader...
Done;
Downloading images...
Done;
Success;

Time needed - 00:04:30

Log file saved to: LOG_11_12_2018_10_42_12.txt

[lyes_albert]

Full logs of the operation/

Looking for a device in upgrade mode
COM429: Android Adapter PCUI (COM429)
COM430: DBAdapter Reserved Interface (COM430)

11/12/2018 20:59:04 Starting to write device in UPGRADE mode...
File to update: UPDATE.APP
Current version: EVA_C999B000EMUI5.0
Validating file...
Detecting port...
Preparing to write...
Writing file 1 of 27: SHA256RSA...OK
Writing file 2 of 27: CRC...OK
Writing file 3 of 27: CURVER...OK
Writing file 4 of 27: VERLIST...OK
Writing file 5 of 27: PACKAGE_TYPE...OK
Writing file 6 of 27: EFI...OK
Writing file 7 of 27: XLOADER...OK
Writing file 8 of 27: FW_LPM3...OK
Writing file 9 of 27: FASTBOOT...OK
Writing file 10 of 27: MODEMNVM_UPDATE...OK
Writing file 11 of 27: TEEOS...OK
Writing file 12 of 27: TRUSTFIRMWARE...OK
Writing file 13 of 27: SENSORHUB...OK
Writing file 14 of 27: FW_HIFI...OK
Writing file 15 of 27: BOOT...OK
Writing file 16 of 27: RECOVERY...OK
Writing file 17 of 27: RECOVERY2...OK
Writing file 18 of 27: DTS...OK
Writing file 19 of 27: MODEM...OK
Writing file 20 of 27: MODEM_DSP...OK
Writing file 21 of 27: 3RDMODEM...OK
Writing file 22 of 27: CACHE...OK
Writing file 23 of 27: SYSTEM...OK
Writing file 24 of 27: MODEM_DTB...OK
Writing file 25 of 27: VENDOR...OK
Writing file 26 of 27: PRODUCT...OK
Writing file 27 of 27: USERDATA...OK
Software written

11/12/2018 21:07:22 Starting to write device in UPGRADE mode...
File to update: update_EVA-L19_hw_meafnaf.app
Current version: EVA_C999B000EMUI5.0
Validating file...
Detecting port...
Preparing to write...
Writing file 1 of 9: SHA256RSA...OK
Writing file 2 of 9: CRC...OK
Writing file 3 of 9: CURVER...OK
Writing file 4 of 9: VERLIST...OK
Writing file 5 of 9: PACKAGE_TYPE...OK
Writing file 6 of 9: EFI...OK
Writing file 7 of 9: CUST...OK
Writing file 8 of 9: VERSION...OK
Writing file 9 of 9: USERDATA...
Writing file 9 of 9: USERDATA...OK
Software written
11/12/2018 21:11:37 Writing device finished OK

[jseyedanas]

Using library Brom_DLL_v7.1733.4
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port (COM142))
Preparing to start flash mode;
Preparing to open COM142
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 2096960856360035c71cd3ab12bf40e0
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem103.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM139;
DEVICE INFO:
BB CHIP: MT6737M [CA00, 00, 335, 05]
HW_STORAGE_EMMC: 0x51000115 0x42363133 0xA5C50142 0x2B74FECE [SIZE=0x3A4A00000]
IMEI1 [OTP 0001]: 354032-08-377181-1
IMEI2 [OTP 0001]: 000000-00-000000-0
PROVIDER: V610-2AVDPT1
USRDATA INFO: 0x113000000 SIZE: 0x28D280000


Factory Reset Protection successfully removed !


Time needed - 00:00:00

Log file saved to: LOG_11_12_2018_20_57_25.txt

[..::GMSR::..]

