HTC Desire 310 invalid imei & can't change CID

[nhm]

Hi

After CID change phone displays message Invalid IMEI. I managed to repair IMEI using other tools and it has been written to phone, but now I have CID error message again. I tried to change CID again using OTSmart tool but it shows me fail message:


Using library Brom_DLL_v7.1413.5
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (PreLoader USB VCOM Port (COM255))
Preparing to start flash mode;
Preparing to open COM255
Connecting;
Downloading DA;
Initializing;
Rid: f98c490c33de033daada40825f35cade
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (DA USB VCOM Port (COM254))
TRYING TO OPEN COM254;
DEVICE INFO:
BB CHIP: MT6582_S00 [CA00, 00, 6582, FF]
HW_STORAGE_EMMC: 0x4B000115 0x4D565835 0x28630142 0xAF417ECA [SIZE=0xE9880000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x62000000 SIZE: 0x87880000



Searching data;
Checking data;
Reading data failed;

Time needed - 00:00:06


I am using latest ver. 1.0.0.1079. IMEI is still in the phone even after reset or flash. There is also problem with Serial Number - it is different than on the box but it's probably related to the tool which was used for IMEI repair.

Any ideas why I cannot change CID on this phone?

Regards

[nhm]

I have also noticed that there is a strange network in WIFI settings:

NVRAM WARNING: Err = 0x10

It has full signal but when I am trying to connect it its showing "Not in range" message.

Basically strange things happens to this phone. I don't know if Invalid IMEI happened after CID change, but I suppose that somebody flashed it with SP Flash Tool before and did not unmark Preloader.

[nhm]

Can anyone help me?
Thanks in advance

[.:hack3r2k:.]

Originally Posted by nhm

Can anyone help me?
Thanks in advance

Do a READ FLASH and after try writing the dumps from the full dumps support

Br

[suchywilk]

I have exactly same problem one week ago. Customer send me Desire 310 with "hang on logo" problem. So I' ve flash mobile using SP TOOL with unchecked Preloader. Phone launch normally. After launch i've got cid problem message ( normal after flash with inproper cid). After flash imei ok and wifi work perfect. After hard reset also. So I want to remove annoying cid warning message. I used Furious to change cid. Very BIG MISTAKE. When i' ve changed cid phone work properly until next hard reset. After next hard reset show has started. Imei invalid and warning 0x10 in wifi menu. Impossible to repair with furious so I used sigmakey to imei repair and another tricks to repair wifi. After that i saw that many users have problems with cid change funcion in Desire 310. Answer is:
Never use cid change option in furious for Desire 310 if you don't want to have headake :-)

[nhm]

Originally Posted by suchywilk

Never use cid change option in furious for Desire 310 if you don't want to have headake :-)

Do you know any other option? AFAIK Furious is the only way to change CID in this model. When I changed CID number everything went fine apart form lost IMEI which I noticed after process. I have repaired IMEI using Maui META 3G and now I cannot change CID back to previous one (Maui changed CID to supercid somehow during IMEI writting process). I've also noticed Wifi message and improper serial number which cannot be restored by any tool I tried.

[nhm]

Originally Posted by .:hack3r2k:.

Do a READ FLASH and after try writing the dumps from the full dumps support

Br

I understand that by READ FLASH you mean "Read device memory" option and "dumps" mean the only one dump file in Desire's 310 folder in the support section? I just cannot find any "full dumps support".
Regards

[.:hack3r2k:.]

Originally Posted by nhm

I understand that by READ FLASH you mean "Read device memory" option and "dumps" mean the only one dump file in Desire's 310 folder in the support section? I just cannot find any "full dumps support".
Regards

I reffer the files having MEMORY_DUMP in name

Br

[nhm]

OK. I have flashed this one and phone won't switch on after that. Hovewer I flashed it again with SP Flash Tool and original firmware and it started working. No CID and NVRAM warnings but phone has different IMEI than it should have. I have changed IMEI with Maui again and this time IMEI has been written in the phone. But I still have a problem with Serial Number - cannot change it to proper one with any tool.

[.:hack3r2k:.]

Originally Posted by nhm

OK. I have flashed this one and phone won't switch on after that. Hovewer I flashed it again with SP Flash Tool and original firmware and it started working. No CID and NVRAM warnings but phone has different IMEI than it should have. I have changed IMEI with Maui again and this time IMEI has been written in the phone. But I still have a problem with Serial Number - cannot change it to proper one with any tool.

Why to use SP tool when you could have done it using OTSmart and the proper flashes from the support ! DUMP was meant to fix phone and writing correct fw after to make it power on

Br

[nhm]

Both programs flashing the same way. I have decent flash files for SP Tool which work. I flashed with OTSmart and still have the same problem. Basically,now I can change IMEI but I can't change serial number - remains the same like before (it is SN from memory dump probably). I am using Maui META 3G tool for that as FG does not have any option to repair IMEI.

[shoaibrao]

Originally Posted by .:hack3r2k:.

I reffer the files having MEMORY_DUMP in name

Br

@.:hack3r2k:.
Sir Which MEMORY_DUMP Is Suitable
For
DESIRE_310_SINGLE_SIM_1.01.862.1.osp


There Are Three MEMORY_DUMPs Are Available On Support Area

1-MEMORY_DUMP_HTC DESIRE 310_5cdc98b5dc6ee631707eaaebcaac8bf1.osp

2-ukr_MEMORY_DUMP_HTC_DESIRE_310_b2b41a4d6cded7c990b 07efa046ed1b3.osp

3-MEMORY_DUMP_HTC DESIRE 310_69ffbb4dbea371ee9110c52e3fd54bea.osp

Original CID Of My Fone Is
TELNZ001

My Problem Is After Reapir CID IMEI Invalid
After Repair IMEI Again CID Problem
After This No CID Found

Using library Brom_DLL_v7.1413.5
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek PreLoader USB VCOM (Android) (COM4))
Preparing to start flash mode;
Preparing to open COM4
Connecting;
Downloading DA;
Initializing;
Rid: 278e3f9f8d8a7e5f11ad65035be78acd
Requesting baudrate change;
Done;
USB SPEED: USB_HIGH_SPEED
Switching to DA_HIGHSPEED_VCOM;

Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver\x86;
If the detection fails, install manually the port from the device manager using usbvcom.inf;

DA_HIGHSPEED_VCOM (MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM6;
DEVICE INFO:
BB CHIP: MT6582_S00 [CA00, 00, 6582, FF]
HW_STORAGE_EMMC: 0x484A0190 0x64314734 0xA1020504 0x93413F15  [SIZE=0xE9C00000]
IMEI1 [OTP 0000]: 000000-00-000000-0
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: N/A
USRDATA INFO: 0x62000000 SIZE: 0x87C00000



Searching data;
Checking data;
CID data not found;

Time needed - 00:00:05

Thanks Anticipation

[.:hack3r2k:.]

If the phone powers on ok then is suitable

Br

[shoaibrao]

Originally Posted by .:hack3r2k:.

If the phone powers on ok then is suitable

Br

Plz Also Add IMEI Repair Option