GSM-Forum - how to flash P920 (emergency mode)??? always empty battery with Furious

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- FuriousGold (https://forum.gsmhosting.com/vbb/f272/)

- - how to flash P920 (emergency mode)??? always empty battery with Furious (https://forum.gsmhosting.com/vbb/f272/how-flash-p920-emergency-mode-always-empty-battery-furious-1465413/)

how to flash P920 (emergency mode)??? always empty battery with Furious

phone powering off after LG animation logo

i've try with (LGFLASHTool_1.2.45.921) with this two versions

LGP920AT-00-V10f-EUR-XXX-AUG-12-2011+0_AP.bin
LGP920AT-00-V10k-EUR-XXX-SEP-17-2011+0_AP.bin

but SAME
i'm connecting phone with special cable and keep VOL- pressed but it's not connecting with furious Soft
...now i'm glad with new update of LGEM3 update ,it may solve my problem

Quote:

Originally Posted by llcoolr (Post 8354228)

phone powering off after LG animation logo

i've try with (LGFLASHTool_1.2.45.921) with this two versions

LGP920AT-00-V10f-EUR-XXX-AUG-12-2011+0_AP.bin
LGP920AT-00-V10k-EUR-XXX-SEP-17-2011+0_AP.bin

but SAME
i'm connecting phone with special cable and keep VOL- pressed but it's not connecting with furious Soft
...now i'm glad with new update of LGEM3 update ,it may solve my problem

Phone must be working in order to connect with our sw. As for flashing phone must be off , must press volume up and insert usb. AP is android part only. You must flash CP aswell. You find on xda developers full details on flashing plus good files

Br;)

flashed but still same

Quote:

Originally Posted by .:hack3r2k:. (Post 8354299)

flashed already with both files AP+CP using SmartFlashtool but still same "0 batt" then freez or off

Code:



00:00.0 Sec :Download Start...

00:02.0 Sec :RomBinary Download start

00:02.1 Sec :PSI RAM writing start

00:02.1 Sec :Trying to communicate with IFX modem

00:07.6 Sec :Confirm IFX communication

00:07.6 Sec :PSI RAM writing end

00:07.6 Sec :Start PSI RAM 

00:07.6 Sec :EBL writing start

00:24.1 Sec :Start EBL

00:24.1 Sec :Set capabilities to be used

00:26.1 Sec :Baudrate Change: 115200bps ===> 3000000bps

00:26.4 Sec :Set flash ID complete

00:26.4 Sec :Set Infineon CFI Information 1

00:26.4 Sec :Set Infineon CFI Information 2

00:26.4 Sec :PSI Download start

00:26.5 Sec :Set FLASH address

00:26.7 Sec :PSI Download success

00:26.7 Sec :SLB Download start

00:26.8 Sec :Set FLASH address

00:28.1 Sec :SLB Download success

00:28.1 Sec :Aeneas Download start

00:29.1 Sec :Erase was executed rightly!

00:29.2 Sec :Set FLASH address

00:32.1 Sec :Aeneas Download success

00:32.2 Sec :EMMC writing start

00:32.2 Sec :Partition size is 0 KBytes

00:32.2 Sec :Partition size is 0 KBytes

00:32.5 Sec :Success to erase

00:32.5 Sec :Partition size is 128 KBytes

00:34.0 Sec :Partition size is 0 KBytes

00:34.0 Sec :Partition size is 0 KBytes

00:34.3 Sec :Success to erase

00:34.3 Sec :Partition size is 7168 KBytes

00:37.9 Sec :Success to erase

00:37.9 Sec :Partition size is 7424 KBytes

00:42.2 Sec :Success to erase

00:42.2 Sec :Partition size is 553984 KBytes

03:01.5 Sec :Partition size is 0 KBytes

03:01.5 Sec :Partition size is 0 KBytes

03:01.5 Sec :Partition size is 0 KBytes

03:01.5 Sec :Partition size is 0 KBytes

03:01.6 Sec :Partition size is 0 KBytes

03:01.6 Sec :Partition size is 0 KBytes

03:01.6 Sec :Partition size is 0 KBytes

03:01.6 Sec :Partition size is 0 KBytes

03:01.6 Sec :RomBinary Download success

03:01.6 Sec :Target is resetting

03:01.7 Sec :Download complete

http://forum.gsmhosting.com/vbb/atta...1&d=1335384672

Bricked LG Optimus 3D (P920)

Hy guys.

I need a little help fixing my phone pls.

I follow all the steps from this tutorial, but my phone still bricked. I can start in download mode only with omap4boot flasher help.
Used flashtool in 1 phase until 28% and after that phone turn off and cant start in download mode by himself to complete 2 phase with flashtool.
With fastboot i can start download mode but after 4-5 min it turn off. I managed to flash "Boot21e_AP.bin" and "Boot21e_CP.fls" with Smartflash until download was complete, but no change. It seems that the power button does not work and the phone is dead.

I tried using "fastboot" to flash x-loader, u-boot and boot.img to the phone but I get the error "Failed (remote: partition does not exist)"

What i'm doing wrong or how can i fix my phone? PLS help ...PM or forum

here too i'm still with that dead unite

guys did unbrick your phones ? I got one to workin for 1 week but cant unbrick phone :/ Same problem as asterix83

Quote:

Originally Posted by .:hack3r2k:. (Post 8355640)

I told you must use LGFlashTool not smart flash. See [TUTORIAL] Flash BIN rom, Unbrick, Update - Optimus 3d (Service Flash software) - Mod2Xtreme

Br;)

[TUTORIAL] Unbrick Your LG Optimus 3D - xda-developers