Huawei FC-module MTK TAB NOT working - GSM-Forum

loniryan · 08-12-2017, 14:03

after FlyCaptainHuaweiModule_20155 update.. on mtk tab imei area not visible and not selectable--there is no any area for write new imei

**.:hack3r2k:.** · 08-14-2017, 12:15

Hi,

Show me an screenshot. Also which phone you connected ? Usually tab not visibel for unknown phones

Br

loniryan · 08-16-2017, 02:29

before _2055 update your software was able to repair all mtk sets which have spmeta...But now not able with any Phone inluding some huawei sets as u can see i have connected TAG-L01.....i think this update including some security patches for block non-huawei hardware but not work correctlly....wish you remove this security block and open fc module for everybrand mtk because it was so usefull for me.. i have done too many brands like gioone,generalmobile,htc,sunny and many mtk models

Br..

http://imgur.com/a/hfZ52

im using maui-meta tool now for huawei-mtk

**.:hack3r2k:.** · 08-16-2017, 09:11

Ok so then you complain about some features that were never present. You also never said it works with any of the mentioned models. You wanted to keep that info for you. We will check that tag-l01 thru

Br

loniryan · 08-16-2017, 22:03

no, this is not a complain about your products,thats just a little notify about a bug with fc module for huawei-mtk ...and a WISH as i mentioned in my previous post for supporting multibrand on fc

BR

sykotic · 08-17-2017, 02:42

Attempting to use the FC Module to unlock an Ascend y330-u05 phone gives the error "MT6572, E01" is not supported, but the website says it is. Is it me doing something wrong or is there really no support?

antoniogonzalez · 08-17-2017, 07:38

ADD Support Y3 2017 (CRO L02, CRO L22, CRO L03, CRO L23)

**.:hack3r2k:.** · 08-17-2017, 08:22

Quote:

Originally Posted by sykotic

Attempting to use the FC Module to unlock an Ascend y330-u05 phone gives the error "MT6572, E01" is not supported, but the website says it is. Is it me doing something wrong or is there really no support?

Use new mtk usb must be unchecked for that model !

Br

shh_903 · 08-20-2017, 17:38

Quote:

Originally Posted by .:hack3r2k:.

Use new mtk usb must be unchecked for that model !

Br

Sir i already use new mtk usb but frp tab is missing in new mtk also imei tabs not shown

**.:hack3r2k:.** · 08-21-2017, 18:26

Quote:

Originally Posted by shh_903

Sir i already use new mtk usb but frp tab is missing in new mtk also imei tabs not shown

Because there you can read FRP and BOOTLOADER code and instructions are given on how to use those codes to reset frp / unlock bootlaoder. Do what i said

Br

shh_903 · 08-22-2017, 10:41

Quote:

Originally Posted by .:hack3r2k:.

Because there you can read FRP and BOOTLOADER code and instructions are given on how to use those codes to reset frp / unlock bootlaoder. Do what i said

Br

Sir how can i reset frp i read frp key there is no instruction
here is logs

Searching phone...
(insert the USB cable in the powered off phone)
Phone detected (MediaTek PreLoader USB VCOM Port)
Preparing to start MTK debug mode;
Searching for debug port... (be sure drivers from support were installed!)
MTK debug mode entered
Baseband Chip: MT6737M,S01
Sw version:
Hw Version: alps-mp-n0.mp1-V1.0.2_tinno6737m.35.n_P126

Baseband Chip: MT6735, E00
Sw version: MOLY.LR9.W1444.MD.LWTG.MP.V110.5.P55
Hw Version: TINNO6737T_65_N_HW
Reading info...
IMEI 1: 359522080087919
IMEI 2: 359522085087914

Open port success!
2017-08-22 14:40:37.689 Reading data from server...
2017-08-22 14:40:38.180 Reading data from server success!
FRP KEY read success!