12/12/2018 12:35:09 PM
FlyCaptain Huawei Module v2.0.0.0182 Furious Gold Pack 7
Dongle S/N: Dongle S/N: 882575AC

2018-12-12 12:36:59.143 Autodetect started!
2018-12-12 12:36:59.923 Found COM port: COM40
2018-12-12 12:36:59.923 Open port COM40 (Android Adapter PCUI (COM40))...
2018-12-12 12:37:00.032 Start read phone info!
2018-12-12 12:37:01.078 Connecting to server...
2018-12-12 12:37:08.191 Connected!
2018-12-12 12:37:08.191 Read data from server...
2018-12-12 12:37:15.842 Read data from server fail!
2018-12-12 12:37:15.873 CP State: ready
2018-12-12 12:37:15.873 Read phone basic info...
2018-12-12 12:37:21.290 Read phone secure info...
2018-12-12 12:37:29.122 Detect phone done!

Firmware ver.: NRD90M test-keys
SN: BGVDU18410000432
Custom SN: DU4REV184F021780
Vendor: hw
Country: meafnaf
FASTBOOT:Chipset-dallas 5.0.0.1(0B8P)_FASTBOOT
BOOTallas-Release_B200_BOOT
RECOVERYunknow)
SYSTEM:System 5.0.0.57(0S8W)
MAINVER:NRD90M test-keys
DATAVER:PRA-LA1C185B171_DATA_PRA-L01_hw_meafnaf
APTIME:Thu Aug 3 12:30:07 CST 2017


2018-12-12 12:38:01.867 Autodetect started!
2018-12-12 12:38:04.582 Found COM port: COM40
Fixed IMEI CRC: 865434533334434
2018-12-12 12:38:05.752 Repairing start
New IMEI : 865434533334434
New IMEI 0 : 865554445544554
2018-12-12 12:38:06.677 Connecting to server...
2018-12-12 12:38:09.877 Connected!
2018-12-12 12:38:09.893 Read data from server...
2018-12-12 12:38:11.627 Read data from server success!
2018-12-12 12:38:11.627 Open COM port COM40 (Android Adapter PCUI (COM40))...
2018-12-12 12:38:16.821 CP State: ready
2018-12-12 12:38:16.821 Read phone basic info...
2018-12-12 12:38:18.522 Read phone secure info...
2018-12-12 12:38:27.545 Read from server...
2018-12-12 12:38:28.262 Read from server success!
2018-12-12 12:38:28.887 Repair IMEI 1 start!
2018-12-12 12:38:28.903 Phone secure identify start
2018-12-12 12:38:32.101 Phone secure identify success!
2018-12-12 12:38:32.116 Reading from server...
2018-12-12 12:38:34.051 Read from server success!
2018-12-12 12:38:35.303 Repair IMEI 1 Success!
2018-12-12 12:38:35.318 Repair IMEI 2 start!
2018-12-12 12:38:37.268 Reading from server...
2018-12-12 12:38:38.828 Read from server success!
2018-12-12 12:38:40.092 Repair IMEI 2 Success!
2018-12-12 12:38:42.011 Synchronize NV...
2018-12-12 12:38:42.604 Synchronize NV success!
2018-12-12 12:38:42.604 Factory reset...
2018-12-12 12:38:45.240 Factory reset success!
2018-12-12 12:38:45.256 Finished!

[asad_nomy7]

Movitel M6225 with counter blocked.after unlock same condition then i write patched firmware but no service then i write NV which backup when i unlock the set.now signal Ok.

[sunnny]

Thx fg team, i have done ZTE Z957 counter (0) reset done in new update .Here is the log file.

Software engine version: 1.0.0.10763
Searching phone ...