**.:hack3r2k:.** · 08-22-2017, 20:57

Quote:

Originally Posted by shh_903

Sir how can i reset frp i read frp key there is no instruction
here is logs

Searching phone...
(insert the USB cable in the powered off phone)
Phone detected (MediaTek PreLoader USB VCOM Port)
Preparing to start MTK debug mode;
Searching for debug port... (be sure drivers from support were installed!)
MTK debug mode entered
Baseband Chip: MT6737M,S01
Sw version:
Hw Version: alps-mp-n0.mp1-V1.0.2_tinno6737m.35.n_P126

Baseband Chip: MT6735, E00
Sw version: MOLY.LR9.W1444.MD.LWTG.MP.V110.5.P55
Hw Version: TINNO6737T_65_N_HW
Reading info...
IMEI 1: 359522080087919
IMEI 2: 359522085087914

Open port success!
2017-08-22 14:40:37.689 Reading data from server...
2017-08-22 14:40:38.180 Reading data from server success!
FRP KEY read success!

Which phone model is this !? Did you used latest exe version ?

Br

shh_903 · 08-22-2017, 21:20

Quote:

Originally Posted by .:hack3r2k:.

Which phone model is this !? Did you used latest exe version ?

Br

It is Qmobile J2 MT6737m yeah it is latest exe 0157

**.:hack3r2k:.** · 08-23-2017, 08:15

Quote:

Originally Posted by shh_903

It is Qmobile J2 MT6737m yeah it is latest exe 0157

And who told you that phone is supported ? That module is for HUAWEI PHONES ONLY !

Br

08-12-2017, 14:03	#1 (permalink)
loniryan Freak Poster Join Date: Oct 2014 Location: efs Age: 33 Posts: 496 Member: 2279944 Status: Offline Sonork: not avaliable Thanks Meter: 167	Huawei FC-module MTK TAB NOT working after FlyCaptainHuaweiModule_20155 update.. on mtk tab imei area not visible and not selectable--there is no any area for write new imei

08-14-2017, 12:15	#2 (permalink)
.:hack3r2k:. Product Manager Join Date: Aug 2002 Location: FuriouSTeaM Posts: 53,979 Member: 15022 Status: Offline Sonork: 100.53452 Thanks Meter: 61,568	Hi, Show me an screenshot. Also which phone you connected ? Usually tab not visibel for unknown phones Br Last edited by .:hack3r2k:.; 08-14-2017 at 12:24.

08-16-2017, 02:29	#3 (permalink)
loniryan Freak Poster Join Date: Oct 2014 Location: efs Age: 33 Posts: 496 Member: 2279944 Status: Offline Sonork: not avaliable Thanks Meter: 167	here you are before _2055 update your software was able to repair all mtk sets which have spmeta...But now not able with any Phone inluding some huawei sets as u can see i have connected TAG-L01.....i think this update including some security patches for block non-huawei hardware but not work correctlly....wish you remove this security block and open fc module for everybrand mtk because it was so usefull for me.. i have done too many brands like gioone,generalmobile,htc,sunny and many mtk models Br.. http://imgur.com/a/hfZ52 im using maui-meta tool now for huawei-mtk

08-16-2017, 09:11	#4 (permalink)
.:hack3r2k:. Product Manager Join Date: Aug 2002 Location: FuriouSTeaM Posts: 53,979 Member: 15022 Status: Offline Sonork: 100.53452 Thanks Meter: 61,568	Ok so then you complain about some features that were never present. You also never said it works with any of the mentioned models. You wanted to keep that info for you. We will check that tag-l01 thru Br

08-16-2017, 22:03	#5 (permalink)
loniryan Freak Poster Join Date: Oct 2014 Location: efs Age: 33 Posts: 496 Member: 2279944 Status: Offline Sonork: not avaliable Thanks Meter: 167	no, this is not a complain about your products,thats just a little notify about a bug with fc module for huawei-mtk ...and a WISH as i mentioned in my previous post for supporting multibrand on fc BR

08-17-2017, 02:42	#6 (permalink)
sykotic Junior Member Join Date: Jun 2016 Posts: 7 Member: 2585697 Status: Offline Thanks Meter: 0	Attempting to use the FC Module to unlock an Ascend y330-u05 phone gives the error "MT6572, E01" is not supported, but the website says it is. Is it me doing something wrong or is there really no support?

08-17-2017, 07:38	#7 (permalink)
antoniogonzalez No Life Poster Join Date: Aug 2005 Location: MOON Age: 43 Posts: 628 Member: 174173 Status: Offline Thanks Meter: 115	ADD Support Y3 2017 (CRO L02, CRO L22, CRO L03, CRO L23)