MODEL : QCOM SERIES 53
COMPILED DATE : Jun 22 2017 20:29:00
RELEASE DATE : Dec 27 2016 23:00:00
FIRMWARE INFO : MPSS.JO.1.2.c2-00115-8937_GENNS_PACK-1.82698.1
IMEI : 86284903000000-0
BLUETOOTH ADDR : 00 00 00 00 00 00

FIRMWARE: P817W01V1.0.0B11

close_event_report: OK;
close_log_report: OK;
close_message_report: OK;
closing_com_port: OK;
Starting the backup process;
connect_server: OK;
backup in progress: OK;
Backup saved to: E:\Furious-gold 1\PACK 5 LG\QCOM_SMART_TOOL_v1.0.0.10763\86284903000000_13_ 12_2018_18_05_35.bkp
switching_download_mode: OK;
closing_com_port: OK;
Preparing to open COM56
Connecting;
Loading;
Init;
Port opened;
Hello Received;
BOOT Loaded;
Getting config;
Getting mem info;
Found an eMMC memory 22D5
Looking for the interface;
Port found [ZTE Handset Diagnostic Interface (COM39)]
connect_server: OK;
restore in progress: OK;
SIM_LOCK REMOVED !

Log file saved to: LOG_13_12_2018_18_15_37.txt

Time needed - 00:08:05

[..::GMSR::..]

12/13/2018 4:32:58 PM
FlyCaptain Huawei Module v2.0.0.0182 Furious Gold Pack 7
Dongle S/N: 882575AC

Before detection connect cable to usb and enable Manufacture mode !

Qualcomm and HiSilicon: *#*#2846579#*#*
MTK: *#*#14789632#*#*
Windows: ##2846579#

ProjectMenu
1.Background setting
2.USB ports setting
Select Manufacture mode (for MTK other/debug mode)

2018-12-13 16:33:53.030 Start read phone info!
2018-12-13 16:33:54.186 Detect phone done!

Model: PRA-LX1
IMEI: 868779036235984
Firmware ver.: PRA-LX1C02B162
SN: 57U7N18608003451

IMEI1:000000000000000
FB LockState: LOCKED
USER LockState: LOCKED
locked
Battery state: 3978mv

2018-12-13 16:33:59.646 Erase FRP start
2018-12-13 16:34:04.360 Reading phone info...
2018-12-13 16:34:04.921 Read phone info success!
Model: PRA-LX1
IMEI: 868779036235984
Firmware ver.: PRA-LX1C02B162
SN: 57U7N18608003451

2018-12-13 16:34:04.952 Reading Certify data...
2018-12-13 16:34:05.124 Reading Certify data success!
2018-12-13 16:34:05.124 Signing Certify data...
2018-12-13 16:34:08.511 Erase FRP done!

2018-12-13 16:39:07.770 Autodetect started!
2018-12-13 16:39:08.487 Found COM port: COM180
Fixed IMEI CRC: 868756444540007
2018-12-13 16:39:09.657 Repairing start
New IMEI : 868756444540007
2018-12-13 16:39:10.593 Connecting to server...
2018-12-13 16:39:12.209 Connected!
2018-12-13 16:39:12.225 Read data from server...
2018-12-13 16:39:14.146 Read data from server success!
2018-12-13 16:39:14.146 Open COM port COM180 (Android Adapter PCUI (COM180))...
2018-12-13 16:39:19.200 CP State: ready
2018-12-13 16:39:19.200 Read phone basic info...
2018-12-13 16:39:20.885 Read phone secure info...
2018-12-13 16:39:29.873 Read from server...
2018-12-13 16:39:30.387 Read from server success!
2018-12-13 16:39:30.793 Repair IMEI 1 start!
2018-12-13 16:39:30.809 Phone secure identify start
2018-12-13 16:39:34.490 Phone secure identify success!
2018-12-13 16:39:34.490 Reading from server...
2018-12-13 16:39:36.440 Read from server success!
2018-12-13 16:39:37.501 Repair IMEI 1 Success!
2018-12-13 16:39:37.501 Synchronize NV...
2018-12-13 16:39:38.125 Synchronize NV success!
2018-12-13 16:39:38.125 Factory reset...
2018-12-13 16:39:40.793 Factory reset fail! AT command error
2018-12-13 16:40:00.332 Finished!

[..::GMSR::..]

12/14/2018 10:41:15 AM
FlyCaptain Huawei Module v2.0.0.0182 Furious Gold Pack 7
Dongle S/N: 882575AC

Before detection connect cable to usb and enable Manufacture mode !

Qualcomm and HiSilicon: *#*#2846579#*#*
MTK: *#*#14789632#*#*
Windows: ##2846579#

ProjectMenu
1.Background setting
2.USB ports setting
Select Manufacture mode (for MTK other/debug mode)

2018-12-14 10:41:29.690 Start read phone info!
2018-12-14 10:41:31.062 Detect phone done!

Model: ALE-L21
IMEI: 867811025496235
Firmware ver.: ALE-L21C02B589
SN: QLF7N15908004656

FB LockState: LOCKED
USER LockState: LOCKED
locked
Battery state: 5031mv

2018-12-14 10:42:10.762 Erase FRP start
2018-12-14 10:42:17.379 Reading phone info...
2018-12-14 10:42:18.284 Read phone info success!
Model: ALE-L21
IMEI: 867811025496235
Firmware ver.: ALE-L21C02B589
SN: QLF7N15908004656

2018-12-14 10:42:18.299 Reading Certify data...
2018-12-14 10:42:18.486 Reading Certify data success!
2018-12-14 10:42:18.486 Signing Certify data...
2018-12-14 10:42:24.681 Erase FRP done!

[maxpatri9]

zte z820 frp done
Using library Brom_DLL_v7.1813.3
Searching phone in normal mode;
[connect the phone powered off with volume up pressed to the usb cable]
Phone detected (MediaTek USB Port (COM44))
Preparing to start flash mode;
Preparing to open COM44
Connecting;
Downloading DA;
Initializing;
Rid: b47db65ca17d96c0fffc59e75e9e029a
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
DEVICE INFO:
BB CHIP: MT6735M [CA00, 00, 335, 05]
HW_STORAGE_EMMC: 0x484A0190 0x65314738 0x324D0705 0xDBA28958 [SIZE=0x1D2C00000]
IMEI1 [OTP 00FF]: 861489-03-083535-2
IMEI2 [OTP 00FF]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0xD6000000 SIZE: 0xF8480000


Factory Reset Protection successfully removed !


Time needed - 00:00:02

Log file saved to: LOG_14_12_2018_11_35_07.txt

[alminkad]

Alcatel OT 5099D unlock, successfully done.

Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MTK USB Port (COM11))
Preparing to start flash mode;
Preparing to open COM11
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 476c90fcfca15bbdd3038311f2621cbd
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (@oem92.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM173;
DEVICE INFO:
BB CHIP: MT6737T [CA00, 00, 321, 05]
HW_STORAGE_EMMC: 0x51000115 0x4D333645 0x42580342 0xCB94E4CC [SIZE=0x3A4A00000]
IMEI1 [OTP 0001]: 353936-09-xxxxxx-x
IMEI2 [OTP 0001]: 353936-09-xxxxxx-x
PROVIDER: 5099D-2ABHBA2
USRDATA INFO: 0xEE000000 SIZE: 0x2B2280000



Searching data;


Locked to [SIM1]: 218-90
code_cat_n: 9841521729231299 enabled: yes tries: 10
code_cat_ns: 9841521729231299 enabled: no tries: 0
code_cat_sp: 9841521729231299 enabled: no tries: 0
code_cat_c: 9841521729231299 enabled: no tries: 0
code_cat_sim: 9841521729231299 enabled: no tries: 0


Locked to [SIM2]: 218-90
code_cat_n: 1611789285003709 enabled: yes tries: 8
code_cat_ns: 1611789285003709 enabled: no tries: 0
code_cat_sp: 1611789285003709 enabled: no tries: 0
code_cat_c: 1611789285003709 enabled: no tries: 0
code_cat_sim: 1611789285003709 enabled: no tries: 0

Phone unlocked; Remove battery and cable;

Time needed - 00:00:14

Log file saved to: LOG_14_12_2018_20_39_38.txt